Difference between revisions of "EPDM Roof System Details"

Jump to: navigation, search

Difference between revisions of "EPDM Roof System Details"

(→‎Part 10 - Perimeters and Walls)
 
(37 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
The drawings contained within this section are intended to represent a variety of thermoset membrane roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and RGC.
+
{{Template:RPM Info}}
  
−
For further information about thermoset membrane (EPDM) system designs and requirements, see '''[[EPDM (Thermoset Membranes) Roof Systems]]'''.
+
__NONUMBEREDHEADINGS__
 +
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
 +
__NOTOC__
  
−
<div class="col-md-6">
+
:<big><big>Division D - Construction Details</big></big>
−
:[[EPDM Details:D2.7.1-1 Assemblies (Insulated Conventional)|D2.7.1-1 Assemblies (Insulated Conventional)]]
+
:<hr>
−
:[[EPDM Details:D2.7.1-2 Assemblies (Ballasted Protected Membrane)|D2.7.1-2 Assemblies (Ballasted Protected Membrane)]]
+
:<big><big><big><big><big>Construction Details for EPDM Membrane Roof Systems</big></big></big></big></big>
−
:[[EPDM Details:D2.7.1-3 Assemblies (Fully Adhered)|D2.7.1-3 Assemblies (Fully Adhered)]]
 
  
−
:[[EPDM Details:D2.7.2-1 Parapets & Copings (High - Wall Supported)|D2.7.2-1 Parapets & Copings (High - Wall Supported)'''(Under Construction)''']]
+
<div class="col-md-2">
−
:[[EPDM Details:D2.7.2-2 Parapets & Copings (Parapet - Wall Transition)|D2.7.2-2 Parapets & Copings (Parapet - Wall Transition)'''(Under Construction)''']]
+
:[[File:EPDM_Roof_Systems.jpg| link=http://rpm.rcabc.org/images/f/fe/EPDM_Roof_Systems.jpg | 175 px]]
 +
</div>
  
−
:[[EPDM Details:D2.7.3-1 Edges & Fascia (Cant Edge)|D2.7.3-1 Edges & Fascia (Cant Edge)'''(Under Construction)''']]
+
<div class="col-md-10">
−
:[[EPDM Details:D2.7.3-2 Edges & Fascia (Gravel Stop)|D2.7.3-2 Edges & Fascia (Gravel Stop)'''(Under Construction)''']]
+
:The drawings linked on this page are intended to represent a variety of EPDM Membrane roof system applications while remaining generic with regards to manufacturers&#8217; specific application specifications. They do not represent all possible ''manufacturer'' application roof system designs. Consult each ''manufacturer's'' specifications and the '''''RoofStar Guarantee Standards''''' to develop a system acceptable to both the manufacturer and the '''''RoofStar Guarantee Program'''''.
  
−
:[[EPDM Details:D2.7.4-1 Counter-flashings & Reglets (Deck - Wall Supported)|D2.7.4-1 Counter-flashings & Reglets (Deck - Wall Supported)'''(Under Construction)''']]
+
:For further information about EPDM Membrane System designs and requirements, see the '''[https://rpm.rcabc.org/index.php?title=EPDM_Roof_Systems_Standard Standard for EPDM Membrane Roof Systems]'''.
−
:[[EPDM Details:D2.7.4-2 Counter-flashings & Reglets (Deck - Unsupported by Wall)|D2.7.4-2 Counter-flashings & Reglets (Deck - Unsupported by Wall)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.4-3 Counter-flashings & Reglets (Stucco Wall: Re-roofing)|D2.7.4-3 Counter-flashings & Reglets (Stucco Wall: Re-roofing)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.4-4 Counter-flashings & Reglets (Stucco Wall: New)|D2.7.4-4 Counter-flashings & Reglets (Stucco Wall: New)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.4-5 Counter-flashings & Reglets (Double Surface Reglet)|D2.7.4-5 Counter-flashings & Reglets (Double Surface Reglet)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.4-6 Counter-flashings & Reglets (Low Door Sill)|D2.7.4-6 Counter-flashings & Reglets (Low Door Sill)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.4-7 Counter-flashings & Reglets (Window Curb)|D2.7.4-7 Counter-flashings & Reglets (Window Curb)'''(Under Construction)''']]
 
 
</div>
 
</div>
−
<div class="col-md-6">
 
−
:[[EPDM Details:D2.7.5-1 Roof-Wall Transitions (Expansion Joint)|D2.7.5-1 Roof-Wall Transitions (Expansion Joint)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.5-2 Roof-Wall Transitions (Divider/Joint)|D2.7.5-2 Roof-Wall Transitions (Divider/Joint)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.5-3 Roof-Wall Transitions (Fire Separation Joint)|D2.7.5-3 Roof-Wall Transitions (Fire Separation Joint)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.5-4 Roof-Wall Transitions (Fire Separation Wall)|D2.7.5-4 Roof-Wall Transitions (Fire Separation Wall)'''(Under Construction)''']]
 
  
−
:[[EPDM Details:D2.7.6-1 Curbs & Sleepers (Equipment Sleeper)|D2.7.6-1 Curbs & Sleepers (Equipment Sleeper)'''(Under Construction)''']]
+
<div class="col-md-12">
−
:[[EPDM Details:D2.7.6-2 Curbs & Sleepers (Multiple Roof Penetrations)|D2.7.6-2 Curbs & Sleepers (Multiple Roof Penetrations)'''(Under Construction)''']]
+
</div>
−
:[[EPDM Details:D2.7.6-3 Curbs & Sleepers (Basic Curb)|D2.7.6-3 Curbs & Sleepers (Basic Curb)]]
+
<div class="col-md-4">
−
:[[EPDM Details:D2.7.6-4 Curbs & Sleepers (Mechanical Opening)|D2.7.6-4 Curbs & Sleepers (Mechanical Opening)]]
+
<hr>
−
:[[EPDM Details:D2.7.6-5 Curbs & Sleepers (Pre-curb for Planters)|D2.7.6-5 Curbs & Sleepers (Pre-curb for Planters)'''(Under Construction)''']]
+
===Part 1 - General===
 +
====='''Permitted Roof Systems''' ([[EPDM_Roof_Systems_Standard#1.1.3.1._Permitted_Roof_Systems | Article 1.1.3.1.]])=====
 +
<ol>
 +
<li>[[EPDM Conventionally Insulated System (Typical)| Conventionally Insulated System (Typical)]]
 +
<li>[[EPDM Conventionally Insulated System (Alternate) | Conventionally Insulated System (Alternate)]]
 +
<li>[[EPDM Protected Roof Assembly (Typical) | Protected Roof Assembly (Typical)]]
 +
</li></ol>
  
−
:[[EPDM Details:D2.7.7-1 Strip-in Flashings (Metal Plumbing)|D2.7.7-1 Strip-in Flashings (Metal Plumbing)'''(Under Construction)''']]
+
===Part 6 - Air and Vapour Controls===
−
:[[EPDM Details:D2.7.7-2 Strip-in Flashings (Two-part Cable)|D2.7.7-2 Strip-in Flashings (Two-part Cable)]]
+
====='''Continuity and Support''' ([[EPDM_Roof_Systems_Standard#6.3.2.1._Continuity_and_Support | Article 6.3.2.1.]])=====
−
:[[EPDM Details:D2.7.7-3 Strip-in Flashings (Pourable Sealer Pocket)|D2.7.7-3 Strip-in Flashings (Pourable Sealer  Pocket)'''(Under Construction)''']]
+
<ol>
 +
<li>[[EPDM Air and Vapour Controls (Field) | {{hilite | Air and Vapour Controls (Field)|| 2021-February-7 }}]]
 +
</li></ol>
  
−
:[[EPDM Details:D2.7.8-1 Water & Drainage (Cast Iron Drain)|D2.7.8-1 Water & Drainage (Cast Iron Drain)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.8-2 Water & Drainage (Spun Copper Drain)|D2.7.8-2 Water & Drainage (Spun Copper Drain)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.8-3 Water & Drainage (Clamping Spun Copper Drain)|D2.7.8-3 Water & Drainage (Clamping Spun Copper Drain)]]
 
−
:[[EPDM Details:D2.7.8-4 Water & Drainage (Open Wall Scupper)|D2.7.8-4 Water & Drainage (Open Wall Scupper)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.8-5 Water & Drainage (Through-wall Scupper)|D2.7.8-5 Water & Drainage (Through-wall Scupper)'''(Under Construction)''']]
 
  
−
:[[EPDM Details:D2.7.9-1 Miscellaneous Penetrations (Roof Anchor)|D2.7.9-1 Miscellaneous Penetrations (Roof Anchor)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.9-2 Miscellaneous Penetrations (Wall Anchor - Conventional Roof Assy)|D2.7.9-2 Miscellaneous Penetrations (Wall Anchor - Conventional Roof Assy)'''(Under Construction)''']]
 
−
:[[EPDM Details:D2.7.9-3 Miscellaneous Penetrations (Wall Anchor - Protected Roof Assy)|D2.7.9-3 Miscellaneous Penetrations (Wall Anchor - Protected Roof Assy)'''(Under Construction)''']]
 
 
</div>
 
</div>
 +
<div class="col-md-4">
 +
<hr>
  
 +
===Part 10 - Perimeters and Walls===
 +
====='''General Application''' ([[EPDM_Roof_Systems_Standard#10.3.2.3._General_Application_Requirements_for_Perimeters_and_Walls | Article 10.3.2.3.]])=====
 +
<ol>
 +
<li>[[EPDM Membrane Termination A | Membrane Termination A]]
 +
<li>[[EPDM Membrane Termination B | Membrane Termination B]]
 +
<li>[[EPDM Membrane Termination C | Membrane Termination C]]
 +
<li>[[EPDM Membrane Termination D | Membrane Termination D]]
 +
<li>[[EPDM Membrane Termination E | Membrane Termination E]]
 +
<li>[[EPDM Membrane Termination F | Membrane Termination F]]
 +
</li></ol>
  
 +
===Part 11 - Drainage===
 +
 +
</div>
 +
<div class="col-md-4">
 
<hr>
 
<hr>
  
 +
===Part 12 - Penetrations and Curbs===
  
 +
===Part 13 - Linear Metal Flashing===
 +
:See the separate page, [[Linear_Metal_Flashing_Details | Construction Details for Linear Metal Flashings]].
  
 +
===Part 14 - The Roof as a Platform===
  
−
[[EPDM (Thermoset Membranes) Roof Systems|<i class="fa fa-chevron-circle-left" ></i> Back to ''EPDM Roof Systems'']]
+
</div>
  
−
[[Construction Details|<i class="fa fa-chevron-circle-left" ></i> Back to ''Construction Details Section'']]
+
<div class="col-md-12">
 +
<hr>
 +
 
 +
[[EPDM Roof Systems Standard|<i class="fa fa-chevron-circle-left" ></i> ''Standard for EPDM Membrane Roof Systems'']]
 +
 
 +
[[Main Page | <i class="fa fa-home fa"></i> Home]]
 +
{{Template:RPM Page Footer with Copyright and Current Date}}
 +
</div>

Latest revision as of 16:30, 26 February 2024



Division D - Construction Details
Construction Details for EPDM Membrane Roof Systems
EPDM Roof Systems.jpg
The drawings linked on this page are intended to represent a variety of EPDM Membrane roof system applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturer's specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
For further information about EPDM Membrane System designs and requirements, see the Standard for EPDM Membrane Roof Systems.

Part 1 - General

Permitted Roof Systems ( Article 1.1.3.1.)
  1. Conventionally Insulated System (Typical)
  2. Conventionally Insulated System (Alternate)
  3. Protected Roof Assembly (Typical)

Part 6 - Air and Vapour Controls

Continuity and Support ( Article 6.3.2.1.)
  1. Air and Vapour Controls (Field)


Part 10 - Perimeters and Walls

General Application ( Article 10.3.2.3.)
  1. Membrane Termination A
  2. Membrane Termination B
  3. Membrane Termination C
  4. Membrane Termination D
  5. Membrane Termination E
  6. Membrane Termination F

Part 11 - Drainage

Part 12 - Penetrations and Curbs

Part 13 - Linear Metal Flashing

See the separate page, Construction Details for Linear Metal Flashings.

Part 14 - The Roof as a Platform

Standard for EPDM Membrane Roof Systems

Home

© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Retrieved from "http://rpm.rcabc.org/index.php?title=EPDM_Roof_System_Details&oldid=47338"