SBS Fall Protection Anchor in Wall (Protected)

Jump to: navigation, search

SBS Fall Protection Anchor in Wall (Protected)

Revision as of 18:34, 27 June 2022 by James Klassen (talk | contribs) (James Klassen moved page SBS 11.3.5-3 Roof Anchors (PMRA) to SBS Fall Protection Anchor in Wall (Protected))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Division D - Construction Details

SBS | Fall Protection Anchor in Wall (Protected Roof System) ( Article

Notice to Reader
Images used in a Construction Detail are representative and not prescriptive, and are not necessarily drawn to scale. They are intended to support the related Standard (Ref. Division A, Article

The reader may link to the related Article in the detail title, or link to the Standard as it relates to a specific element in the detail. All hyperlinks are displayed blue text.

SBS Details


(1) Inverted (Protected) Roof Assembly
(2) Counter-flashing
(3) Insulation - XPS
See available insulation products in Division C of this Manual.
(4) Primary Membrane


(A) Acceptable Supporting Deck Structure
(B) Anchor
Anchor selection and attachment details are the responsibility of the Design Authority.
(C) Anchor Eye
(D) Anchor Placement For Roof Decks Accessible By General Public/Residential Occupants
Maximum 100 mm (4") above finished roof surface (design to prevent climbing) and not less than 3-1/2" above the finished roof surfacing.
(E) Plywood
15.9 mm (5/8") treated where required.

NOTE: See the Standard for additional requirements.

Back to "SBS" Roof System Details


© RCABC 2023
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC.