View source for Materials:(Transwest) SS 100

__NOTOC__
__NONUMBEREDHEADINGS__
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}

<big><big>Division C - Accepted Materials</big></big>
<hr>
<big><big><big><big><big>SS 100</big></big></big></big></big><br>
<big><big><big>by Transwest Roofing Ltd.</big></big></big><br>
{| class="wikitable"
|-
| style="background-color: #ffffcc; column-width:100%" | The metal panel listed and described below is accepted for use in the '''''RoofStar Guarantee Program'''''.
|}
{| class="wikitable"
|-
| 
;'''Manufacturer''': Transwest Roofing Ltd.
;'''Contact Address''': See the current Membership list and contact information at [http://www.rcabc.org/members/find-a-member/ www.rcabc.org]
;'''Product Group - Standing Seam Metal Roof System'''
;'''Panel Machine''': New Tech Machinery
;'''Panel Name''': (Transwest) SS 100
;'''Seam Type''': Mechanical Lock: 25 mm (1")

The roofing assembly / material information published below and in the [http://{{SERVERNAME}}/index.php?title=Main_Page RCABC Roofing Practices Manual] DOES NOT represent a complete set of the manufacturer's published data, nor does it represent a detailed specification. The preparation of a detailed specification is the responsibility of the design authority.  For more information about this product or system, consult the manufacturer.
|}

====OVERVIEW====
The New Tech Machinery Panel Machine is an on-site continuous metal roofing panel roll forming machine.  This machine produces Seam Lock - SS 100 with a seam height of 22 mm (1").  Panel profiles vary from 300 mm (12") to 500 mm (20") wide.

On-site roll forming provides for the elimination of end laps with continuous panel forming capabilities in lengths up to nominal 46m (150').

====SYSTEM DESCRIPTION====
#'''General''':  Standing seam panels use a hidden fastening clip system for mechanical fastening to a solid substrate. The maximum spacing of the clips is 600 mm (24") on centre. The panels are locked together, with the clips as part of the seam, by use of a mechanical seamer.
#'''Range of application''': on wood or metal sloped roofs; in commercial, institutional, industrial and residential construction; for re-roofing or new construction. 
#'''Fasteners (Screws)''': 
##Fasteners used to attach panel clips to plywood to be No. 10-12 by 25 mm (1") long pancake head, No. 2 Phillips drive, A-point, coated steel screw.  Minimum two fasteners per clip to be used.
#'''Clips''':
##One piece assembly 43.75 mm (1-3/4") wide, 31 mm (1-1/4") high.  Minimum thickness 0.022 in.(No. 22 MSG).  Clips spaced 600 mm (24") on centre fastened to plywood deck.  Englert "Series 1000 Interlocking Clip".
#'''Deck Requirements''': in keeping with the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].

====PROFILE====
N/A
====TECHNICAL DATA SHEET====
N/A

====SITE CONDITIONS====
#Minimum roof slope is 1:4 (3" in 12"). Severe conditions (heavy snow or ice) minimum slope is 1:1.5 (8" in 12").

====PERFORMANCE REQUIREMENTS====
<ol>
<li>'''Wind Uplift Resistance''': Panel securement shall conform to the requirements in [https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#PART_3 Part 3] of the [http://rpm.rcabc.org/index.php?title=Standard_for_Architectural_Sheet_Metal_(ASM)_Systems Standard for Architectural Sheet Metal (ASM) Systems].
<li>'''Materials''':RoofStar (RGC) accepted metal panel systems shall be formed of steel conforming to the requirements published in [https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard#Section_9.2._Materials Section 9.2.] of the Standard.
</li></ol>

<hr>


[[Architectural Metal Roofing|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Site-Formed Metal Roofing Systems'']]

[[Materials by Product Type|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Accepted Materials'']]


[[Main Page|Home]]