Difference between revisions of "Materials:JM reinforced EPDM"

Latest revision as of 22:06, 28 July 2021

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Johns Manville Corporation Accepted for RoofStar Guarantee Program 2007 Product Summary A cured EPDM membrane reinforced with a denier polyester mat, it may be installed loose-laid under ballast, fully adhered, or mechanically fastened. Installation Guidelines

Click below for the Technical Data Sheet

1.11 mm (45 mil) Membrane TDS

1.52 mm (60 mil) Membrane TDS

Revision as of 20:34, 24 August 2020 (view source) James Klassen (talk \| contribs) ← Older edit	Latest revision as of 22:06, 28 July 2021 (view source) James Klassen (talk \| contribs) m (James Klassen moved page Materials:JM reinforced EPDM Membrane to Materials:JM reinforced EPDM)
(No difference)