Materials:Therm 100

Jump to: navigation, search

Materials:Therm 100

Revision as of 17:06, 15 October 2019 by James Klassen (talk | contribs)
Notice to the Reader:

The roofing assembly / material information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications. The preparation of a detailed specification is the responsibility of the design authority.

Manufacturer: Tremco Ltd.
Accepted for RoofStar Guarantee Program
June 1988
Product Summary
THERM 100 is a built-up roofing system utilizing THERMastic, a proprietary eleastomeric hot melt adhesive and waterproofing compound for laminating fibreglass plies.
Ancillary products (accepted only for use with the Therm 100 system):
  • THERMglass asphalt glass felt plies (four plies, each installed in a full mopping of THERMastic.
  • Cutback Primer (Tremprime Quick Dry)
  • Mastics (ELS, Fibremat, Polyroof, Sheeting Bond and Tremlastic)
  • BURmastic base sheet (coated cold-processed felt)
  • Burmesh woven glass reinforcing membrane
  • Flashing membrane (Tremco Elastomeric Sheeting or Tremco Polytherm)
  • gravel (see the RPM for grade standards)
BUR Installation Guidelines
Click below for the Technical Data Sheet (TBA).
Technical Data Sheet



Back to Accepted Materials


Home