Difference between revisions of "Manufacturers:Polyglass USA, Inc."

Jump to: navigation, search

Difference between revisions of "Manufacturers:Polyglass USA, Inc."

 
(57 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
{{Template:RPM Info}}
 +
 +
 
__NOTOC__
 
__NOTOC__
 +
__NONUMBEREDHEADINGS__
 +
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
 +
 +
<big><big>Division C - Accepted Materials</big></big>
 +
<hr>
 +
<big><big><big><big><big>Polyglass USA, Inc.</big></big></big></big></big><br>
 +
<big>Associate Member (Manufacturer)</big>
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
−
| '''Manufacturer''': Polyglass USA, Inc.
+
| style="background-color:#FFFACD"  | '''<big>Materials Listed by Category</big>'''
 +
<br>
 +
The information published in the RCABC '''''Roofing Practices Manual''''' and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the ''Guarantor''. The preparation of a detailed specification is the responsibility of the ''Design Authority''.
 +
|-
 +
|
 +
;:
 +
;Website: '''http://www.polyglass.com'''
 +
;Contact Address: See the current Membership list and contact information at [http://www.rcabc.org/members/find-a-member/ '''www.rcabc.org''']
 +
;Country of Origin: U.S.A.
 +
;Country of Manufacture: U.S.A.
 +
;Year First Installed:
 +
:BC:
 +
:Canada:
 +
:Foreign:
 +
|-
 +
| style="background-color:#FFE4B5"  | '''<big>Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes</big>'''
 +
<br>
 +
Bituminous roofing membranes are governed by RGC Acceptance Criteria [https://rpm.rcabc.org/images/9/9e/Acceptance_Criteria_RGC_ACWP-MOD.pdf RGC ACWP-MOD] (applicable to membranes accepted after July 1, 2023).  The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified
 +
bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015.
  
−
;Contact Address: See the current Membership list and contact information at [http://www.rcabc.org/members/find-a-member/ www.rcabc.org]
+
The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024).
−
;:
 
−
;Plant Locations:
 
  
−
'''DESCRIPTION'''
+
Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard.  Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction.  Consult the local manufacturer's representative through the [https://www.rcabc.org/members/find-a-member/ "Find a Member"] page on the RCABC association website.
−
TBA
+
|-
 
|}
 
|}
−
<div class="col-md-4">
 
  
−
:'''At present, this manufacturer does not have any products in the''' '''''RoofStar Guarantee Program'''''.
+
<div class="col-md-3">
 +
<big><big>'''Waterproofing Roofs'''</big></big>
 +
<hr>
 +
 
 +
====Insulation====
 +
:'''Polyisocyanurate Foam'''
 +
:[[Materials:Polytherm G | Polytherm G]] <small><small>awaiting TDS</small></small>
 +
 
 +
====Insulation Overlay Panels====
 +
:'''Asphaltic Overlays'''
 +
:[[Materials:Polyboard E | Polyboard E (4.5 and 6 mm)]] <small><small>awaiting TDS</small></small>
 +
:[[Materials:Polyboard W | Polyboard W (4.5 mm)]] <small><small>awaiting TDS</small></small>
 +
 
 +
:'''Membrane-laminated Overlays'''
 +
:[[Materials:Polyboard 180 Combo | {{hilite | Polyboard 180 Combo (Base sheet, Overlay Board) || 2025-January-31 }}]]
 +
 
 +
====SBS Polymer-Modified Bituminous Membranes====
 +
(See the membrane tables in [https://rpm.rcabc.org/index.php?title=Materials_by_Product_Category Division C])
 +
:'''Base Sheets'''
 +
:[[Materials:Elastoflex SA Base|Elastoflex SA Base]]
 +
:[[Materials:Elastoflex SA Base Plus | {{hilite | Elastoflex SA Base Plus || 2025-January-31 }}]]
 +
:[[Materials:Elasoflex SA Polar Base | {{hilite | Elasoflex SA Polar Base || 2025-January-31 }}]]
 +
:[[Materials:Elastoflex S6 2.2|Elastoflex S6 2.2 (S/S, P/S, P/P)]]
 +
:[[Materials:Elastoflex S6 2.5|Elastoflex S6 2.5 (S/S, P/S)]]
 +
:[[Materials:Elastoflex S6 3.0|Elastoflex S6 3.0 (P/P)]]
 +
:[[Materials:Elastoflex S6 HP | Elastoflex S6 HP]] <small><small>awaiting TDS</small></small>
 +
:[[Materials:Elastoflex SA V Plus | Elastoflex SA V Plus]] <small><small>awaiting TDS</small></small>
 +
:[[Materials:Elastoflex SA V Plus FR | Elastoflex SA V Plus FR]] <small><small>awaiting TDS</small></small>
 +
:[[Materials:Elastoflex V|Elastoflex V]]
 +
:[[Materials:Elastoflex VP | {{hilite | Elastoflex VP || 2025-January-31 }}]]
 +
:[[Materials: Elastovent | Elastovent]] <small><small>awaiting TDS</small></small>
 +
 
 
</div>
 
</div>
−
<div class="col-md-12">
+
<div class="col-md-3">
 +
<big><big>'''Waterproofing Roofs'''</big></big>
 +
<hr>
 +
 
 +
====SBS Polymer-Modified Bituminous Membranes (Cont.)====
 +
(See the membrane tables in [https://rpm.rcabc.org/index.php?title=Materials_by_Product_Category Division C])
 +
:'''Interplies'''
 +
:[[Materials:Elastoflex SA V|Elastoflex SA V]]
 +
:[[Materials:Elastoflex SA V FR|Elastoflex SA V FR]]
 +
 
 +
:'''Cap Sheets'''
 +
:[[Materials:Elastoflex S6 G|Elastoflex S6 G]]
 +
:[[Materials:Elastoflex S6 G FR|Elastoflex S6 G FR]]
 +
:[[Materials:Elastoflex SA P|Elastoflex SA P]]
 +
:[[Materials:Elastoflex SA P FR|Elastoflex SA P FR]]
 +
:[[Materials:Elastoflex S6 G C HP (250)|Elastoflex S6 G C HP (250)]]
 +
:[[Materials:Elastoflex S6 G C HP FR (250)|Elastoflex S6 G C HP FR (250)]]
 +
:[[Materials:Elastoflex SA P Polar Cap | Elastoflex SA P Polar Cap]] <small><small>awaiting TDS</small></small>
 +
:[[Materials:Elastoflex VP G HP | {{hilite | Elastoflex VP G HP || 2025-January-31 }}]]
 +
:[[Materials:Elastoshield TS G FR|Elastoshield TS G FR]]
 +
:[[Materials:Polyfresko G SBS|Polyfresko G SBS]]
 +
:[[Materials:Polyfresko G SBS FR|Polyfresko G SBS FR]]
 +
 
 +
====APP Polymer-Modified Bituminous Membranes====
 +
(See the membrane tables in [https://rpm.rcabc.org/index.php?title=Materials_by_Product_Category Division C])
 +
 
 +
:'''Base Sheets'''
 +
:[[Materials:Polyflex APP | {{hilite | Polyflex APP (Plastomeric) Membrane || 2025-January-31 }}]]
 +
 
 +
:'''Cap Sheets'''
 +
:[[Materials:Polyflex G | {{hilite | Polyflex G APP (Plastomeric) Granulated Cap Sheet || 2025-January-31 }}]]
 +
 
 +
====Liquid Membrane Flashing Systems====
 +
(See the membrane tables in [https://rpm.rcabc.org/index.php?title=Materials_by_Product_Category Division C])
 +
 
 +
'''Two-Component Reinforced Liquid Membrane Flashing'''
 +
:[[Materials:Polyglass PMMA Flashing | {{hilite | Polyglass PMMA Flashing || 2025-January-31 }}]]
 +
 
 +
'''Single-component Liquid Membrane Flashing'''
 +
:[[Materials:Polyflash 1C|Polyflash 1C]]
  
 +
</div>
 +
<div class="col-md-3">
 +
<big><big>'''Water-shedding Roofs'''</big></big>
 
<hr>
 
<hr>
 +
====Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)====
 +
:'''Self-adhered Materials'''
 +
:[[Materials:Polystick IR-Xe|Polystick IR-Xe]]
 +
:[[Materials:Polystick MTS|Polystick MTS]]
 +
:[[Materials:Polystick TU Plus|Polystick TU Plus]]
  
 +
====Underlayment/Eave Protection (ASM)====
 +
:'''Self-adhered Materials'''
 +
:[[Materials:Polystick MTS|Polystick MTS]]
  
 +
</div>
 +
<div class="col-md-12">
 +
<hr>
  
 +
====Accessories====
  
 +
{| class="wikitable" | style="color: black; background-color: orange; border: orange; width: 100%;"
 +
| colspan="2"  | An ''Accessory'' is a material that joins ''Primary'' or ''Secondary Materials'' together, or is connected to/with a ''Primary'' or ''Secondary material'', but does not by its nature (apart from its installation) directly affect the water or wind resistance of the ''Waterproofing'' or ''Water-shedding system''.  An '''Accessory''' is not an Accepted Material and therefore the '''''RoofStar Guarantee''''' does not extend to cover any potential material or installation failure.  Accessories are listed in the '''''Roofing Practices Manual''''' merely for reference to specifiers, designers and installers.
 +
|}
  
−
[[Materials by Manufacturer/Distributor/Certifying Authority|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Materials by Manufacturer/Distributor/Certifying Authority'']]
+
<div class="col-md-12">
 +
<div class="col-md-3">
 +
:[[Materials:PG 350|PG 350]]
  
−
[[Materials by Product Type|<i class="fa fa-chevron-circle-left fa" ></i> Back to ''Accepted Materials'']]
+
</div>
 +
<div class="col-md-3">
 +
:[[Accessories:PolySlope | PolySlope]]
 +
</div>
  
 +
<div class="col-md-3">
 +
:'''Membranes'''
 +
:[[Accessories:Polyfresko G SA | Polyfresko G SA]]
 +
:[[Accessories:Polyfresko G FR | Polyfresko G FR]]
 +
:[[Accessories:Polyfresko G | Polyfresko G]]
 +
</div>
 +
 +
<div class="col-md-3">
 +
:'''Membranes'''
 +
:[[Accessories:Polyflex G FR | Polyflex G FR]]
 +
:[[Accessories:Polyflex G HP | Polyflex G HP]]
 +
</div>
 +
 +
</div>
 +
<div class="col-md-12">
 +
 +
<hr>
  
−
[[Main Page|Home]]
+
[[Main Page | <i class="fa fa-home fa"></i> Home]]
 +
{{Tempate:RPM Page Footer with Copyright and Current Date}}
 
</div>
 
</div>

Latest revision as of 14:54, 25 June 2024




Division C - Accepted Materials

Polyglass USA, Inc.
Associate Member (Manufacturer)

Materials Listed by Category


The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Website
http://www.polyglass.com
Contact Address
See the current Membership list and contact information at www.rcabc.org
Country of Origin
U.S.A.
Country of Manufacture
U.S.A.
Year First Installed
BC:
Canada:
Foreign:
Notice and Disclaimer: Technical Data Sheets for SBS and APP Polymer-modified bituminous membranes


Bituminous roofing membranes are governed by RGC Acceptance Criteria RGC ACWP-MOD (applicable to membranes accepted after July 1, 2023). The CSA Standard for these membranes, CSA A123.23 "Product specification for polymer modified bitumen sheet, prefabricated and reinforced", forms the backbone of the RGC Acceptance Criteria and has replaced the older CGSB Standard CGSB 37-GP-56M, which was withdrawn in 2015.

The "British Columbia Building Code" (2024) references the CSA A123.23 Standard in both Part 5 and Part 9 of Division B. The Standard is also published in the National Building Code of Canada (2020), and the City of Vancouver Building Bylaw (2024).

Not all manufacturers of SBS and APP polymer-modified membranes publish technical data sheets that fully align with the CSA Standard. Therefore, the reader must verify this information independently of the RGC, to the reader's own satisfaction. Consult the local manufacturer's representative through the "Find a Member" page on the RCABC association website.

Waterproofing Roofs

Insulation

Polyisocyanurate Foam
Polytherm G awaiting TDS

Insulation Overlay Panels

Asphaltic Overlays
Polyboard E (4.5 and 6 mm) awaiting TDS
Polyboard W (4.5 mm) awaiting TDS
Membrane-laminated Overlays
Polyboard 180 Combo (Base sheet, Overlay Board)

SBS Polymer-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets
Elastoflex SA Base
Elastoflex SA Base Plus
Elasoflex SA Polar Base
Elastoflex S6 2.2 (S/S, P/S, P/P)
Elastoflex S6 2.5 (S/S, P/S)
Elastoflex S6 3.0 (P/P)
Elastoflex S6 HP awaiting TDS
Elastoflex SA V Plus awaiting TDS
Elastoflex SA V Plus FR awaiting TDS
Elastoflex V
Elastoflex VP
Elastovent awaiting TDS

Waterproofing Roofs

SBS Polymer-Modified Bituminous Membranes (Cont.)

(See the membrane tables in Division C)

Interplies
Elastoflex SA V
Elastoflex SA V FR
Cap Sheets
Elastoflex S6 G
Elastoflex S6 G FR
Elastoflex SA P
Elastoflex SA P FR
Elastoflex S6 G C HP (250)
Elastoflex S6 G C HP FR (250)
Elastoflex SA P Polar Cap awaiting TDS
Elastoflex VP G HP
Elastoshield TS G FR
Polyfresko G SBS
Polyfresko G SBS FR

APP Polymer-Modified Bituminous Membranes

(See the membrane tables in Division C)

Base Sheets
Polyflex APP (Plastomeric) Membrane
Cap Sheets
Polyflex G APP (Plastomeric) Granulated Cap Sheet

Liquid Membrane Flashing Systems

(See the membrane tables in Division C)

Two-Component Reinforced Liquid Membrane Flashing

Polyglass PMMA Flashing

Single-component Liquid Membrane Flashing

Polyflash 1C

Water-shedding Roofs

Underlayment/Eave Protection (Asphalt Shingles/Cedar/Tiles)

Self-adhered Materials
Polystick IR-Xe
Polystick MTS
Polystick TU Plus

Underlayment/Eave Protection (ASM)

Self-adhered Materials
Polystick MTS

Accessories

An Accessory is a material that joins Primary or Secondary Materials together, or is connected to/with a Primary or Secondary material, but does not by its nature (apart from its installation) directly affect the water or wind resistance of the Waterproofing or Water-shedding system. An Accessory is not an Accepted Material and therefore the RoofStar Guarantee does not extend to cover any potential material or installation failure. Accessories are listed in the Roofing Practices Manual merely for reference to specifiers, designers and installers.
PG 350
PolySlope
Membranes
Polyfresko G SA
Polyfresko G FR
Polyfresko G
Membranes
Polyflex G FR
Polyflex G HP

Home

© RCABC 2024
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Retrieved from "http://rpm.rcabc.org/index.php?title=Manufacturers:Polyglass_USA,_Inc.&oldid=47759"