View source for TPO Membrane Termination C

{{Template:RPM Info}}



{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
__NOTOC__

<big><big>Division D - Construction Details</big></big>
<hr>
<big><big><big><big><big>TPO | Membrane Termination C (Wall) ([[TPO_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])</big></big></big></big></big>
{{Template:Construction Details Header}}
<div class="panel panel-success">
<div class="panel-heading"><big>'''TPO Details'''</big></div>
<div class="panel-body">
<div class="col-md-6">
<div style="text-align:center; vertical-align:center">
<br>
[[File:10.3.2.3.-TPO-C.png|class=img-responsive | link=https://rpm.rcabc.org/images/8/8f/10.3.2.3.-TPO-C.png]]
:Drawing NTS
</div>
</div><!-- COL-6-MD -->

<div class="col-md-6">
=== WORK INCLUDED ===

;(1) [[TPO Roof Systems Standard#PART_6|<big>Air/Vapour Control Layers</big>]]: 
:As specified by the ''Design Authority'' and installed to provide continuity for optimal control.
;(2) [[TPO Roof Systems Standard#PART_7|<big>Insulation</big>]]:
:Installed in keeping with Section 7.3.  Multiple layering illustrated; layers must be offset and staggered at least 304.8 mm (12”) in each direction.
;(3) [[TPO Roof Systems Standard#PART_8|<big>Insulation Overlay Panel</big>]]:
:Required for fully adhered membrane systems or when overburden is specified.  Panels must be offset and staggered from underlying insulation panels.
;(4) [[TPO Roof Systems Standard#PART_9|<big>Field Membrane</big>]]:
:See Table 9.2. for permissible application methods and corresponding membrane properties.  Membrane must be installed according to the requirements in Section 9.3.
;(5) [[TPO Roof Systems Standard#PART_10|<big>Edge Securement</big>]]:
:Proprietary to the membrane manufacturer.  Edge securement is required, irrespective of how the membrane is applied (i.e., adhered, self-adhered, mechanically fastened).
;(6) [[TPO Roof Systems Standard#PART_10|<big>Mechanical Fastening</big>]]:
:Edge securement must be anchored to the roof structure to prevent membrane movement.
;(7) [[TPO Roof Systems Standard#PART_10|<big>Primer or Adhesive</big>]]:
:Proprietary to the membrane manufacturer.  Primer may be required for self-adhered membranes; adhesive is required for all other applications.  All membranes applied to the vertical substrate must be fully adhered.
;(8) [[TPO Roof Systems Standard#PART_10|<big>Membrane Flashing</big>]]:
:May be run continuously up the vertical substrate from the field or installed as separate flashing (see membrane manufacturer requirements).  Membrane shall be carried up the vertical substrate at least 203.2 mm (8”) above the ''finished roof system surface'', plus at least 76.2 mm (3”) for wall control layer overlap. In regions where heavy snow accumulation is possible, or to accommodate future roof membrane replacement, membrane should be carried at least 304.8 mm (12”) up the vertical substrate.
;(9) [[TPO Roof Systems Standard#PART_10|<big>Membrane Edge Securement and Sealant</big>]]:
:All membranes applied to a vertical surface must be mechanically fastened.  2-component fleece-reinforced PMMA/PUMA is illustrated, together with sealant applied to upper membrane edge (See [[PVC Roof Systems Standard#10.3.3.4. Liquid Membrane Flashing | Article 10.3.3.4.]] for application requirements); liquid membrane flashing must be compatible with the primary membrane and listed in [https://rpm.rcabc.org/index.php?title=Division_C Division C] of the RPM.

=== RELATED WORK BY OTHERS ===
;(A) [[TPO Roof Systems Standard#PART_2|<big>Acceptable Deck</big>]]
:Illustrated deck is representative.  See Sub-section 2.1.5. for acceptable ''deck'' types and conditions.
;(B) [[TPO Roof Systems Standard#PART_2|<big>Wall Structure</big>]]
:Illustrated wall is representative.  Wall control layers (i.e. water resistive barrier) must overlap ''roofing system'' to achieve ''continuity''.  See Sub-section 2.1.7. for wall conditions.

</div><!-- COL-6-MD -->
</div><!-- PANEL BODY -->
</div><!-- PANEL -->

'''NOTE''': See the [[TPO Roof Systems Standard | '''TPO Roof Systems Standard''']] for additional requirements.

<hr>

[[TPO Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''TPO Roof System Details'']]

[[Main Page | <i class="fa fa-home fa"></i> Home]]

{{Template:RPM Page Footer with Copyright and Current Date}}