Difference between revisions of "SBS Low Door Opening"

Jump to: navigation, search

Difference between revisions of "SBS Low Door Opening"

(RELATED WORK BY OTHERS)
(WORK INCLUDED)
Line 13: Line 13:
 
<div class="col-md-6">
 
<div class="col-md-6">
 
=== WORK INCLUDED ===
 
=== WORK INCLUDED ===
;(1) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Air/Vapour barrier''']]: Self-adhered membrane, as specified in design.  Install following manufacturer’s requirements.
+
;(1) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#AIRVAPOUR|'''Air/Vapour barrier''']]: Self-adhered membrane, as specified in design.  Install following manufacturer’s requirements.
;(2) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Roof system''']]: Conventionally insulated system shown (refer to the membrane Standard for requirements).
+
;(2) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#GENERAL|'''Roof system''']]: Conventionally insulated system shown (refer to the membrane Standard for requirements).
;(3) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Field Membrane''']]: SBS-modified bituminous system shown (see Part 9 for standards)
+
;(3) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#MEMBRANES|'''Field Membrane''']]: SBS-modified bituminous system shown (see Part 9 for standards)
;(4) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Self-adhered membrane (pre-flashing)''']]: Apply over rough sill or sill woodwork.  Prime as required.
+
;(4) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#PERIMETERS|'''Self-adhered membrane (pre-flashing)''']]: Apply over rough sill or sill woodwork.  Prime as required.
;(5) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Metal water-stop flashing''']]: Dimensions as specified in design.  Mechanically attach to inside face of door sill.  Cut flashing to fit opening width.
+
;(5) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#DOOR|'''Metal water-stop flashing''']]: Dimensions as specified in design.  Mechanically attach to inside face of door sill.  Cut flashing to fit opening width.
;(6) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Membrane flashing''']]: Base membrane shown.  Install to overlap and seal in metal water-stop flashing.
+
;(6) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#PERIMETERS|'''Membrane flashing''']]: Base membrane shown.  Install to overlap and seal in metal water-stop flashing.
;(7) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Membrane gussets''']]: Install in corners to seal joints.
+
;(7) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#DOOR|'''Membrane gussets''']]: Install in corners to seal joints.
;(8) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Metal base flashing (under door)''']]: Optional; protection for membrane when pavers are installed (shown), or when exposed membrane is vulnerable to damage.  Mechanical fasteners must be at least 87.5 mm (3-1/2”) above the drainage plane.
+
;(8) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#CAPCOUNTERBASE|'''Metal base flashing (under door)''']]: Optional; protection for membrane when pavers are installed (shown), or when exposed membrane is vulnerable to damage.  Mechanical fasteners must be at least 87.5 mm (3-1/2”) above the drainage plane.
;(9) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Membrane flashing''']]: Applicable for exterior-insulated walls.  Seals roof membrane flashing to air/vapour barrier on wall and provides sufficient exposure for positive union with WRB (by others).  Mechanically secure membrane (metal base flashing used for securement in this detail).
+
;(9) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#PERIMETERS|'''Membrane flashing''']]: Applicable for exterior-insulated walls.  Seals roof membrane flashing to air/vapour barrier on wall and provides sufficient exposure for positive union with WRB (by others).  Mechanically secure membrane (metal base flashing used for securement in this detail).
;(10) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Metal base flashing (walls)''']]: Optional; protects membrane flashing from damage, and functions as removable panel to permit access to membrane flashing for future replacement.
+
;(10) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#CAPCOUNTERBASE|'''Metal base flashing (walls)''']]: Optional; protects membrane flashing from damage, and functions as removable panel to permit access to membrane flashing for future replacement.
;(11) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#|'''Pavers and pedestals''']]: May be installed by others, if specified.  See Part 14 for material and application requirements.  Must be at least 12 mm (1/2”) away from other pavers, and from membrane flashing or metal base flashing, to permit adequate drainage.
+
;(11) [[RoofStar Guarantee Standard for SBS-Modified Bitumen Membrane Systems#PLATFORM|'''Pavers and pedestals''']]: May be installed by others, if specified.  See '''Part 14''' for material and application requirements.  Must be at least 12 mm (1/2”) away from other pavers, and from membrane flashing or metal base flashing, to permit adequate drainage.
  
 
<hr>
 
<hr>

Revision as of 15:12, 3 February 2021

RoofStar Guarantee Standards are blue-linked
SBS Details

1 WORK INCLUDED

(1) Air/Vapour barrier
Self-adhered membrane, as specified in design. Install following manufacturer’s requirements.
(2) Roof system
Conventionally insulated system shown (refer to the membrane Standard for requirements).
(3) Field Membrane
SBS-modified bituminous system shown (see Part 9 for standards)
(4) Self-adhered membrane (pre-flashing)
Apply over rough sill or sill woodwork. Prime as required.
(5) Metal water-stop flashing
Dimensions as specified in design. Mechanically attach to inside face of door sill. Cut flashing to fit opening width.
(6) Membrane flashing
Base membrane shown. Install to overlap and seal in metal water-stop flashing.
(7) Membrane gussets
Install in corners to seal joints.
(8) Metal base flashing (under door)
Optional; protection for membrane when pavers are installed (shown), or when exposed membrane is vulnerable to damage. Mechanical fasteners must be at least 87.5 mm (3-1/2”) above the drainage plane.
(9) Membrane flashing
Applicable for exterior-insulated walls. Seals roof membrane flashing to air/vapour barrier on wall and provides sufficient exposure for positive union with WRB (by others). Mechanically secure membrane (metal base flashing used for securement in this detail).
(10) Metal base flashing (walls)
Optional; protects membrane flashing from damage, and functions as removable panel to permit access to membrane flashing for future replacement.
(11) Pavers and pedestals
May be installed by others, if specified. See Part 14 for material and application requirements. Must be at least 12 mm (1/2”) away from other pavers, and from membrane flashing or metal base flashing, to permit adequate drainage.

2 RELATED WORK BY OTHERS

(A) Wall and cladding
Generic and representative only.
(B) WRB (Water Resistant Barrier)
Generic and representative only.
(C) Door and jamb assembly
Generic and representative only.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.




Back to RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies

Back to SBS Modified Bitumen Construction Details

Back to Construction Details