Difference between revisions of "Materials:SKYWATER Ballasted-Inverted Hybrid Roof"

Latest revision as of 23:20, 2 December 2024

Division C - Accepted Materials
Group - Vegetated Roof Systems

SKYWATER^® Ballasted-Inverted Hybrid Roof
by Soprema Inc.

Material Acceptance and Product Details

The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Vegetated Roof System Manufacturer: Soprema Inc.
Accepted for the RoofStar Guarantee Program: October 25, 2024
Accepted for application in: Vegetated Roof Systems
Acceptance Criteria: Refer to the RGC Standard for Vegetated Roofs
System Summary: SKYWATER^® Ballasted Hybrid Systems by SOPREMA^® are a combination of blue roof and green roof. This system reduces the volume of rainwater sent to the sewer in addition to decreasing its flow. Water is absorbed by the SOPRANATURE^® vegetated system as well as by SOPRARETENTIO BOARD, providing a higher retention capacity than a green roof alone (See the link at right to the manufacturer's online resources page for more information).

Manufacturer Online Resource: SKYWATER Ballasted-Inverted Hybrid Roof
System Type: "Hybrid" (Blue-Green); see Sentences 1.1.3.2.(6) through (8) in the "RGC Standard for Vegetated Roofs".
System Depth: 107.9 mm (4-1/4") 336.5 mm (13-1/4") +
Growing Media Depth: 76.3 mm (3") 304.8 mm (12") +
Vegetation Profile: Sedums, dry prairie grasses, dry flower meadows, and vegetation with a range of water needs, inclusive of urban agricultural crops (as specified by the Design Authority/Green Roof Design Professional. See Conditions and Limitations. Suitable vegetation depends on the selection of growing media).
Suitable climate zones: All BC zones, subject to manufacturer's approval
System Components^*: In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS)

Sedum Mats Sopraflor I growing media Sopraretentio Mat Sopraretentio Board Soprafiltre Sopradrain Eco-5 XPS Insulation by roofing Contractor (Refer to the RGC Standard for Vegetated Roofs) Soprabarrier 30 Soprema approved tape Waterproofing Roof Assembly (membrane) by roofing Contractor Sopranature^® metal edging Sopranature^® inspection chambers

^†Guarantor's Notes: Systems labeled "Inverted" are designed for a protected membrane roof assembly, also known as an inverted roof assembly.

While Semi-intensive and Intensive vegetated roof systems are limited to only protected membrane roofs (See the Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for conventionally insulated roofs. To request a written Variance to the published limitation, follow the requirements in Article 1.1.3.6..

^*Conditions and Limitations: Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight.

Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.

Back to Accepted Materials

Home

@@ Line 23: / Line 23: @@
 ;Accepted for application in: Vegetated Roof Systems
 ;Acceptance Criteria: Refer to the [[VRA Standard | RGC Standard for Vegetated Roofs]]
-;System Summary: SKYWATER<sup>®</sup> Ballasted Hybrid Systems by SOPREMA<sup>®</sup> are a combination of blue roof and green roof.  This system reduces the volume of rainwater sent to the sewer in addition to decreasing its flow. Water is absorbed by the SOPRANATURE<sup>®</sup> vegetated system as well as by SOPRARETENTIO BOARD, providing a higher retention capacity than a green roof alone.
+;System Summary: SKYWATER<sup>®</sup> Ballasted Hybrid Systems by SOPREMA<sup>®</sup> are a combination of blue roof and green roof.  This system reduces the volume of rainwater sent to the sewer in addition to decreasing its flow. Water is absorbed by the SOPRANATURE<sup>®</sup> vegetated system as well as by SOPRARETENTIO BOARD, providing a higher retention capacity than a green roof alone (See the link at right to the manufacturer's online resources page for more information).
 <div style="text-align: left;">
-[[File:Extensive VR System (sedum tile).jpg| left | 450 px| link=]]
+[[File:Extensive VR System (banner).JPG| left | class=img-responsive |  link=]]
 </div>
 </div>
 <div class="col-md-6">
 ;:
+;Manufacturer Online Resource: [https://www.soprema.ca/en/products-systems/skywater-ballasted-inverted-hybrid-roof SKYWATER Ballasted-Inverted Hybrid Roof]
+;System Type: "Hybrid" (Blue-Green); see [https://rpm.rcabc.org/index.php?title=VRA_Standard#1.1.3.2._Permitted_Vegetated_Roof_Systems Sentences 1.1.3.2.(6) through (8)] in the "RGC Standard for Vegetated Roofs".
 ;System Depth: 107.9 mm (4-1/4") 	336.5 mm (13-1/4") +
 ;Growing Media Depth: 76.3 mm (3") 	304.8 mm (12") +
-;Vegetation Profile: Sedums, dry prairie grasses, dry flower meadows, and vegetation with a range of water needs, inclusive of urban agricultural crops (suitable vegetation depends on the selection of growing media).
+;Vegetation Profile: Sedums, dry prairie grasses, dry flower meadows, and vegetation with a range of water needs, inclusive of urban agricultural crops (as specified by the ''Design Authority''/''Green Roof Design Professional''.  See '''Conditions and Limitations'''.  Suitable vegetation depends on the selection of growing media).
 ;Suitable climate zones: All BC zones, subject to manufacturer's approval
-;System Components:
+;System Components<sup>*</sup>: In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS)
-:'''Sedum Mats''' by Soprema, or non-sedum mat supplied by others* (Click [https://rpm.rcabc.org/images/5/5f/Soprema_Sopranature_Sedum_Mat_TDS.pdf here] for the Technical Data Sheet PDF)
+:{| class="wikitable"
-:'''Sopraflor I''' growing media (Click [link here] for the Technical Data Sheet PDF)
+|-
-:'''Sopraretentio Mat''' (Click [link here] for the Technical Data Sheet PDF)
+|
-:'''Soprafiltre''' (Click [link here] for the Technical Data Sheet PDF)
+*[https://rpm.rcabc.org/images/5/5f/Soprema_Sopranature_Sedum_Mat_TDS.pdf '''Sedum Mats''']
-:'''Sopradrain Eco-5''' (Click [link here] for the Technical Data Sheet PDF)
+*[https://rpm.rcabc.org/images/f/ff/Soprema_Sopranature_Sopraflor_X_%26_I_TDS.pdf '''Sopraflor I''' growing media]
-:'''Soprabarrier 30''' (Click [link here] for the Technical Data Sheet PDF)
+*[https://rpm.rcabc.org/images/7/7b/Soprema_Sopranature_Sopraretentio_Mat_TDS.pdf '''Sopraretentio Mat''']
-:Soprema approved tape
+*[https://rpm.rcabc.org/images/3/3f/Soprema_Sopranature_Sopraretentio_Board_TDS.pdf  '''Sopraretentio Board''']
-:Sopranature<sup>®</sup> metal edging
+*[https://rpm.rcabc.org/images/d/d1/Soprema_Sopranature_Soprafiltre_TDS.pdf '''Soprafiltre''']
-:Sopranature<sup>®</sup> inspection chambers
+*[https://rpm.rcabc.org/images/7/7e/Soprema_Sopranature_Sopradrain_ECO-5_TDS.pdf '''Sopradrain Eco-5''']
+:'''XPS Insulation''' by roofing ''Contractor'' (Refer to the [[VRA Standard | RGC Standard for Vegetated Roofs]])
+*[https://rpm.rcabc.org/images/b/bb/Soprema_Sopranature_Soprabarrier_20_%26_30_TDS.pdf '''Soprabarrier 30''']
+:'''Soprema approved tape'''
+:'''Waterproofing Roof Assembly''' (membrane) by roofing ''Contractor''
+*[https://rpm.rcabc.org/images/f/f3/Soprema_Sopranature_Metal_Edging_TDS.pdf '''Sopranature<sup>®</sup> metal edging''']
+*[https://rpm.rcabc.org/images/e/e4/Soprema_Sopranature_Inspection_Chamber_TDS.pdf '''Sopranature<sup>®</sup> inspection chambers''']
+|}
+</div>
+<div class="col-md-12">
+<hr>
+<div class="col-md-6">
+;<sup>†</sup>Guarantor's Notes: Systems labeled "Inverted" are designed for a ''protected membrane roof assembly'', also known as an inverted ''roof assembly''.
+:While ''Semi-intensive'' and ''Intensive vegetated roof systems'' are limited to only ''protected membrane roofs'' (See the [https://rpm.rcabc.org/index.php?title=VRA_Standard#1.1.3.2._Permitted_Vegetated_Roof_Systems Sentence 1.1.3.2.(5)] in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for ''conventionally insulated roofs''.  To request a written Variance to the published limitation, follow the requirements in [https://rpm.rcabc.org/index.php?title=VRA_Standard#1.1.3.6._Variances Article 1.1.3.6.].
+</div>
+<div class="col-md-6">
-;Conditions and Limitations: Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements.  Consult with the ''vegetated roof system manufacturer'' for options and saturated system weight.
+;<sup>*</sup>Conditions and Limitations: Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements.  Consult with the ''vegetated roof system manufacturer'' for options and saturated system weight.
 :Also note that vegetation coverage under the '''''RoofStar Vegetated Roof Guarantee''''' applies only to ''extensive systems'' planted with mats or trays - see [https://rpm.rcabc.org/index.php?title=Guarantee Part 3] of Division A for more about coverage.
 </div>
 </div>
+<div class="col-md-12">
+<br>
 |}