View source for Template:Materials - Eave Protection & Underlayment (ASM)

'''Eave protection''' is used to protect the eave and valley areas of water-shedding roofs from ice dam damage. An ice dam usually forms when the interior heat of the building warms the snow on the roof, causing it to melt and run down to the eaves. Normally, eaves extend past the exterior face of the building and are not heated from the inside. This allows the water to freeze and form an ice dam. As the ice dam grows, it forms a barrier that prevents water from draining off the edge of the eaves. The water backs up behind the dam and gradually forces its way under the primary roof covering (asphalt shingles, metal panels, cedar shakes or shingles, etc.), where it warms and melts (the result of heat leakage through discontinuities in the air barrier system).  Liquid water then leaks through the roof deck and into the structure. The results can range from minor staining to severe water damage to the structural members.

Eave protection membranes are designed to prevent the water from reaching the deck and leaking into the structure. These materials are self-adhering and manufactured with a rubberized asphaltic compound, or with butyl. Properly formulated and installed, these sheets have the potential to perform a long time. Slope and climate conditions are considerations for selection; refer to the Standard for further information and guidance.

'''Underlayment''' is used in the field areas of the roof (where eave protection is not required) to provide a secondary protection beneath the roof covering, during weather events that might force water underneath.
<hr>
<big><u>'''Notice to Reader'''</u></big></span><br>
<span style="color:#FF0000"><big><big>*</big></big></span> '''Eave and Valley Protection''' - Some of the materials listed in the columns for eave or valley protection must be installed in multiple layers because, by themselves, they are too thin to satisfy the material requirements published in the [https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard Standard for Architectural Sheet Metal (ASM) Roof Systems].  Consult the product manufacturer for appropriate application requirements, and the Standard for multiple layering requirements.  If multi-layering is not permitted by the manufacturer, select a product with suitable thickness that may be applied in a single layer.<br>
<span style="color:#FF0000"><big><sup>†</sup></big></span> '''Underlayment''' - While some materials listed as underlayments are nail-applied, their acceptability is dependent on roof slope.  Refer to Part 8 in the [https://rpm.rcabc.org/index.php?title=ASM_Roof_Systems_Standard Standard for Architectural Sheet Metal (ASM) Roof Systems] before specifying or installing nail-applied materials; nail-applied underlayments are not permitted on slopes less than 1:3 (4" in 12").

{|	class="wikitable sortable mw-datatable" style="margin-left: 2pt; margin-right: auto; border: none;"																																											
!	style="width:275px; vertical-align:top;"	|	Manufacturer																					
!	style="width:275px; vertical-align:top;"	|	Product Name																					
!	style="width:275px; vertical-align:top;"	|	Product Type																					
!	style="width:175px; vertical-align:top;"	|	Top Surface																					
!	class="unsortable" style="width:100px; vertical-align:top;"	|	Separation<br>Layer																					
!	class="unsortable" style="width:100px; vertical-align:top;"	|	Eaves &<br>Valleys<span style="color:#FF0000"><big>*</big></span>																					
!	class="unsortable" style="width:100px; vertical-align:top;"	|	Under-<br>layment<span style="color:#FF0000"><big><sup>†</sup></big></span>																				
!	class="unsortable" style="width:100px; vertical-align:top;"	|	Nominal Thickness<br>mm (mil)																					
!	class="unsortable" style="width:200px; vertical-align:top;"	|	Application Method																					
|-																								
|}																								
	<div style="max-height: 450px; overflow-y: scroll">																							
{|	class="wikitable sortable  mw-datatable" style="margin-left: 2pt; margin-right: auto; border: none;"																							
!	style="width:275px;text-align:center; background-color:#C0C0C0"	|	<small>Click up/down arrows to sort</small>																					
!	style="width:275px;text-align:center; background-color:#C0C0C0"	|																						
!	style="width:275px;text-align:center; background-color:#C0C0C0"	|																						
!	style="width:175px;text-align:center; background-color:#C0C0C0"	|																						
!	style="width:100px;text-align:center; background-color:#C0C0C0"	|																						
!	style="width:100px;text-align:center; background-color:#C0C0C0"	|																						
!	style="width:100px;text-align:center; background-color:#C0C0C0"	|																						
!	style="width:100px;text-align:center; background-color:#C0C0C0"	|																						
!	style="width:200px;text-align:center; background-color:#C0C0C0"	|																						
|-																								
||	Various	||	No. 30 Asphalt Felt	||	style="text-align:center;"|	Felt underlayment	||	style="text-align:center;"|	Non-woven Felt	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Building Products of Canada Corp.]]'''	||	[[Materials:Gripgard|Gripgard]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Building Products of Canada Corp.]]'''	||	[[Materials:Weathertex (SA) | {{hilite | Weathertex (SA) || 2022-October-17 }}]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.5 (60)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]'''	||	[[Materials:DiamondDeck|DiamondDeck]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Synthetic Polymer	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	N/A	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]'''	||	[[Materials:RoofRunner AIR | {{hilite | RoofRunner AIR || 2024-June-15 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Synthetic Polymer	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.56 (22)	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:CertainTeed LLC | CertainTeed LLC]]'''	||	[[Materials:WinterGuard Pro | {{hilite | WinterGuard Pro || 2025-June-13 }}]]	||	style="text-align:center;"|	SBS Modified Bituminous	||	style="text-align:center;"|	Synthetic Polymer	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.14 (45)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Elevate | Elevate (fomerly Firestone)]]'''	||	[[Materials:Clad-Gard SA |Clad-Gard SA ]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Woven Polyethylene	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.00 (40)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Elevate | Elevate (fomerly Firestone)]]'''	||	[[Materials:Clad-Gard MA |Clad-Gard MA ]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	N/A	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:FT Synthetics | FT Synthetics]]'''	||	[[Materials:PLATINUM (FT Synthetics) |PLATINUM]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Polyolefin	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.50 (20)	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:FT Synthetics | FT Synthetics]]'''	||	[[Materials:SILVER (FT Synthetics) |SILVER]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Polyolefin	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.30 (12)	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:FT Synthetics | FT Synthetics]]'''	||	[[Materials:PLATINUM HT-SA (FT Synthetics) |PLATINUM HT-SA]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	GRIPSPOT TM	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.04 (41)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:FT Synthetics | FT Synthetics]]'''	||	[[Materials:Platinum HT-B (FT Synthetics) |{{hilite | Platinum HT-B || 2023-January-20 }} ]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	GRIPSPOT TM	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span><span style="color:#FF0000"><big>*</big></span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.04 (41)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:FT Synthetics | FT Synthetics]]'''	||	[[Materials:Cobalt Ultra (FT Synthetics) |Cobalt Ultra]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	GRIPSPOT TM	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.04 (41)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:GAF Canada ULC | GAF Canada ULC]]'''	||	[[Materials:Stormguard|Stormguard]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.02 (40)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:GAF Canada ULC | GAF Canada ULC]]'''	||	[[Materials:Deck Armor|{{hilite | Deck Armor || 2022-June-17 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:GAF Canada ULC | GAF Canada ULC]]'''	||	[[Materials:FeltBuster|{{hilite | FeltBuster || 2022-June-17 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	non-slip	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Garland Canada Inc. | Garland Canada Inc.]]'''	||	[[Materials:R-Mer Seal|R-Mer Seal]]	||	style="text-align:center;"|	polymer/rubberized asphalt adhesive	||	style="text-align:center;"|	Slip-resist. Polymer	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.14 (45)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Garland Canada Inc. | Garland Canada Inc.]]'''	||	[[Materials:Viking UDL Metal | Viking UDL Metal]]	||	style="text-align:center;"|	polymer/rubberized asphalt adhesive	||	style="text-align:center;"|	Polyester	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.52 (60)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:HAL Industries Inc. | HAL Industries Inc.]]'''	||	[[Materials:“Super” Tilemate G100 FW|“Super” Tilemate G100 FW]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Woven Polypropylene	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.00 (40)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Henry Company Canada | Henry Company Canada]]'''	||	[[Materials:Blueskin PE 200 HT|Blueskin PE 200 HT]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Polyethylene	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.00 (40)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Henry Company Canada | Henry Company Canada]]'''	||	[[Materials:Blueskin RF 200|Blueskin RF 200]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Slip-resistant Film	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.00 (40)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Henry Company Canada | Henry Company Canada]]'''	||	[[Materials:Eaveguard|Eaveguard]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.30 (50)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:IKO Industries Ltd. | IKO Industries Ltd.]]'''	||	[[Materials: Stormshield Ice and Water Protector (IKO) | {{hilite | Stormshield Ice and Water Protector|| 2022-February-5 }}]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.08 (43)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:IKO Industries Ltd. | IKO Industries Ltd.]]'''	||	[[Materials: 44 Stormshield Ice and Water Protector (IKO)| {{hilite | 44 Stormshield Ice and Water Protector || 2022-February-5 }}]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.08 (43)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:IKO Industries Ltd. | IKO Industries Ltd.]]'''	||	[[Materials: Armourgard Ice and Water Protector (IKO)| {{hilite | Armourgard Ice and Water Protector || 2022-February-5 }} ]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.4 (53)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:KPNE Products Ltd. | {{hilite | KPNE Products Ltd. || 2025-June-13 }}]]'''	||	[[Materials:ULTRASeal SA HT | {{hilite | ULTRASeal SA HT || 2025-June-13 }}]]	||	style="text-align:center;"|	Polymeric/Self-adhering butyl	||	style="text-align:center;"|	Slip-resist. polymer	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.14 (45)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]'''	||	[[Materials:Right Start™ UDL |Right Start™ UDL ]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.40 (55)	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]'''	||	[[Materials:Arctic Seal Ice & Water Guard |Arctic Seal Ice & Water Guard]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.52 (60)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]'''	||	[[Materials:Secure Start Plus | {{hilite | Secure Start Plus || 2022-June-17 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Slip-resist. polymer	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]'''	||	[[Materials:Secure Start SG | {{hilite | Secure Start SG || 2022-June-17 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Smooth polymeric	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Malarkey Roofing Products | Malarkey Roofing Products]]'''	||	[[Materials:Secure Start Permeable | {{hilite | Secure Start Permeable || 2022-June-17 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]'''	||	[[Materials:Titanium UDL 25|Titanium UDL 25]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Synthetic (not stated)	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.38 (15)	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]'''	||	[[Materials:Titanium UDL 30|Titanium UDL 30]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Synthetic (not stated)	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.63 (25)	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]'''	||	[[Materials:Titanium UDL 50|Titanium UDL 50]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Synthetic (not stated)	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.75 (30)	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]'''	||	[[Materials:Titanium PSU 30 |Titanium PSU 30]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Synthetic Polymer	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.10 (45)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Owens Corning Canada LP | Owens Corning Canada LP]]'''	||	[[Materials:RhinoRoof U20 |RhinoRoof U20]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Not Stated	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.18 (7)	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Polyglass USA, Inc. | Polyglass USA, Inc.]]'''	||	[[Materials:Polystick MTS|Polystick MTS]]	||	style="text-align:center;"|	Proprietary Compound	||	style="text-align:center;"|	Fibreglass mat	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.50 (60)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Protecto Wrap Company | Protecto Wrap Company]]'''	||	[[Materials:Jiffy Seal Ice and Water Guard HT|Jiffy Seal Ice and Water Guard HT]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Woven polyolefin	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.00 (40)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Protecto Wrap Company | Protecto Wrap Company]]'''	||	[[Materials:Jiffy Seal Butyl Ice and Water Guard HT|Jiffy Seal Butyl Ice and Water Guard HT]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Woven polyolefin	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.75 (30)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]'''	||	[[Materials:Roofnado AnchorDeck (Sentry) |{{hilite | Roofnado AnchorDeck|| 2022-February-5 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Not Stated	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]'''	||	[[Materials:Roofnado LapLock PSU (HT) (Sentry) | {{hilite | Roofnado LapLock PSU (HT)|| 2022-February-5 }}]]	||	style="text-align:center;"|	Polymeric/Self-adhered underside	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]'''	||	[[Materials:StormTread XW (Sentry) | {{hilite | StormTread XW|| 2022-February-5 }} ]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Not Stated	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]'''	||	[[Materials:Sahara | {{hilite | Sahara (underlayment) || 2024-October-20 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Not Stated	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Sentry Building Innovations | Sentry Building Innovations]]'''	||	[[Materials:Sahara AnchorDeck | {{hilite | Sahara AnchorDeck (underlayment) || 2024-October-20 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Not Stated	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	‒	||	style="text-align:center;"|	Nail-applied
|-																								
||	'''[[Manufacturers:Siplast|Siplast]]'''	||	[[Materials:Paradiene 20 EG SA |{{hilite | Paradiene 20 EG SA|| 2021-October-30 }}]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Not Stated	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	3.00 (118)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Soprema Inc. | Soprema Inc.]]'''	||	[[Materials:Lastobond 195 |Lastobond 195]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.60 (63)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Soprema Inc. | Soprema Inc.]]'''	||	[[Materials:Lastobond 240|Lastobond 240]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.60 (63)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Soprema Inc. | Soprema Inc.]]'''	||	[[Materials:Lastobond Shield|Lastobond Shield]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Woven polyethylene	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.00 (40)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Soprema Inc. | Soprema Inc.]]'''	||	[[Materials:Lastobond Shield HT|Lastobond Shield HT]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Woven polyethylene	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.00 (40)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Soprema Inc. | Soprema Inc.]]'''	||	[[Materials:Sopraseal Stick 1100 T|Sopraseal Stick 1100 T]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Woven polyethylene	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	1.00 (40)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Soprema Inc. | Soprema Inc.]]'''	||	[[Materials:Sopraply Stick Duo|Sopraply Stick Duo]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Sanded	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	3.00 (120)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:Soprema Inc. | Soprema Inc.]]'''	||	[[Materials:Lastobond Stick VP (Soprema) | Lastobond Stick VP]]	||	style="text-align:center;"|	SBS-modified Bituminous	||	style="text-align:center;"|	Trilaminar polypropylene	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.6 (24)	||	style="text-align:center;"|	Self-adhering
|-																								
||	'''[[Manufacturers:VaproShield_LLC | VaproShield LLC]]'''	||	[[Materials:SlopeShield Plus Self-Adhered | {{hilite | SlopeShield Plus Self-Adhered || 2025-January-31 }}]]	||	style="text-align:center;"|	Polymeric	||	style="text-align:center;"|	Trilaminar polypropylene	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	<span style="color:#d33">'''X'''</span>	||	style="text-align:center;"|	<span style="color:#228B22"> &#10004;</span>	||	style="text-align:center;"|	0.51 (20)	||	style="text-align:center;"|	Self-adhering
|-																								
|}