Difference between revisions of "ASM Curb (Split Panel Flashing)"

Revision as of 18:03, 10 August 2016

1 WORK INCLUDED

(1) Underlayment: The type of underlay required is determined by roof slope (see Section 8.1.4.1 and Section 8.1.4.2).
(2) Slip Sheet: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
(3) Metal Panel Clip: Installed to metal roof panel manufacturer's printed instructions.
(4) Architectural Metal Roof Panel
(5) Metal Curb Flashing
(6) Cricket: Required for curbs more than 900 mm (36") wide
(7) Acceptable Caulking: Two rows accepted caulking between overlapping sheets, with preformed closures on trapezoidal ribbed roof panels.
(8) Metal Counter Flashing

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Wood Curb: 200 mm (8") minimum height

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Back to ASM Application

Back to ASM Construction Details

Back to Construction Details

@@ Line 1: / Line 1: @@
-<hr>
 [[File:8.1.4.10.1.jpg]]
 === WORK INCLUDED ===
+;(1) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMUNDERLAYMENT|'''Underlayment''']]: The type of underlay required is determined by roof slope (see Section 8.1.4.1 and Section 8.1.4.2).
+;(2) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMSLIP|'''Slip Sheet''']]: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
+;(3) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMCLIP|'''Metal Panel Clip''']]: Installed to metal roof panel manufacturer's printed instructions.
+;(4) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMPANEL |'''Architectural Metal Roof Panel''']]
+;(5) '''Metal Curb Flashing'''
+;(6) '''Cricket''': Required for curbs more than 900 mm (36") wide
+;(7) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMCAULK |'''Acceptable Caulking''']]: Two rows accepted caulking between overlapping sheets, with preformed closures on trapezoidal ribbed roof panels.
+;(8) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMCOUNTER |'''Metal Counter Flashing''']]
-(1) <b>Underlayment</b>: The type of underlay required is determined by roof slope (see Section 8.1.4.1 and Section 8.1.4.2).
+<hr>
-(2) <b>Slip Sheet</b>: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
-(3) <b>Metal Panel Clip</b>: Installed to metal roof panel manufacturer&#8217;s printed instructions.
-(4) <b>Architectural Metal Roof Panel</b>
-(5) <b>Metal Curb Flashing </b>
-(6) <b>Cricket</b>: Required for curbs more than 900 mm (36") wide
-(7) <b>Accepted Caulking</b>: Two rows accepted caulking between overlapping sheets, with preformed closures on trapezoidal ribbed roof panels.
-(8) <b>Counter Flashing</b>
 === RELATED WORK BY OTHERS ===
+;(A) [[RoofStar Guarantee Standards for ASM Roof Systems#ASMDECK|'''Acceptable Deck''']]
+;(B) '''Wood Curb''': 200 mm (8") minimum height
-(A) <b>Acceptable Deck</b>
-(B) <b>Wood Curb</b>: 200 mm (8") minimum height
-'''NOTE''': Refer to <i>RGC Guarantee Standards</i> for additional requirements.
+'''NOTE''': Refer to '''''RoofStar Guarantee Standards''''' for additional requirements.
 <hr>
@@ Line 36: / Line 25: @@
+[[Section:E. Application: Steep Slope Roofs|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Application'']]
-[[Section:E. Application: Steep Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''ASM Application'']]
+[[Architectural Sheet Metal Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''ASM Construction Details'']]
-[[Architectural Sheet Metal Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''ASM Construction Details'']]
-[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Construction Details'']]
+[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Construction Details'']]