View source for Template:CSA A123.21 Wind Uplift Test Reports - AARS

<div class="row">

   <div class="col-md-2" style="float:right;" id="tocDiv">
      __TOC__
   </div> <!-- tocDiv -->

  <div class="col-md-10" id="mainBodyDiv">

{| class="wikitable"
|-
| style="background-color: #ffffcc; column-width:100%" | {{Template:Using CSA A123.21-Page Header}}
|}

===[[RoofStar Guarantee Standards for SBS Modified Bitumen Membrane Systems#SBSMEMBRANES |SBS Membrane Systems]]===
<tabs>
<tab name="How to use Tested Assembly Reports">
#The tables on the adjacent tabs display data and links to '''Tested Assembly Reports''' listed by the membrane type shown on the tab.  These are reports that detail the makeup and performance of roof systems tested using the ''CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane-roofing systems''  (latest edition).  Use the <u>maximum wind uplift values that equal or exceed</u> the highest Specified Wind Loads; these are calculated using either the online Wind-RCI calculator or through manual engineering calculations (see the ''British Columbia Building Code, Division B, Part 4'' ('''4.1.7 Specified Wind Loads'''));<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
#Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the manufacturer of the Tested Assembly for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.
</tab>
<tab name="SBS Base Membranes">
{{Template:AARS Membrane - SBS 2-Ply Base}}
</tab>
<tab name="SBS Cap Membranes">
{{Template:AARS Membrane - SBS 2-Ply Cap}}
</tab>
</tabs>

===[[RoofStar Guarantee Standards for EPDM Membrane Systems#EPDMMEMBRANES| EPDM Membrane Systems]]===
<tabs>
<tab name="How to use Tested Assembly Reports">
#The tables on the adjacent tabs display data and links to '''Tested Assembly Reports''' listed by the membrane type shown on the tab.  These are reports that detail the makeup and performance of roof systems tested using the ''CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane-roofing systems''  (latest edition).  Use the <u>maximum wind uplift values that equal or exceed</u> the highest Specified Wind Loads; these are calculated using either the online Wind-RCI calculator or through manual engineering calculations (see the ''British Columbia Building Code, Division B, Part 4'' ('''4.1.7 Specified Wind Loads'''));<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
#Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the manufacturer of the Tested Assembly for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.
</tab>
<tab name="EPDM/Elastomeric Membranes">
{{Template:AARS Membrane - EPDM}}
</tab>
</tabs>

===[[RoofStar Guarantee Standards for TPO Membrane Systems#TPOMEMBRANES | TPO Membrane Systems]]===
<tabs>
<tab name="How to use Tested Assembly Reports">
#The tables on the adjacent tabs display data and links to '''Tested Assembly Reports''' listed by the membrane type shown on the tab.  These are reports that detail the makeup and performance of roof systems tested using the ''CSA-A123.21 Standard test method for the dynamic wind uplift resistance of membrane-roofing systems''  (latest edition).  Use the <u>maximum wind uplift values that equal or exceed</u> the highest Specified Wind Loads; these are calculated using either the online Wind-RCI calculator or through manual engineering calculations (see the ''British Columbia Building Code, Division B, Part 4'' ('''4.1.7 Specified Wind Loads'''));<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
#Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the manufacturer of the Tested Assembly for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.
</tab>
<tab name="TPO Membranes">
{{Template:AARS Membrane - TPO}}
</tab>
</tabs>

===[[RoofStar Guarantee Standards for PVC Membrane Systems#PVCMEMBRANES | PVC Membrane Systems]]===
Under development

</div><!-- mainBodyDiv -->
</div><!-- row -->
<div style="text-align:center">
</div>