Asphalt Shingles - Application (Low Slopes)

RoofStar Guarantee Standards are blue-linked

Asphalt Shingle Details

Applicable to slopes 1:6 (2" in 12") and greater.

1 WORK INCLUDED

(1) Underlayment & Eave Protection

One ply of self-adhered modified bituminous underlayment material. Lap 50 mm (2") minimum on sides and 150 mm (6") minimum on ends. Also refer to the Accepted Materials section of this Manual.

(2) Edge Metal Flashing

Optional (cf. 2.2.9 Wood Deck Overlay Sheathing (Non-Structural) for specific requirements), installed to manufacturer's printed instructions.

(3) Starter Course

Consists of same type shingles used for roof, applied tabs facing up the slope.

(4) Strip or Standard Shingles

Applied as recommended by manufacturer. Laminated shingles are not acceptable for this application.

(5) Compatible Mastic

Heavy bead of compatible asphaltic mastic at rakes (gables) and valleys.

(6) Protrusions

Curbs and skylights must be flashed with underlayment so as to shed water, with minimum 125mm (5") up vertical surfaces and 150 mm (6") lapping onto field surfaces. Vent stack underlayment flashing should fit tight to the vent pipe and be sealed with compatible mastic. For fire-rated stacks or hot pipe protrusions, strip in secondary metal deck flashing before installing rated stack / pipe flashing.

(7) Nailing

Note manufacturer's recommended nailing pattern. Placement varies with manufacturer.

---

2 RELATED WORK BY OTHERS

(A) Acceptable Deck

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

---

RoofStar Guarantee Standards for Asphalt Shingle Systems

Back to Asphalt Shingles Construction Details

Back to Construction Details