|
|
| Line 46: |
Line 46: |
| | *[https://rpm.rcabc.org/images/d/d1/Soprema_Sopranature_Soprafiltre_TDS.pdf '''Soprafiltre'''] | | *[https://rpm.rcabc.org/images/d/d1/Soprema_Sopranature_Soprafiltre_TDS.pdf '''Soprafiltre'''] |
| | *[https://rpm.rcabc.org/images/7/7e/Soprema_Sopranature_Sopradrain_ECO-5_TDS.pdf '''Sopradrain Eco-5'''] | | *[https://rpm.rcabc.org/images/7/7e/Soprema_Sopranature_Sopradrain_ECO-5_TDS.pdf '''Sopradrain Eco-5'''] |
| | + | :'''XPS Insulation''' by roofing ''Contractor'' (Refer to the [[VRA Standard | RGC Standard for Vegetated Roofs]]) |
| | *[https://rpm.rcabc.org/images/b/bb/Soprema_Sopranature_Soprabarrier_20_%26_30_TDS.pdf '''Soprabarrier 20''' or '''30'''] | | *[https://rpm.rcabc.org/images/b/bb/Soprema_Sopranature_Soprabarrier_20_%26_30_TDS.pdf '''Soprabarrier 20''' or '''30'''] |
| | *'''Soprema approved tape''' | | *'''Soprema approved tape''' |
| − | :'''Conventionally Insulated Roof Assembly''' by roofing ''Contractor'' | + | :'''Waterproofing Roof Assembly''' (membrane) by roofing ''Contractor'' |
| | *[https://rpm.rcabc.org/images/f/f3/Soprema_Sopranature_Metal_Edging_TDS.pdf '''Sopranature<sup>®</sup> metal edging'''] | | *[https://rpm.rcabc.org/images/f/f3/Soprema_Sopranature_Metal_Edging_TDS.pdf '''Sopranature<sup>®</sup> metal edging'''] |
| | *[https://rpm.rcabc.org/images/e/e4/Soprema_Sopranature_Inspection_Chamber_TDS.pdf '''Sopranature<sup>®</sup> inspection chambers'''] | | *[https://rpm.rcabc.org/images/e/e4/Soprema_Sopranature_Inspection_Chamber_TDS.pdf '''Sopranature<sup>®</sup> inspection chambers'''] |
Revision as of 18:09, 28 November 2024
Division C - Accepted Materials
Group - Vegetated Roof Systems
SOPRANATURE® Extensive-Inverted Vegetated Roof
by Soprema Inc.
| Material Acceptance and Product Details
The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.
|
- Vegetated Roof System Manufacturer
- Soprema Inc.
- Accepted for the RoofStar Guarantee Program
- October 25, 2024
- Accepted for application in
- Vegetated Roof Systems
- Acceptance Criteria
- Refer to the RGC Standard for Vegetated Roofs
- System Summary
- SOPRANATURE® Extensive Vegetated Systems by SOPREMA®are light green roofs of less than 150 mm of SOPRAFLOR substrate. Vegetation types typically include sedums, grasses and other perennials requiring low maintenance. This system is specifically designed for protected membrane roof assemblies" ("inverted" roofs).
- Manufacturer Online Resource
- SORPANATURE Extensive Vegetated Roof Systems
- System Type
- Extensive
- System Depth
- 88.1 mm (3-6/16") to 164.3 mm (6-6/16")
- Growing Media Depth
- 76.3 mm (3") to 152.4 mm (6")
- Vegetation Profile
- sedums, grasses, and other perennials
- Suitable climate zones
- All BC zones, subject to manufacturer's approval
- System Components*
- In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS)
- †Guarantor's Notes
- Systems labeled "Inverted" are designed for a protected membrane roof assembly, also known as an inverted roof assembly.
- While Semi-intensive and Intensive vegetated roof systems are limited to only protected membrane roofs (See the Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for conventionally insulated roofs. To request a written Variance to the published limitation, follow the requirements in Article 1.1.3.6..
- *Conditions and Limitations
- Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight.
- Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.
|
Back to Accepted Materials
Home
