Difference between revisions of "ASM Eave Protection and Underlayment"
Difference between revisions of "ASM Eave Protection and Underlayment"
(Created page with "File:8.1.4.1.1.jpg === WORK INCLUDED === ;(1) <b>Underlayment</b>: :Proprietary underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 1...") |
|||
| Line 1: | Line 1: | ||
[[File:8.1.4.1.1.jpg]] | [[File:8.1.4.1.1.jpg]] | ||
| + | |||
=== WORK INCLUDED === | === WORK INCLUDED === | ||
| Line 15: | Line 16: | ||
;* This specification is only applicable to slopes 1:3 (4" in 12") or greater | ;* This specification is only applicable to slopes 1:3 (4" in 12") or greater | ||
;* Slip sheet not shown for clarity | ;* Slip sheet not shown for clarity | ||
| + | |||
=== RELATED WORK BY OTHERS === | === RELATED WORK BY OTHERS === | ||
Revision as of 17:57, 21 December 2015
1 WORK INCLUDED
- (1) Underlayment
- Proprietary underlayment installed perpendicular to the slope with 50 mm (2") minimum side laps and 100 mm (4") minimum end laps.
- (2) Ice And Water Protection
- One ply of accepted self-adhered modified bituminous membrane.
- (3) Edge Metal Flashing
- Installed to manufacturer’s printed instructions.
- Note
- This specification is only applicable to slopes 1
- 3 (4" in 12") or greater
- Slip sheet not shown for clarity
2 RELATED WORK BY OTHERS
- (A) Acceptable Deck
- NOTE: * Refer to RGC Guarantee Standards for additional requirements.