Difference between revisions of "SBS Curb for Multiple Penetrations"

Latest revision as of 18:18, 27 October 2023

Division D - Construction Details

SBS | Curb for Multiple Penetrations ( Article 12.3.2.4.)

Notice to Reader
Images used in a Construction Detail are representative and not prescriptive, and are not necessarily drawn to scale. They are intended to support the related Standard (Ref. Division A, Article 2.2.1.2.). The reader may link to the related Article in the detail title, or link to the Standard as it relates to a specific element in the detail. All hyperlinks are displayed blue text.

SBS Details

1 WORK INCLUDED

(1) Supporting Deck Overlay: If required by design authority.
(2) Air or Vapour Control Layers: If required by design authority.
(3) Insulation: See available insulation products in the Accepted Materials Division of this Manual.
(4) Insulation Overlay: As required.
(5) Primary Membrane and Membrane Protection
(6) Membrane Flashing: Mechanically fasten to top of curb (C).
(7) Base Metal Flashing: Mechanically fasten to top of curb, standing seam at corners of cant, optional on flexible membrane systems. Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats.
(8) Metal Counter Flashing
(9) Metal Hood

2 RELATED WORK BY OTHERS

(A) Acceptable Supporting Deck Structure
(B) Air / Vapour Seal
(C) Curb: Minimum 200 mm (8") above finished roof surface.

NOTE: See the Standard for additional requirements.

Back to "SBS" Roof System Details

Home

© RCABC 2024
RoofStar^TM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

@@ Line 1: / Line 1: @@
-[[File:10.3.5.3.jpg]]
+{{Template:RPM Info}}
-=== WORK INCLUDED ===
+{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
-(1) <b>Gypsum Overlay Board: </b>If required by design authority.
+__NOTOC__
-(2) <b>Vapour Retarder</b>: If required by design authority.
+<big><big>Division D - Construction Details</big></big>
+<hr>
+<big><big><big><big><big>SBS | Curb for Multiple Penetrations ([[SBS_Roof_Systems_Standard#12.3.2.4._Curbs.2C_Sleepers.2C_and_Equipment_Pads | Article 12.3.2.4.]])</big></big></big></big></big>
+{{Template:Construction Details Header}}
+<div class="panel panel-success">
+<div class="panel-heading"><big>'''SBS Details'''</big></div>
+<div class="panel-body">
+<div class="col-md-6">
+<div style="text-align:center; vertical-align:center">
+[[File:10.3.5.3.jpg| link=http://rpm.rcabc.org/images/9/9f/10.3.5.3.jpg | class=img-responsive]]
+</div>
+</div><!-- COL-MD-6 -->
-(3) <b>Insulation</b>
+<div class="col-md-6">
+=== WORK INCLUDED ===
+;(1) [[SBS Roof Systems Standard#PART_5|'''Supporting Deck Overlay''']]: If required by design authority.
+;(2) [[SBS Roof Systems Standard#PART_6|'''Air or Vapour Control Layers''']]: If required by design authority.
+;(3) [[SBS Roof Systems Standard#PART_7|'''Insulation''']]: See available insulation products in the [[Division C| Accepted Materials]] Division of this ''Manual''.
+;(4) [[SBS Roof Systems Standard#PART_8|'''Insulation Overlay''']]: As required.
+;(5) [[SBS Roof Systems Standard#PART_9|'''Primary Membrane''']] and [[RoofStar Guarantee Standards for SBS Modified Bitumen Roof Assemblies#SBSPROTECTION| '''Membrane Protection''']]
+;(6) [[SBS Roof Systems Standard#PART_10|'''Membrane Flashing''']]:Mechanically fasten to top of curb (C).
+;(7) [[SBS Roof Systems Standard#PART_13|'''Base Metal Flashing''']]: Mechanically fasten to top of curb, standing seam at corners of cant, optional on flexible membrane systems.<b> </b>Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats.
+;(8) [[SBS Roof Systems Standard#PART_13|'''Metal Counter Flashing''']]
+;(9) '''Metal Hood'''
-(4) <b>Insulation Overlay</b>: Where required. See <i>RGC Guarantee Standard B4.1, B4.2 </i>and<i> C4.1</i>
+<hr>
-(5) <b>Primary Membrane and Membrane Protection</b>
-(6) <b>Membrane Flashing:</b> Mechanically fasten to top of curb (C).
-(7) <b>Metal Base Flashing:</b> Mechanically fasten to top of curb, standing seam at corners of cant, optional on flexible membrane systems.<b> </b>Optional on flexible membrane systems. Required on assemblies using gravel ballast filter mats. See <i>RGC Guarantee Standard A6.9</i>
-(8)<b> Metal Counter Flashing</b>
-(9) <b>Metal Hood</b>
 === RELATED WORK BY OTHERS ===
-(A) <b>Acceptable Deck</b>
+;(A) [[SBS Roof Systems Standard#PART_2|'''Acceptable Supporting Deck Structure''']]
+;(B) '''Air / Vapour Seal'''
-(B) <b>Air / Vapour Seal</b>
+;(C) [[SBS Roof Systems Standard#PART_11|'''Curb''']]: Minimum 200 mm (8") above finished roof surface.
+</div><!-- COL-6-MD -->
-(C) <b>Wood Blocking / Curb:</b> Minimum 200 mm (8") and maximum 300 mm (12") above finished roof surface.
+</div><!-- PANEL BODY -->
+</div><!-- PANEL -->
-'''NOTE''': Refer to <i>RGC Guarantee Standards</i> for additional requirements.
+'''NOTE''': See the [[SBS Roof Systems Standard | '''Standard''']] for additional requirements.
 <hr>
+[[SBS Roof System Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''"SBS" Roof System Details'']]
+[[Main Page | <i class="fa fa-home fa"></i> Home]]
+{{Tempate:RPM Page Footer with Copyright and Current Date}}
-[[Section:D. Application: Low Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''SBS Application'']]
-[[SBS Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''SBS Construction Details'']]
-[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Construction Details'']]

Difference between revisions of "SBS Curb for Multiple Penetrations"

Difference between revisions of "SBS Curb for Multiple Penetrations"

Latest revision as of 18:18, 27 October 2023

1 WORK INCLUDED

2 RELATED WORK BY OTHERS

3 Accept Terms Of Use