Materials:Retrofit Board

Jump to: navigation, search

Materials:Retrofit Board

Revision as of 22:01, 3 November 2016 by James Klassen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Johns Manville Corporation
Accepted for RoofStar Guarantee Program
Date TBA
Product Summary
Retro-Fit Board is a perlite-based utility board for use as a divorcing layer in reroofing and in new construction as a top layer in a multi-layer insulation system.
Half-inch Retro-Fit Board is a high density board made of expanded perlite and cellulosic fibres. It serves as an upgrade for wood fibre utility roofing products. The perlite particles are subjected to intense heat, which causes them to expand approximately fifteen times their original size.
The top surface is sealed with Top-Loc coating to ensure good attachment in bituminous applications. The minimum recycled content is 35% by weight.
Retro-Fit Board Insulation / Overlay
Thermal Resistance: RSI = .23 / 13 mm (R value = 1.32 / 1/2 inch)
Uses 13 mm (1/2") Retro-fit Board is a perlite-based utility board for use as a divorcing layer in reroofing and in new construction as a top layer in a multi-layer insulation system. It is not recommended for use directly over steel decks. It may be applied using hot bitumen and / or mechanical fasteners. It may be used as a primary or overlayment board.
Standards:
  • CSA A284-1976
  • CAN / CGSB 51.10-92
  • ASTM C 728
  • Factory Mutual Approved
  • Underwriters Laboratories Canada
Compressive Strength: CSA A284-1976 37 psi
Density: CSA A284-1976 13 pcf
Standard Sizes 0.6 m x 1.2 m
(24" x 48")
1.2 m x 1.2 m
(48" x 48")
1.2 m x 2.4 m
(48" x 96")
Thicknesses: 13 mm (½")
Click below for the Technical Data Sheet.
Technical Data Sheet



Back to Accepted Materials


Home