Difference between revisions of "SBS Parapet (Independent of Roof Structure)"

Revision as of 18:15, 29 January 2019

RoofStar Guarantee Standards are blue-linked

SBS Details

Click below for a printable version of this page.

(1) Deck Overlay
(2) Air and Vapour Control Layers: If required by design authority.
(3) Insulation
(4) Insulation Overlay: As required.
(5) Primary Membrane and Membrane Protection
(6) Membrane Flashing: Mechanically fasten to outside face of parapet blocking (F). Do not mop outside edge. At least one ply must extend over outside edge.
(7) Metal Base Flashing: Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats. See Section 13.6 - Cap Flashings, Base Flashings and Reglets.
(8) Metal Cap Flashing: Flashings 7 and 8 may be one piece. See Section 14. Fasten with continuous concealed clip-type fasteners or cladding screws evenly spaced between seams. See Section 13.3 - Attachment.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

@@ Line 35: / Line 35: @@
 ;(A) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSDECKS|'''Acceptable Deck''']]
-;(B) '''Air and Vapour Control Layer Seal'''
+;(B) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSAIRVAPOUR|'''Air and Vapour Control Layer Seal''']]
 ;(C) [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSWALLSUB|'''Acceptable Wall Surface''']]
 ;(D) '''Wood Blocking'''