Difference between revisions of "SBS 2-Part Retrofit Flashing (Cable Penetration)"

Revision as of 19:35, 5 December 2019

RoofStar Guarantee Standards are blue-linked

SBS Details

Click below for a printable version of this page.

(1) Supporting Deck Overlay: Required when insulation is too thin to span flutes of steel decking or as thermal barrier when specified by the design authority.
(2) Air or Vapour Control Layers: If required by design authority.
(3) Insulation: Mechanically fastened where possible. See available insulation products in the Accepted Materials section of this Manual.
(4) Insulation Overlay: As required.
(5) Field Base Membrane: Adhered to overlay board using asphalt, cold adhesive, self-adhered, mechanical attachment or torch applied according to manufacturer's specification and to RoofStar Guarantee Standards. Torching directly to wood surfaces is not permitted.
(6) Mastic: Compatible with membrane
(7) Base Membrane Flashing: Adhered according to manufacturer's specifications, using cold adhesive, self-adhered or torch applied. Must be carried up flashing and terminate under hood flange. Torching directly to wood surfaces is not permitted.
(8) Field Cap Membrane: Applied according to manufacturer's printed instructions and to RoofStar Guarantee Standards.

(A) Acceptable Supporting Deck Structure
(B) Wood Blocking
(C) Two-piece Flashing: Assembled around protrusion, laid in bed of compatible mastic on top of base sheet. Mechanically fasten two components together and fasten flange to wood blocking or deck.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Revision as of 18:01, 30 January 2019 (view source) James Klassen (talk \| contribs) (→‎WORK INCLUDED) ← Older edit	Revision as of 19:35, 5 December 2019 (view source) James Klassen (talk \| contribs) m (James Klassen moved page SBS Details:D1.7.7-2 Strip-in Flashings (Two-part Cable) to SBS 11.3.3.3-2 Penetration Flashings (two-part cable)) Newer edit →
(No difference)