Materials:Soprarock DD

Jump to: navigation, search

Materials:Soprarock DD

Revision as of 21:48, 28 March 2024 by James Klassen (talk | contribs) (James Klassen moved page Materials:SOPRAROCK DD to Materials:Soprarock DD)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Soprema Inc.
Accepted for RoofStar Guarantee Program
Date TBA
Product Summary
SOPRAROCK STONE WOOL is a mono or dual density mineral wool fibre insulation made from basalt rock and slag. It is a non-combustible, has excellent fire resistant, and is an extremely dimensionally stable insulation with excellent acoustic properties. It is a water repellent yet vapour permeable insulation made from natural and recycled products, is impact resistant, and its thermal value and excellent physical properties make it an exceptional choice for use in the commercial roofing market in both new and re-roof applications as a primary insulation or an overlay insulation. Soprarock Stone wool contributes significant advantages to long term performance of roofing membrane assemblies.
Soprarock DD is dual-density mineral wool with a rigid upper surface for durability and enhanced strength. It is intended for use as a primary insulation in commercial, industrial, and institutional new and re-roof applications and can be mechanically fastened or hot mopped in a full bed of bitumen (see the applicable RoofStar Guarantee Standards for limitations when the material is mechanically fastened in a membrane assembly). Soprarock DD PLUS has an integral bitumen coating applied to allow for torch applied, hot applied or cold applied adhered membrane assemblies direct to the insulation without the use of a coverboard.
Thickness - mm (inches) - 25 (1”) to 150 (6”) in 12mm (1/2”) increments
Dimensions - m (ft) - .12 x 1.2 (4’ x 4’)
Long Term Thermal Resistance - Stable - ASTM C518 (C 177) - RSI Value - 0.65 (R 3.7) per 25mm (1”)
Compressive Strength - ASTM C 165
  • Top Layer at 10% - kPa (psi) 139 (20.2 psi)
  • Top Layer at 25% - kPa (psi) 252 (37.0 psi)
  • 75mm (3”) thickness - kPs (psi) 71 (10.3 psi)
  • 75mm (3”) thickness - kPa (psi) 103.5 (15psi)
Density (kg/m3) - Formed as a monolithic structure - ASTM C612-00 - Actual
  • Top Layer - 220 (13.75 lb/ft3)
  • Bottom - Layer - 160 (10.0 lb/ft3)
Dimensional Stability - Linear Shrinkage (% at 177C (350F) - ASTM C 356 - 0.01%
Water Absorption (%) - ASTM C 209 - < 1.0
Water Vapour Sorption - ASTM C 1104 - 0.03
Soprema Inc. may modify the composition of its products without prior notice. Consequently orders will be filled according to the latest specifications.
Click below for the Technical Data Sheet.
Technical Data Sheet



Back to Accepted Materials


Home