View source for Asphalt Shingles - Application (Common and Steep Slopes)

{{Template:RPM Info}}

{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
__NOTOC__

<big><big>Division D - Construction Details</big></big>
<hr>
<big><big><big><big><big>Asphalt Shingles | Application (Common and Steep Slopes) ([[Asphalt_Shingle_Systems_Standard#9.3.2.4. General Requirements for Asphalt Shingle Application | Article 9.3.2.4.]])</big></big></big></big></big>
{{Template:Construction Details Header}}
<div class="panel panel-success">
<div class="panel-heading"><big>'''Asphalt Shingle Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<div style="text-align:center; vertical-align:center">
<big>Applicable to slopes 1:3 (4" in 12") and greater.</big>
[[File:7.1.2.1.1.jpg| link= http://rpm.rcabc.org/images/6/6f/7.1.2.1.1.jpg | class=img-responsive]]
</div>
</div><!-- COL-MD-6 -->

<div class="col-md-6">
=== WORK INCLUDED ===
;(1) [[Asphalt Shingle Systems Standard|'''Eave Protection''']]: One ply of self-adhered modified bituminous underlayment material or other acceptable eaves protection.  Lap 75 mm (3") minimum on sides and 150 mm (6") minimum on ends.
;(2) [[Asphalt Shingle Systems Standard#AShUNDERLAYMENT|'''Underlayment''']]: Minimum one ply of No. 15 non-perforated asphalt saturated felt or accepted eaves protection. Overlap 50 mm (2") minimum on side laps and 150 mm (6") minimum on end laps.
;(3) [[Asphalt Shingle Systems Standard#AShPERIM-GEN-APPLICATION|'''Edge Metal Flashing''']]: Required for all eave and rake edges.
;(4) [[Asphalt Shingle Systems Standard#AShPART9GEN-APPLICATION|'''Starter Course''']]: '''Standard strip, laminated or architectural shingle''' starter course consists of proprietary starter shingles or (in the case of strip shingles) the same type shingles used in the field.  Install according to requirements in Subsection '''9.3.1 General''', together with the Manufacturer's printed application instructions.
;(5) '''Standard Strip, Laminated or Architectural Shingles''': Applied as recommended by manufacturer.
;(6) [[Asphalt Shingle Systems Standard#AShSECUREMENT|'''Nailing''']]:  See the requirements in Section '''3.3 Application'''.

<hr>

=== RELATED WORK BY OTHERS ===
;(A) [[Asphalt Shingle Systems Standard#AShDECKS|'''Acceptable Deck''']]
</div><!-- COL-6-MD -->
</div><!-- PANEL BODY -->
</div><!-- PANEL -->

'''NOTE''': See the [[Asphalt Shingle Systems Standard | '''Standard''']] for additional requirements.

<hr>

[[Asphalt Shingle System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Asphalt Shingle System Details'']]

[[Main Page | <i class="fa fa-home fa"></i> Home]]

{{Tempate:RPM Page Footer with Copyright and Current Date}}