Difference between revisions of "SBS Parapet-Wall Connection"

Revision as of 21:35, 29 July 2016

1 WORK INCLUDED

(1) Gypsum Board: If required by design authority.
(2) Vapour Retarder: If required by design authority.
(3) Insulation: See list of Accepted Materials.
(4) Insulation Overlay Board: As required.
(5) Primary Membrane and Membrane Protection
(6) ;Membrane Flashing (attachment & termination)

Mechanically fasten at terminations.  At least one ply must extend over outside edge.

(7) Metal Base Flashing: Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats.
(8) Metal Cap Flashing: Must overlap exterior wall finish. Fasten with concealed clip-type fasteners or cladding screws evenly spaced between seams.
(9) Wall Tie-in: Minimum 2 mm (0.078") self-adhered modified bitumen or flexible membrane manufacturers approved detail.
(10) Metal Counter-flashing

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Air/Vapour Seal
(C) Acceptable Wall Surface
(D) Wood Blocking
(E) Sloped Wood Blocking: Required over 100 mm (4") parapet width.
(F) Wall Sheathing Membrane: Minimum 1 mm (0.040") self-adhered modified bitumen.
(G) Wall Cladding

NOTE: Refer to RGC Guarantee Standards for additional requirements.

Back to SBS Application

Back to SBS Construction Details

Back to Construction Details

@@ Line 3: / Line 3: @@
 === WORK INCLUDED ===
-(1) <b>Gypsum Overlay Board: </b>If required by design authority.
+;(1) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSSUBSTRATES|'''Gypsum Board''']]: If required by design authority.
+;(2) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSVAPOUR|'''Vapour Retarder''']]:If required by design authority.
-(2) <b>Vapour Retarder</b>: If required by design authority.
+;(3) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSINSULATION|'''Insulation''']]:
+:See list of '''[[Section:C. Accepted Materials|Accepted Materials]]'''.
-(3) <b>Insulation:</b> See list of accepted materials in Section 2.2.
+;(4) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSINSULATIONOVERLAY|'''Insulation Overlay Board''']]:
+:As required.
-(4) <b>Insulation Overlay</b>: As required. See <i>RGC Guarantee Standard B4.1, B4.2 </i>and<i> C4.1</i>
+;(5) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSBASE|'''Primary Membrane and Membrane Protection''']]:
+;(6) ;[[RoofStar Guarantee Standards for SBS Roof Systems#SBSSTRIPTERM|'''Membrane Flashing (attachment & termination)''']]:
-(5) <b>Primary Membrane and Membrane Protection</b>
+ Mechanically fasten at terminations.  At least one ply must extend over outside edge.
+;(7) [[RoofStar Guarantee Standards for SBS Roof Systems#METALCAP-SBS|'''Metal Base Flashing''']]: Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats.
-(6) <b>Membrane Flashing:</b> Mechanically fasten at terminations.  At least one ply must extend over outside edge. See <i>RGC Guarantee Standard A5.6</i>
+;(8) [[RoofStar Guarantee Standards for SBS Roof Systems#METALCAP-SBS|'''Metal Cap Flashing''']]: Must overlap exterior wall finish.  </i>Fasten with  concealed clip-type fasteners  <b>or</b> cladding screws evenly spaced between seams.
+;(9) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSWALLTIEIN|'''Wall Tie-in''']]: Minimum 2 mm (0.078") self-adhered  modified bitumen or flexible membrane manufacturers approved detail.
-(7)<b> Metal Base Flashing:</b> Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats. See <i>RGC Guarantee Standard A6.9</i>
+;(10) [[RoofStar Guarantee Standards for SBS Roof Systems#METALCAP-SBS|'''Metal Counter-flashing''']]:
-(8) <b>Metal Cap Flashing:</b> Must overlap exterior wall finish. See <i>RGC Guarantee Standard A6.9 </i>Fasten with  concealed clip-type fasteners  <b>or</b> cladding screws evenly spaced between seams. See <i>RGC Guarantee Standard A6.10.</i>
-(9) <b>Wall Tie-In Membrane:</b> Minimum 2 mm (0.078") self-adhered  modified bitumen or flexible membrane manufacturer&#8217;s approved detail.
-(10) <b>Metal Counter Flashing</b>
 === RELATED WORK BY OTHERS ===
-(A) <b>Acceptable Deck</b>
+;(A) [[RoofStar Guarantee Standards for SBS Roof Systems#SBS-STEELDECK|'''Acceptable Deck''']]
+;(B) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSVAPOUR|'''Air/Vapour Seal''']]
-(B) <b>Air / Vapour Seal</b>
+;(C) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSWALLSUB|'''Acceptable Wall Surface''']]
+;(D) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSWOODBLOCKING|'''Wood Blocking''']]
-(C) <b>Acceptable Wall Surface</b>
+;(E) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSSLOPEDWOODBLOCKING|'''Sloped Wood Blocking''']]
+:Required over 100 mm (4") parapet width.
-(D) <b>Wood Blocking</b>
+;(F) [[RoofStar Guarantee Standards for SBS Roof Systems#SBS-STRIPPING|'''Wall Sheathing Membrane''']]: Minimum 1 mm (0.040") self-adhered modified bitumen.
+;(G) <b>Wall Cladding</b>
-(E) <b>Sloped Wood Blocking:</b> Required over 100 mm (4") parapet width. See <i>RGC Guarantee Standard A6.9</i>
-(F) <b>Wall Sheathing Membrane</b>
-(G) <b>Wall Cladding</b>