Difference between revisions of "SBS Parapet (Typical)"

Jump to: navigation, search

Difference between revisions of "SBS Parapet (Typical)"

(RELATED WORK BY OTHERS)
(RELATED WORK BY OTHERS)
Line 22: Line 22:
  
 
;(A) [[RoofStar Guarantee Standards for SBS Roof Systems#SBS-STEELDECK|'''Acceptable Steel Deck''']]
 
;(A) [[RoofStar Guarantee Standards for SBS Roof Systems#SBS-STEELDECK|'''Acceptable Steel Deck''']]
;(B) ;[[RoofStar Guarantee Standards for SBS Roof Systems#SBSVAPOUR|'''Air/Vapour Seal''']]
+
;(B) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSVAPOUR|'''Air/Vapour Seal''']]
 
;(C) <b>Acceptable Wall Surface</b>
 
;(C) <b>Acceptable Wall Surface</b>
 
;(D) <b>Wood Blocking</b>  
 
;(D) <b>Wood Blocking</b>  

Revision as of 14:50, 19 July 2016

10.3.1.1.jpg

1 WORK INCLUDED

1. Gypsum Board
If required by design authority.
2. Vapour Retarder
If required by design authority.
3. Insulation
See list of Accepted Materials.
4. Insulation Overlay Board
As required.
5. Primary Membrane and Membrane Protection
6. Membrane Flashing
Mechanically fasten to outside face of parapet blocking (D). At least one ply must extend over outside edge.
7. Metal Base Flashing
Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats.
8. Metal Cap Flashing
Flashings 1 and 2 may be one piece. Fasten with continuous concealed clip-type fasteners or cladding screws evenly spaced between seams.

2 RELATED WORK BY OTHERS

(A) Acceptable Steel Deck
(B) Air/Vapour Seal
(C) Acceptable Wall Surface
(D) Wood Blocking
(E) Sloped Wood Blocking: Required over 100 mm (4") parapet width. See RGC Guarantee Standard A6.9

NOTE: Refer to RGC Guarantee Standards for additional requirements.]





Back to SBS Application

Back to SBS Construction Details

Back to Construction Details