View source for Template:All Systems - MEMBRANES EPDM, TPO

__NOTOC__
===Application===
====Wood Decks====
RoofStar-accepted cold adhesive applied membranes installed over wood surfaces to manufacturers&rsquo; product installation specifications. Self-adhered membranes must not be installed on contaminated wood surfaces. A minimum 9.5 mm (3/8") nominal thick plywood sheeting (overlay) must be installed over all contaminated wood surface (eg. asphalt) to receive self-adhered membranes. Metal wall base flashing is optional with these application methods.

==== Mechanically Attached ====
All mechanically fastened flexible membrane systems installed under RoofStar Guarantee shall conform to the CSA A123.21 Standard test method (latest edition) for the dynamic wind uplift resistance of mechanically attached membrane roofing systems.
<div id=EPDMADHESIVE></div>
<div id=TPOADHESIVE></div>

==== Adhered Membranes ====
On all adhered flexible membrane roof slopes that exceed 1:24 (½" in 12"), the manufacturer's published instructions are to be followed regarding mechanical fastening and/or back nailing of sheets, and the size and direction of sheet application to the direction of roof slope.

=== Protected and Modified Protected Membranes ===

{{All Systems - Protected and Modified Protected Membranes}}

<div id=ROOFTOP GARDENS, PLANTERS & WALKWAYS></div>