View source for LMF Metal Cap Flashing (inside corner)

<div class="panel panel-success">
<div class="panel-heading"><big>'''Metal Flashing Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<div style="text-align:center; vertical-align:center">
[[File:10.2.1.1.jpg|class=img-responsive]]
</div>
</div><!-- COL-MD-6 -->

<div class="col-md-6">
=== WORK INCLUDED ===
(1) <b>Metal Cant Flashing:</b> Standing seam required at corners of cant. See {{hilite | RGC Guarantee Standard A6.8 || 2016-November-19 }}.

(2) <b>Metal Base Flashing:</b> Vertical runs over 100 mm (4") require standing seam or S-lock corners. See {{hilite | RGC Guarantee Standard A6.8 || 2016-November-19 }}.  Cross-breaks and cladding-type fasteners are optional.

(3) <b>Double </b><b>S-Lock Corner</b>: Fastened through concealed flanges to top of parapet. See {{hilite | RGC Guarantee Standard A6.8 || 2016-November-19 }}.

(4) <b>Metal Cap Flashing &#8211; Interior Face:</b> Fastened with continuous clips or cladding screws evenly spaced between seams. Over 100 mm (4") width requires standing seam. See {{hilite | RGC Guarantee Standard A6.10 || 2016-November-19 }} for requirements.

(5) <b>Seam:</b> Lap seam is acceptable if vertical distance is not more than 100 mm (4"). See {{hilite | RGC Guarantee Standard A6.8 || 2016-November-19 }}

(6) <b>Metal Cap Flashing &#8211; Top Face:</b> Over 100 mm (4") width must provide positive slope to roof area. See {{hilite | RGC Guarantee Standard A6.9 || 2016-November-19 }}

(7) <b>Standing Seam</b>

(8) <b>Metal Cap Flashing &#8211; Outside Face:</b> Corner standing seams may be folded flat on outside face only.  Fasten with continuous concealed clip-type fasteners <b>or</b> cladding screws evenly spaced between seams. See {{hilite | RGC Guarantee Standard A6.10 || 2016-November-19 }} for requirements.</i>


=== RELATED WORK BY OTHERS ===
(A) <b>Acceptable Parapet</b>

(B) <b>Sloped Blocking: </b> Required over minimum 100 mm (4") parapet width. See {{hilite | RGC Guarantee Standard A6.9 || 2016-November-19 }}
</div><!-- COL-6-MD -->
</div><!-- PANEL BODY -->
</div><!-- PANEL -->

'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.

<hr>




[[Metal Flashing Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Metal Flashing Details'']]

[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Construction Details'']]