Difference between revisions of "SBS Fall Protection Anchor in Wall (Protected)"

Jump to: navigation, search

Difference between revisions of "SBS Fall Protection Anchor in Wall (Protected)"

(RELATED WORK BY OTHERS)
(RELATED WORK BY OTHERS)
Line 21: Line 21:
  
 
<hr>
 
<hr>
 
  
  

Revision as of 17:56, 8 August 2016

10.3.7.3.jpg

1 WORK INCLUDED

(1) Inverted (Protected) Roof Assembly
(2) Counter-flashing
(3) Insulation - XPS
See available insulation products in the Accepted Materials section of this Manual.
(4) Primary Membrane

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Anchor
to CSA Z91-M90 - Poured concrete shown, see anchor manufacturer's attachment for other wall types and attachment methods.
(C) Anchor Eye
to CSA Z91-M90
(D) Anchor Placement For Roof Decks Accessible By General Public/Residential Occupants
Maximum 100 mm (4") above finished roof surface (design to prevent climbing) and not less than 3-1/2" above the finished roof surfacing.
(E) Plywood
15.9 mm (5/8") treated where required.


NOTE: Refer to RoofStar Guarantee Standards for additional requirements.




Back to SBS Application

Back to SBS Construction Details

Back to Construction Details