View source for SBS Parapet-Wall Connection

{{Template:RPM Info}}

{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
__NOTOC__

<big><big>Division D - Construction Details</big></big>
<hr>
<big><big><big><big><big>SBS | Parapet-Wall Connection ([[SBS_Roof_Systems_Standard#10.3.4.1._Parapets | Article 10.3.4.1.]])</big></big></big></big></big>
{{Template:Construction Details Header}}
<div class="panel panel-success">
<div class="panel-heading"><big>'''SBS Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<div style="text-align:center; vertical-align:center">
[[File:10.3.1.4.jpg|class=img-responsive]]
</div>

</div><!-- COL-MD-6 -->

<div class="col-md-6">
=== WORK INCLUDED ===

;(1) [[SBS Roof Systems Standard#PART_5|'''Supporting Deck Overlay''']]: If required by design authority.
;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]:If required by design authority.
;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]:
:See list of '''[[Division C: Accepted Materials|Accepted Materials]]'''.
;(4) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]:
:As required.
;(5) [[SBS Roof Systems Standard#PART_9|'''Primary Membrane''']] and [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSPROTECTION| '''Membrane Protection''']]:
;(6) [[SBS Roof Systems Standard#PART_10|'''Membrane Flashing (attachment & termination)''']]: Mechanically fasten at terminations.  At least one ply must extend over outside edge.
;(7) [[SBS Roof Systems Standard#PART_13|'''Metal Base Flashing''']]: Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats.
;(8) [[SBS Roof Systems Standard#PART_13|'''Metal Cap Flashing''']]: Must overlap exterior wall finish.  Fasten with  concealed clip-type fasteners  <b>or</b> cladding screws evenly spaced between seams.
;(9) [[SBS Roof Systems Standard#PART_10|'''Wall Tie-in''']]: Minimum 2 mm (0.078") self-adhered  modified bitumen or flexible membrane manufacturers approved detail.
;(10)[[SBS Roof Systems Standard#PART_13|'''Metal Counter-flashing''']]:

<hr>

=== RELATED WORK BY OTHERS ===

;(A) [[SBS Roof Systems Standard#PART_2|'''Acceptable Supporting Deck Structure''']]
;(B) [[SBS Roof Systems Standard#PART_6|'''Air and Vapour Control Layer Seal''']]
;(C) [[SBS Roof Systems Standard#PART_2|'''Acceptable Wall Surface''']]
;(D) [[SBS Roof Systems Standard#PART_10|'''Wood Blocking''']] 
;(E) [[SBS Roof Systems Standard#PART_10|'''Sloped Wood Blocking''']]
:Required over 100 mm (4") parapet width.
;(F) [[SBS Roof Systems Standard#PART_10|'''Wall Sheathing Membrane''']]: Minimum 1 mm (0.040") self-adhered modified bitumen.
;(G) <b>Wall Cladding</b>
</div><!-- COL-6-MD -->
</div><!-- PANEL BODY -->
</div><!-- PANEL -->

'''NOTE''': See the [[SBS Roof Systems Standard | '''Standard''']] for additional requirements.

<hr>

[[SBS Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''"SBS" Roof System Details'']]

[[Main Page | <i class="fa fa-home fa"></i> Home]]

{{Tempate:RPM Page Footer with Copyright and Current Date}}