Difference between revisions of "ASM Valley (Hooked)"

Revision as of 21:15, 24 April 2019

RoofStar Guarantee Standards are blue-linked

ASM Details

File:ASM 10.11.jpg

Click below for a printable version of this page.

(1) Architectural Metal Roof Panel
(2) Valley Panel Overlap: Set in two continuous rows of accepted caulking or sealant tape.
(3) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
(4) Underlayment: The type of underlay required is determined by roof slope.
(5) Membrane Strip-in: Accepted self-adhered modified bituminous eave protection membrane.
(6) Continuous Built-In Hook Strip
(7) Fastening: Metal valley panels to be secured with compatible, non-corrosive, flat head fasteners 200 mm (8") o/c. Metal roof panel to metal valley panel overlap must be a minimum of 125 mm (5").
(8) Valley Protection Membrane: Accepted self-adhered modified bituminous eave protection membrane.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Revision as of 21:15, 24 April 2019 (view source) James Klassen (talk \| contribs) ← Older edit	Revision as of 21:15, 24 April 2019 (view source) James Klassen (talk \| contribs) m (James Klassen moved page ASM Details:E1.7.5 (Metal Valley - Hooked Flashing) to ASM 10.11 Hooked Valley Flashing) Newer edit →
(No difference)