SBS Equipment Sleeper

RoofStar Guarantee Standards are blue-linked

SBS Details

1 WORK INCLUDED

(1) Gypsum Deck Overlay

If required by design authority.

(2) Vapour Retarder

If required by design authority.

(3) Insulation

See available insulation products in the Accepted Materials section of this Manual.

(4) Insulation Overlay Board

As required.

(5) Primary Membrane and Membrane Protection

(6) Membrane Flashing

Lap one ply from each side over top of sleeper (C) and mechanically fasten.

(7) Alternate Cap Flashing

May be used instead of lapping membrane flashing over sleeper.

(8) Metal Base Flashing

Mechanically fasten to top of wood blocking, standing seam at corners, optional on flexible membrane systems. Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats.

(9) Metal Cap Flashing

NOTE: (8) and (9) may be one piece.

---

2 RELATED WORK BY OTHERS

(A) Acceptable Deck

(B) Air / Vapour Seal

(C) Wood Blocking/Sleeper

Minimum 150 mm (6") thick, minimum 100 mm (4") above finished roof surface.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

---

Back to RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies

Back to SBS Modified Bitumen Construction Details

Back to Construction Details