Difference between revisions of "TPO Roof System Details"

Jump to: navigation, search

Difference between revisions of "TPO Roof System Details"

(AIR and VAPOUR CONTROLS)
(GENERAL)
Line 24: Line 24:
  
 
====GENERAL====
 
====GENERAL====
:[[TPO Details:D3.7.1-1 Assemblies (Insulated Conventional)|D3.7.1-1 Assemblies (Insulated Conventional)]]
+
:[[TPO 1.3.1-1 Conventionally Insulated System (mechanically attached)| TPO 1.3.1-1 Conventionally Insulated System (mechanically attached)]]
:[[TPO Details:D3.7.1-2 Assemblies (Ballasted Protected Membrane)|D3.7.1-2 Assemblies (Ballasted Protected Membrane)]]
+
:[[TPO 1.3.1-2 Conventionally Insulated System (adhered)| TPO 1.3.1-2 Conventionally Insulated System (adhered)]]
:[[TPO Details:D3.7.1-3 Assemblies (Fully Adhered)|D3.7.1-3 Assemblies (Fully Adhered)]]
+
:[[TPO 1.3.1-3 Protected Membrane Roof Assembly (typical)| TPO 1.3.1-3 Protected Membrane Roof Assembly (typical)]]
  
 
====SUPPORTING STRUCTURES: Decks and Walls====
 
====SUPPORTING STRUCTURES: Decks and Walls====

Revision as of 19:42, 18 February 2020

Editor's note
This page is currently under revision, as the details are renumbered and new details and printable detail pages are added. Continue to watch for further updates to the this page and the displayed links.
The drawings contained within this section are intended to represent a variety of thermoplastic roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
For further information about thermoplastic (TPO) membrane system designs and requirements, see TPO (Thermoplastic) Membrane Systems.
TPO-PVC Link Drawing.jpg

Pdf.png

NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.


1 GENERAL

TPO 1.3.1-1 Conventionally Insulated System (mechanically attached)
TPO 1.3.1-2 Conventionally Insulated System (adhered)
TPO 1.3.1-3 Protected Membrane Roof Assembly (typical)

2 SUPPORTING STRUCTURES: Decks and Walls

3 SECURING the ROOF ASSEMBLY

4 MATERIALS

5 DECK and WALL OVERLAYS

6 AIR and VAPOUR CONTROLS

6.3.1 Air and Vapour Controls (field)

7 INSULATION

8 INSULATION OVERLAYS

9 FIELD MEMBRANE

10 PERIMETERS and WALLS


11 DRAINS and PENETRATIONS

12 PROTECTED MEMBRANES and OTHER DETAILS

13 METAL FLASHINGS

14 THE ROOF as a PLATFORM