Difference between revisions of "Materials:Korolite 100 (Type 1, Flat)"

Latest revision as of 16:37, 16 June 2020

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Airfoam Industries Ltd. Accepted for RoofStar Guarantee Program June 2019 Product Summary Korolite 100 Type 1 EPS is a closed cell, rigid foam insulation material containing air as main ingredient. EPS insulation resists moisture, mold, and fungi with low environmental impacts, high & stable Long-Term Thermal Resistance, and good drying potential over the long service periods of buildings. Korolite 100 Type 1 EPS offers a compressive strength of 70 kPa (10 psi) and an Rsi of 0.65/25 mm (R-3.75/inch). (adapted from the Technical Data Sheet)

Click below for the Technical Data Sheet

@@ Line 9: / Line 9: @@
 | '''Manufacturer''': [http://www.airfoam.com  '''Airfoam Industries Ltd.''']
 ;:
-;Accepted for '''''RoofStar Guarantee Program''''': Date TBA
+;Accepted for '''''RoofStar Guarantee Program''''': June 2019
 ;:
-;'''Product Summary''':
+;'''Product Summary''': '''Korolite 100''' Type 1 EPS is a closed cell, rigid foam insulation material containing air as main ingredient. EPS insulation resists moisture, mold, and fungi with low environmental impacts, high & stable Long-Term Thermal Resistance, and good drying potential over the long service periods of buildings.
-SILVERCORE Type 1, 2 and 3 expanded polystyrene (EPS) manufactured by Airfoam Industries Ltd. are rigid roof insulations, are available in multiple densities and thicknesses as a component for roofing systems. SILVERCORE EPS provides consistent permanent thermal values. These products are supplied in both flat and sloped profiles. They are CBC and HCFC-free and are fully recyclable.
+:'''Korolite 100''' Type 1 EPS offers a compressive strength of 70 kPa (10 psi) and an Rsi of 0.65/25 mm (R-3.75/inch).
+:(adapted from the Technical Data Sheet)
 |}
-:Click below for the '''Technical Data Sheet''' (TBA).
+:Click below for the '''Technical Data Sheet'''
 <div style="width:150px; text-align: left;">
-:[[File:Pdf.png|150 px]]
+:[[File:Pdf.png|link=http://rpm.rcabc.org/images/4/44/Korolite_EPS_100_TDS.pdf | 150 px]]
 </div>