View source for SBS Fall Protection Anchor in Wall (Protected)

[[File:10.3.7.3.jpg]]

=== WORK INCLUDED ===
;(1) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSPMRA|'''Inverted (Protected) Roof Assembly''']]
;(2) [[RoofStar Guarantee Standards for SBS Roof Systems#METALCAP-SBS|'''Counter-flashing''']]
;(3) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSINSULATION|'''Insulation - XPS''']]: See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
;(4) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSBASE|'''Primary Membrane''']]

<hr>

=== RELATED WORK BY OTHERS ===
;(A) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSDECKS|'''Acceptable Deck''']]
;(B) '''Anchor''': to CSA Z91-M90 - Poured concrete shown, see anchor manufacturer's attachment for other wall types and attachment methods.
;(C) '''Anchor Eye''': to CSA Z91-M90
;(D) '''Anchor Placement For Roof Decks Accessible By General Public/Residential Occupants''': Maximum 100 mm (4") above finished roof surface (design to prevent climbing) and not less than 3-1/2" above the finished  roof surfacing.
;(E) '''Plywood''': 15.9 mm (5/8") treated where required.


'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.


<hr>




[[Section:D. Application: Low Slope Roofs|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''SBS Application'']]

[[SBS Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''SBS Construction Details'']]

[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Construction Details'']]