Difference between revisions of "Materials:Korolite 250 (Type 3, Flat)"

Latest revision as of 16:57, 16 June 2020

Notice to the Reader: The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Airfoam Industries Ltd. Accepted for RoofStar Guarantee Program June 2019 Product Summary Korolite 250 Type 3 EPS is a closed cell, rigid foam insulation material containing air as main ingredient. EPS insulation resists moisture, mold, and fungi with low environmental impacts, high & stable Long-Term Thermal Resistance, and good drying potential over the long service periods of buildings. Korolite 250 Type 3 EPS offers a compressive strength of 172 kPa (25 psi) and an Rsi of 0.74/25 mm (R-4.27/inch). (adapted from the Technical Data Sheet)

Click below for the Technical Data Sheet

@@ Line 11: / Line 11: @@
 ;Accepted for '''''RoofStar Guarantee Program''''': June 2019
 ;:
-;'''Product Summary''': '''Korolite 100''' Type 1 EPS is a closed cell, rigid foam insulation material containing air as main ingredient. EPS insulation resists moisture, mold, and fungi with low environmental impacts, high & stable Long-Term Thermal Resistance, and good drying potential over the long service periods of buildings.
+;'''Product Summary''': '''Korolite 250''' Type 3 EPS is a closed cell, rigid foam insulation material containing air as main ingredient. EPS insulation resists moisture, mold, and fungi with low environmental impacts, high & stable Long-Term Thermal Resistance, and good drying potential over the long service periods of buildings.
+:'''Korolite 250''' Type 3 EPS offers a compressive strength of 172 kPa (25 psi) and an Rsi of 0.74/25 mm (R-4.27/inch).
 :(adapted from the Technical Data Sheet)