Difference between revisions of "SBS Fall Protection Anchor in Roof"

Revision as of 21:29, 5 August 2016

1 WORK INCLUDED

(1) Flashing: 0.08 mm (0.032", 20 gauge) Aluminum or 0.56 mm (16 oz) copper to CSA B272-93 flashing supplied by anchor manufacturer with flanges sealed by roofer.
(2) Flashing Flange: minimum 100 mm (4") flange set in coating of compatible sealant.
(3) Primary Membrane and Membrane Flashing
(4) Protected Membrane Roof Assembly: Flashing to extend a minimum 200 mm (8") above finished roof surface (pavers, ballast, or walkways)
(5) Conventional Roof Assembly: Flashing to extend a minimum 200 mm (8") above finished roof surface.
(6) Insulation: See available insulation products in the Accepted Materials section of this Manual.

2 WORK BY OTHERS

(A) Acceptable Deck: Concrete slab shown, see anchor manufacturer's attachment details for other deck types.
(B) Roof Anchor: to CSA Z91-M90
(C) Anchor Eye: to CSA Z91-M90
(D) Water Tight Cap

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Back to SBS Application

Back to SBS Construction Details

Back to Construction Details

@@ Line 2: / Line 2: @@
 === WORK INCLUDED ===
-(1) <b>Flashing</b>: 0.08 mm (0.032", 20 gauge) Aluminum or 0.56 mm (16 oz) copper to CSA B272-93 flashing supplied by anchor manufacturer with flanges sealed by roofer.
+;(1) '''Flashing''': 0.08 mm (0.032", 20 gauge) Aluminum or 0.56 mm (16 oz) copper to CSA B272-93 flashing supplied by anchor manufacturer with flanges sealed by roofer.
+;(2) '''Flashing Flange''': minimum 100 mm (4") flange set in coating of compatible sealant.
-(2) <b>Flashing Flange</b>: minimum 100 mm (4") flange set in coating of compatible sealant.
+;(3) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSBASE|'''Primary Membrane''']] and [[RoofStar Guarantee Standards for SBS Roof Systems#SBSBASE|'''Membrane Flashing''']]
+;(4) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSPMRA|'''Protected Membrane Roof Assembly''']]: Flashing to extend a minimum 200 mm (8") above finished roof surface (pavers, ballast, or walkways)
-(3) <b>Membrane Flashing / Stripping & Primary Membrane</b>
+;(5) [[RoofStar Guarantee Standards for SBS Roof Systems#SBS-STRIPPING|'''Conventional Roof Assembly''']]: Flashing to extend a minimum 200 mm (8") above finished roof surface.
+;(6) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSINSULATION|'''Insulation''']]: See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
-(4) <b>Protected Membrane Roof Assembly</b>: Flashing to extend a minimum 200 mm (8") above finished roof surface (pavers, ballast, or walkways)
-(5) <b>Conventional Roof Assembly</b>: Flashing to extend a minimum 200 mm (8") above finished roof surface.
-(6) <b>Insulation</b>
 === WORK BY OTHERS ===
-(A) <b>Acceptable Deck</b>: Concrete slab shown, see anchor manufacturer&#8217;s attachment details for other deck types.
+;(A) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSDECKS|'''Acceptable Deck''']]: Concrete slab shown, see anchor manufacturer's attachment details for other deck types.
+;(B) '''Roof Anchor''':to CSA Z91-M90
-(B) <b>Roof Anchor </b>to CSA Z91-M90
+;(C) '''Anchor Eye''': to CSA Z91-M90
+;(D) '''Water Tight Cap'''
-(C) <b>Anchor Eye</b> to CSA Z91-M90
-(D) <b>Water Tight Cap</b>
-'''NOTE''': Refer to <i>RGC Guarantee Standards</i> for additional requirements.
+'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.