Manufacturers:Elevate

Division C - Accepted Materials

---

Elevate Commercial Roofing Systems (formerly Firestone Building Products)
Associate Member (Manufacturer)

Materials Listed by Category The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website https://www.holcimbe.com/en Contact Address See the current Membership list and contact information at www.rcabc.org Country of Origin U.S.A. and Canada Country of Manufacture Year First Installed BC: Canada: Foreign:

Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes Bituminous roofing membranes are governed by RGC Acceptance Criteria RGC ACWP-MOD (applicable to membranes accepted after July 1, 2023). The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015. The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024). Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website.

Waterproofing Roofs

---

Insulation

Polyisocyanurate Foam

Elevate ISOGARD CG

Insulation Overlay Panels

High-density Insulation Overlays

Elevate ISOGard HD Cover Board

Felts (BUR)

Glass-fibre Felts

Ply IV (BUR)

Ply VI (BUR)

SBS Polymer-Modified Bituminous Membranes

(See the membrane tables in Division C)

Waterproofing Roofs

---

EPDM Membranes

(See the membrane tables in Division C)

Reinforced

Elevate RubberGard MAX (Reinforced) EPDM Membrane

Elevate RubberGard MAX PT (Reinforced) EPDM Membrane

Unreinforced

RubberGard EcoWhite EPDM

Rubbergard EPDM : Under review by the RGC.

Elevate RubberGard EPDM SA Membrane

TPO Membranes

(See the membrane tables in Division C)

Ultraply TPO

UltraPly XR TPO

UltraPly TPO SA

Liquid Membrane Flashing Systems

(See the membrane tables in Division C)

Two-part Reinforced Liquid Membrane Flashing

Ultraflash

Waterproofing at Grade

---

Liquid Membrane Flashing Systems

(See the membrane tables in Division C)

Ultraflash

Water-shedding Roofs

---

Eave Protection & Underlayment (ASM)

Self-adhered Materials

CLAD-GARD SA Metal Underlayment

CLAD-GARD MA Metal Underlayment

Metal Roofing

Una-Clad UC Metal Roof Panel Systems

---

Home

© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Accept Terms Of Use

We use cookies to enhance your browsing experience and analyze website traffic. By clicking "Agree" or continuing to browse our website, you consent to the use of cookies and agree to the Roofing Practices Manual Terms Of Use.

Agree