Difference between revisions of "SBS Plumbing Vent (Conventional Roof System)"

Revision as of 18:43, 5 August 2016

1 WORK INCLUDED

(1) Gypsum Deck Overlay: If required by design authority.
(2) Vapour Retarder: If required by design authority.
(3) Insulation: Mechanically fastened. See available insulation products in the Accepted Materials section of this Manual.
(4) Insulation Overlay Board
(5) Primary Membrane and Membrane Protection
(6) Mastic: As approved by manufacturer.
(7) Membrane Flashing: Onto primed metal flashing flange or adhesive coated for non-bituminous flexible membrane systems.
(8) Storm Collar, Typical Lead Cap or Typical Aluminum Cap: Re-roofing only. Non- bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamps for use with pipes that extend above flashing.

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Plumbing Stack: Extend to match top of metal flashing.
(C) Wood Blocking: Optional.
(D) Metal Flashing: Apply in a bed of mastic. Fastened over membrane to wood blocking or roof deck.
(E) Typical Aluminum Cap: For use with aluminum flashing. See requirements for Settlement Caps on strip-in plumbing flashings.
(F) Typical Lead Cap: For use with lead flashing.
(G) Storm Collar: Non-Bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamp. Use with pipes that extend above flashings.

NOTE

Refer to RGC Guarantee Standards for additional requirements
Aluminum flashings required for torch-applied roof systems.

Back to SBS Application

Back to SBS Construction Details

Back to Construction Details

@@ Line 2: / Line 2: @@
 === WORK INCLUDED ===
-(1) <b>Gypsum Overlay Board: </b>If required by design authority.
+;(1) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSSUBSTRATES|'''Gypsum Deck Overlay''']]: If required by design authority.
+;(2) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSVAPOUR|'''Vapour Retarder''']]: If required by design authority.
+;(3) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSINSULATION|'''Insulation''']]: Mechanically fastened.  See available insulation products in the [[Roof Deck Insulation|'''Accepted Materials''']] section of this Manual.
+;(4) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSINSULATIONOVERLAY|'''Insulation Overlay Board''']]:
+;(5) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSBASE|'''Primary Membrane and Membrane Protection''']]
+;(6) '''Mastic''': As approved by manufacturer.
+;(7) [[RoofStar Guarantee Standards for SBS Roof Systems#SBS-STRIPPING|'''Membrane Flashing''']]: Onto primed metal flashing flange or adhesive coated for non-bituminous flexible membrane systems.
+;(8) '''Storm Collar, Typical Lead Cap or Typical Aluminum Cap''': Re-roofing only. Non- bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamps for use with pipes that extend above flashing.
-(2) <b>Vapour Retarder:</b>  If required by design authority.
+<hr>
-(3) <b>Insulation:</b>  See list of accepted materials in Section 2.2.
-(4) <b>Insulation Overlay:</b>  As required. See <i>RGC Guarantee Standard B4.1, B4.2 </i>and<i> C4.1</i>
-(5) <b>Primary Membrane and Membrane Protection</b>
-(6) <b>Mastic:</b>  As approved by manufacturer.
-(7)<b> </b><b>Membrane Flashing:</b> Onto primed metal flashing flange or adhesive coated for non-bituminous flexible membrane systems.
-(8) <b>Storm Collar, Typical Lead Cap or Typical Aluminum Cap: </b>Reroofing only. Non- bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamps for use with pipes that extend above flashings.
 === RELATED WORK BY OTHERS ===
-(A) <b>Acceptable Deck</b>
+;(A) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSDECKS|'''Acceptable Deck''']]
+;(B) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSSETTLEMENT|'''Plumbing Stack''']]: Extend to match top of metal flashing.
-(B) <b>Plumbing Stack:</b>  Extend to match top of metal flashing.
+;(C) [[RoofStar Guarantee Standards for SBS Roof Systems#SBSWOODBLOCKING|'''Wood Blocking''']]: Optional.
+;(D) [[RoofStar Guarantee Standards for SBS Roof Systems#METALCAP-SBS|'''Metal Flashing''']]: Apply in a bed of mastic. Fastened over membrane to wood blocking or roof deck.
-(C) <b>Wood Blocking:</b> Optional.
+;(E) '''Typical Aluminum Cap''': For use with aluminum flashing.   See requirements for [[RoofStar Guarantee Standards for SBS Roof Systems#SBSSETTLEMENT|'''Settlement Caps''']] on strip-in plumbing flashings.
+;(F) '''Typical Lead Cap''': For use with lead flashing.
-(D) <b>Metal Flashing:</b>  Apply in a bed of mastic. Fastened over membrane to wood blocking or roof deck.
+;(G) '''Storm Collar''': Non-Bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamp. Use with pipes that extend above flashings.
-(E) <b>Typical Aluminum Cap:</b> For use with aluminum flashings.
-(F) <b>Typical Lead Cap:</b> For use with lead flashings.
-(G) <b>Storm Collar: </b> Non-Bituminous flexible membrane skirt collar, sealed with compatible sealant and stainless steel hose clamp. Use with pipes that extend above flashings.