Difference between revisions of "WP Details:F1.7.6 (Walls - Planter Pre-Curb Wall)"
Difference between revisions of "WP Details:F1.7.6 (Walls - Planter Pre-Curb Wall)"
(Created page with "<hr> File:9.6.6.jpg ;WORK INCLUDED (1) <b>Primary Waterproofing Membrane</b>: Fully adhered to acceptable substrates (concrete slab depicted), installed as per <i>RGC Gu...") |
|||
| Line 2: | Line 2: | ||
[[File:9.6.6.jpg]] | [[File:9.6.6.jpg]] | ||
| − | + | ||
| + | ==== WORK INCLUDED ==== | ||
(1) <b>Primary Waterproofing Membrane</b>: Fully adhered to acceptable substrates (concrete slab depicted), installed as per <i>RGC Guarantee Standards E </i>and Membrane Manufacturer's installation specifications. | (1) <b>Primary Waterproofing Membrane</b>: Fully adhered to acceptable substrates (concrete slab depicted), installed as per <i>RGC Guarantee Standards E </i>and Membrane Manufacturer's installation specifications. | ||
| Line 17: | Line 18: | ||
(7) <b>Plaza Deck Assembly: </b>Extruded polystyrene insulation and filter mat (optional) over primary waterproofing membrane. Concrete pavers placed above pre-curb membrane flashing height on proprietary pedestals. <b>Note:</b> membrane and metal wall counter flashing is not required above pre-curb membrane flashing on plaza deck side of planter walls. | (7) <b>Plaza Deck Assembly: </b>Extruded polystyrene insulation and filter mat (optional) over primary waterproofing membrane. Concrete pavers placed above pre-curb membrane flashing height on proprietary pedestals. <b>Note:</b> membrane and metal wall counter flashing is not required above pre-curb membrane flashing on plaza deck side of planter walls. | ||
| − | + | ||
| + | ==== RELATED WORK BY OTHERS ==== | ||
(A) <b>Acceptable Deck</b>: Concrete slab shown | (A) <b>Acceptable Deck</b>: Concrete slab shown | ||
Revision as of 17:34, 23 December 2015
1 WORK INCLUDED
(1) Primary Waterproofing Membrane: Fully adhered to acceptable substrates (concrete slab depicted), installed as per RGC Guarantee Standards E and Membrane Manufacturer's installation specifications.
(2) Membrane Primer or Adhesive: proprietary primer or adhesive, application and quantities as directed by membrane manufacturers published application specifications.
(3) Pre-Curb (Start-Up Curb) Membrane Flashing: Two ply of membrane flashing (elastomeric, plastomeric, or modified bituminous) completely enclosing pre-curb and installed as per membrane manufacturer's published application specifications. Install membrane reinforcement gussets at all corner detail transitions.
(4) Proprietary liquid membrane flashing System: RGC accepted Liquid Membrane Flashing System(s) (Refer to RPM Section2.2 for accepted systms. Install as per Manufacturer's published instructions.
(5) Inside Planter Wall Membrane Flashing: Adhered according to manufacturer's specifications. Carry membrane flashing plies to reglet termination near top of planter wall (stagger membrane seal minimum 300mm (6").
(6) Reglet Metal Counter Flashing: As required by RGC Guarantee Standards E. (7) Plaza Deck Assembly: Extruded polystyrene insulation and filter mat (optional) over primary waterproofing membrane. Concrete pavers placed above pre-curb membrane flashing height on proprietary pedestals. Note: membrane and metal wall counter flashing is not required above pre-curb membrane flashing on plaza deck side of planter walls.
2 RELATED WORK BY OTHERS
(A) Acceptable Deck: Concrete slab shown
(B) Pre- Curb: Minimum of 100mm (4") in height above concrete deck, smooth dry and clean.
(C) Cast over Concrete Planter Wall: Form on top of membrane sealed Pre-curbs or Start-up curbs.
(D) Re-Bar: Placed at centre of Pre-curb.
(E) Reglet: Premanufactured purpose-made reglet cast in concrete wall or saw-cut.
(F) Alternate Termination: Horizontal Reglet alternative to premanufactured purpose-made reglet cast in concrete wall or saw-cut on vertical surface of inside planter walls.
NOTE: Refer to RGC Guarantee Standards E for additional requirements.
Back to Waterproofing Application