Materials:POWERPly Endure 200 FR

Jump to: navigation, search

Materials:POWERPly Endure 200 FR

Notice to the Reader:

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance
Manufacturer
Tremco Ltd.
Accepted for the RoofStar Guarantee Program
October 2020
Accepted for application in
Waterproofing Systems (roofs)
Product Summary
POWERply Endure 200 FR
  • is an asbestos free, smooth surfaced, modified bitumen membrane.
  • consists of specially selected bitumens, modified with SBS rubber along with RET and urethane high performance elastomers and reinforced with an antiwicking fiberglass mat and scrim fabric.
  • is furnished with a factory applied white granule surfacing and a clear UV cured surface treatment designed to improve granule retention.
  • is designed for roof membrane and flashing applications in hot applied asphalt adhesives over multi-ply systems where a high strength, polyester reinforced, granule surface membrane is desired.
  • is suitable for application in cold process modified bitumen system.
  • is furnished with a factory applied white granule surfacing with a clear UV cured surface treatment designed to improve granule retention.
  • is fire rated by Underwriters Laboratories for an exterior fire hazard. Refer to UL Roofing Materials and Systems Directory for applicable system configurations.
  • meets or exceeds the requirements of
  • ASTM D 6164, Type II, Grade G
  • CSA A123.23, Type B, Grade 1.
(adapted from the Technical Data Sheet)
Click below for the Technical Data Sheet.
Technical Data Sheet

Back to Accepted Materials

Home