Accepted Materials 1

Division C - Accepted Materials
Group - Vegetated Roof Systems

---

LiveRoof® Lite System (Conventional Roof)
by LiveRoof LLC

System/Material Acceptance and Product Details The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this system and its various materials recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Vegetated Roof System Manufacturer LiveRoof LLC Accepted for the RoofStar Guarantee Program January 20, 2026 Accepted for application in Vegetated Roof Systems Acceptance Criteria Refer to the RGC Standard for Vegetated Roofs System Summary The Lite System is typically used on retrofit projects when the roof is engineered with only 15 to 17 pounds per sf for the green roof component. Its soil depth is a full 2 ½ inches, enough to support many low growing succulents and a limited number of accent plants. It is generally not recommended for hot climates. LiveRoof Lite provides a modest level of storm water management and may provide modest energy savings—especially if attentively irrigated during the warm season. It also meets greenspace requirements in many instances, and provides limited biodiversity. Its plants will support pollinators such as butterflies and honeybees, and the plants that grow in the Lite System are diverse enough to support patterned designs. The plants used in the Lite System include a fairly broad range of low growing Sedums—mostly fine- and medium-textured, as well as a few Alliums, for vertical and textural interest. (adapted from the manufacturer's literature) Manufacturer online resources LiveRoof Lite System System Type Extensive System Depth Varies with plant profile Growing Media Depth 6.35 cm (2-1/2") Vegetation Profile A mixture of climate specific moss-sedums Suitable climate zones All BC zones, subject to manufacturer's approval System Components* In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS) Vegetation [link LiveRoof® Engineered Growing Media] [link WindDisc™] [link LiveRoof® Lite Module] (serves as Drainage & Filtration layer) [link RoofBlue® Retain ] [link RoofBlue® Detain ] [link PipeRunner™] [link RoofEdge® Aluminum Tie-off Box] [link RoofEdge® Aluminum Drain] [link RoofEdge® Aluminum Edging] [link RoofStone™ Paver ] Root Barrier (supplied by roofing manufacturer/contractor) †Guarantor's Notes Systems labeled "Inverted" are designed for a protected membrane roof assembly, also known as an inverted roof assembly. While Semi-intensive and Intensive vegetated roof systems are limited to only protected membrane roofs (See the Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for conventionally insulated roofs. To request a written Variance to the published limitation, follow the requirements in Article 1.1.3.6.. *Conditions and Limitations Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight. Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.

---

Back to Accepted Materials

Home