Materials:Foamular C200 (Type 3)

Jump to: navigation, search

Materials:Foamular C200 (Type 3)

Revision as of 21:36, 7 November 2016 by James Klassen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Owens Corning Canada
Accepted for RoofStar Guarantee Program
Date TBA
Product Summary

FOAMULAR® C200® insulation is specifically designed to provide high quality, economical insulation for conventional roofs, with single-ply, two-ply or four-ply roof membranes.

FOAMULAR® C200® insulation is an extruded, Type 3 CAN / ULC S701 polystyrene foam. It has excellent insulating characteristics (RSI-.088 per 25 mm [R 5.0 per inch] of thickness), compressive strength (140 kPa or 20 psi) and low water absorption (less than 0.7%).

FOAMULAR® C200® has a smooth, high-density skin, and a closed cell structure, with ship-lapped or square edges on four sides. It is uniform in thickness and consistency, and is easy to cut and handle. When installing, FOAMULAR® C200® can be either loose applied or attached to the substrate with mechanical fasteners, hot asphalt or adhesive. Board size is 600 mm x 2400 mm (2' x 8'), in thickness ranging from 25 mm - 100 mm (1" - 4").

Click below for the Technical Data Sheet
Technical Data Sheet



Back to Accepted Materials


Home