Difference between revisions of "SBS Metal Edge Termination"

Revision as of 18:17, 1 December 2016

RoofStar Guarantee Standards are blue-linked

SBS Details

Click below for a printable version of this page.

(1) Vapour Retarder: If required by design authority
(2) Insulation: See available insulation products in the Accepted Materials section of this Manual.
(3) Insulation Overlay Board: Where required.
(4) Primary Membrane and Membrane Protection: Mechanically fasten to outside face of fascia (C).
(5) Mastic: Trowel coating of compatible mastic.
(6) Metal Edge/Gravel-stop Flashing: Minimum 100 mm (4") flange onto roof membrane, eave stop maximum 25 mm (1") high: embed in mastic and mechanically fasten alternately between centre and edge of flange at 100 mm (4") o/c; lap flashing 100 mm (4") minimum.
(7) Membrane Flashing: Asphalt and gravel roofing systems, 2 overlapping plies of a minimum 2 mm reinforced SBS modified bitumen base sheet. For flexible membrane systems, refer to manufacturer’s application details and RoofStar Guarantee Standards.
(8) Asphalt: For asphalt and gravel built-up roofing systems only.
(9) Gravel: For asphalt and gravel built-up roofing systems only.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

@@ Line 8: / Line 8: @@
 <div style="text-align:center; vertical-align:center">
 [[File:10.3.2.2.jpg|class=img-responsive]]
+</div>
+::Click below for a printable version of this page.
+<div style="width:150px; text-align: left;">
+:[[File:Pdf.png|100 px|link=http://rpm.rcabc.org/images/7/70/D1.7.3-2_SBS_Details_-_Edges_%26_Fascia_%28Gravel_Stop%29.pdf]]
 </div>
 </div><!-- COL-MD-6 -->