Accepted Materials 6

Division C - Accepted Materials
Group - Vegetated Roof Systems

---

LiveRoof® Deep System (Protected Membrane Assembly)
by LiveRoof LLC

System/Material Acceptance and Product Details The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this system and its various materials recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Vegetated Roof System Manufacturer LiveRoof LLC Accepted for the RoofStar Guarantee Program January 20, 2026 Accepted for application in Vegetated Roof Systems Acceptance Criteria Refer to the RGC Standard for Vegetated Roofs System Summary The Deep System by LiveRoof LLC is used for biodiverse green roofs. With 6 inch soil depth it becomes possible to support a broad array of non-succulent plants. One can literally create a prairie or shade garden on the roof. Naturally the weight is greater, appx. 40-50 pounds per square foot, depending upon soil and plants, but the weight is not so heavy as to greatly drive up the cost of the supporting structure. LiveRoof's Deep System is primarily used for biodiversity, prairies, and garden-like perennial plantings. It also allows for food growing and shade planting, on roofs that are too shady for succulent plants. The Deep System is excellent for saving energy, good for storm water management, and easily meets most green space requirements. The type of plants used in the Deep System include a full array of low to tall growing Sedums, hundreds of different fibrous rooted herbaceous perennials, including native forbs, sedges, grasses and edible plants. But, one should avoid plants with woody root systems such as shrubs, as they can damage waterproofing. Foliage colors can vary widely; green, yellow, red, purple and blue are possible, and flowers of any color and shape are found within the broad palette of plants capable of growing in its 6 inch soil profile. (adapted from the manufacturer's literature) Manufacturer online resources LiveRoof Lite System System Type Extensive System Depth Varies with plant profile Growing Media Depth 15.24 cm (6") Vegetation Profile A mixture of climate specific sedum-herbaceous-grass Suitable climate zones All BC zones, subject to manufacturer's approval System Components* In the usual order, from top to bottom; click on link for Technical Data Sheet (TDS) or product drawing (not all components are supported by a TDS) LiveRoof Lite (Protected Membrane Assembly) Properties (TDS) Vegetation (Consult LiveRoof LLC for available plant profiles) LiveRoof® Engineered Growing Media (Consult LiveRoof LLC for precise blend specifications) WindDisc™ (TDS) LiveRoof® Deep Module (PMR) (Drawing) RoofBlue® Retain/Detain (TDS) RoofBlue® Retain (Deep) (Drawing) RoofBlue® Detain (Deep) (Drawing) PipeRunner™ (Drawing) RoofEdge® Aluminum Tie-off Box (Drawing) RoofEdge® Aluminum Drain (Drawing) RoofEdge® Aluminum Edging (Drawing) RoofStone™ Paver (Specification) Root Barrier (supplied by roof membrane manufacturer) †Guarantor's Notes Systems labeled "Inverted" are designed for a protected membrane roof assembly, also known as an inverted roof assembly. While Semi-intensive and Intensive vegetated roof systems are limited to only protected membrane roofs (See the Sentence 1.1.3.2.(5) in the "RGC Standard for Vegetated Roofs"), some vegetated roof system manufacturers offer their systems for conventionally insulated roofs. To request a written Variance to the published limitation, follow the requirements in Article 1.1.3.6.. *Conditions and Limitations Note that system thickness is dependent upon the selection of components, which is determined (in part) by design parameters, including hydrological requirements. Consult with the vegetated roof system manufacturer for options and saturated system weight. Also note that vegetation coverage under the RoofStar Vegetated Roof Guarantee applies only to extensive systems planted with mats or trays - see Part 3 of Division A for more about coverage.

---

Back to Accepted Materials

Home