View source for Materials:(Lam) Berridge T-Panel

__NOTOC__
__NONUMBEREDHEADINGS__
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}

<big><big>Division C - Accepted Materials</big></big>
<hr>
<big><big><big><big><big>Berridge T-Panel</big></big></big></big></big><br>
<big><big><big>by Lam Metal Contracting Ltd.</big></big></big><br>
{| class="wikitable"
|-
| style="background-color: #ffffcc; column-width:100%" | The metal panel listed and described below is accepted for use in the '''''RoofStar Guarantee Program'''''.
|}
{| class="wikitable"
|-
| 
;'''Manufacturer''': Lam Metal Contracting Ltd.
;'''Contact Address''': See the current Membership list and contact information at [http://www.rcabc.org/members/find-a-member/ www.rcabc.org]
;'''Product Group - Standing Seam Metal Roof System'''
;'''Panel Machine''':
;'''Panel Name''': Berridge T-Panel
;'''Seam Type''': Snap Lock

The roofing assembly / material information published below and in the [http://{{SERVERNAME}}/index.php?title=Main_Page RCABC Roofing Practices Manual] DOES NOT represent a complete set of the manufacturer's published data, nor does it represent a detailed specification. The preparation of a detailed specification is the responsibility of the design authority.  For more information about this product or system, consult the manufacturer.
|}

====OVERVIEW====
Lam Metal Berridge T-Panel can be roll formed as straight, tapered or curved to any radius greater than 10&#8217; in continuous length from a coil. Panel width is 12 &#190;" (324 mm) with a <sup>5</sup>/<sub>8</sub>" (16 mm) leg, and a nominal 1" (25 mm) seam height after clipping on the Snap-On Seam.

====SYSTEM DESCRIPTION====
#'''General''': Berridge T-Panel employ a hidden fastening system for securement to a solid substrate.  Panel seams are covered by extruded vinyl weatherseal to prevent siphoning or flooding over seam and the panels are seamed together by Snap-On Seam. 
#'''Range of application''': on wood or metal sloped roofs; in commercial, institutional, industrial and residential construction; for re-roofing or new construction.  
#'''Fasteners (Screws)''': Use 11 gauge 1&#188;" galvanized roofing for installation over wood, and use #10 x 1&#188;" pancake head tek screws for installation over metal. One fastener per clip @ minimum 20" O.C. 
#'''Panel Clips''': One piece assembly consisting of a No. 26 GA minimum thick coated steel base approximately 1" wide x 2" long as manufactured by Berridge Manufacturing in Denver, USA.
#'''Deck Requirements''': in keeping with the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].

====PROFILE====
N/A

====TECHNICAL DATA SHEET====
N/A

====SITE CONDITIONS====
#Minimum roof slope is 1:4 (3" in 12"). Severe conditions (heavy snow or ice) minimum slope is 1:1.5 (8" in 12"). 

====PERFORMANCE REQUIREMENTS====
<ol>
<li>'''Wind Uplift Resistance''': Panel securement shall conform to the requirements in [https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#PART_3 Part 3] of the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].
<li>'''Materials''':RoofStar (RGC) accepted metal panel systems shall be formed of steel conforming to the requirements published in [https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#Section_9.2._Materials Section 9.2.] of the Standard.
</li></ol>

<hr>


[[Architectural Metal Roofing|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Site-Formed Metal Roofing Systems'']]

[[Materials by Product Type|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Accepted Materials'']]


[[Main Page|Home]]