|
|
| (10 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| − | <div class="row">
| |
| | | | |
| − | <div class="col-md-3" style="float:right;" id="tocDiv">
| |
| − | __TOC__
| |
| − | </div> <!-- tocDiv -->
| |
| | | | |
| − | <div class="col-md-9" id="mainBodyDiv">
| + | __NOTOC__ |
| | + | __NONUMBEREDHEADINGS__ |
| | + | {{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}} |
| | | | |
| | + | <big><big>Division C - Accepted Materials</big></big> |
| | + | <hr> |
| | + | <big><big><big><big><big>Hydrotech Membrane Corporation</big></big></big></big></big><br> |
| | + | <big>Associate Member (Manufacturer)</big> |
| | | | |
| − | | + | <tabs> |
| − | ===Part 9: Single-ply Table (5/10-year Guarantee)===
| + | <tab name="Manufacturer Information"> |
| − | | + | {| class="wikitable" |
| − | {| class="wikitable mw-datatable" style="margin-left: 10pt; margin-right: auto;border-color:#E7E9E9;vertical-align:top;text-align:top;"
| |
| − | |+ Table 9.1 Single-ply Membranes: RoofStar 5 and 10-Year Guarantee<br><small>(Applies to Field and Flashing membranes. All thicknesses shown are in mm.)<br>*Induction welding subject to the securement requirements in the applicable membrane Standard, Part 3.</small>
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="5" rowspan="1" style="vertical-align:center;text-align:center;background-color:#A9A9A9" | <span style="color:#f8f9fa">Exposed Roof Systems</span> !! rowspan="12" style="border: none; background-color:#E7E9E9" |
| |
| − | ! colspan="3" rowspan="1" style="vertical-align:top;text-align:center;background-color:#A9A9A9" | <span style="color:#f8f9fa">Protected Roof Systems</span>
| |
| − | ! rowspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#808080;" | <span style="color:#f8f9fa">Grade-level<br>Water-<br>proofing</span>
| |
| − | |-
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9;" |
| |
| − | ! colspan="4" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | Conventionally Insulated / Uninsulated Systems
| |
| − | ! colspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#4682B4">Built-in<br>Gutters</span>
| |
| − | ! rowspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#008B8B">Ballasted</span>
| |
| − | ! rowspan="1" style="vertical-align:centertext-align:center;background-color:#C0C0C0;" | <span style="color:#9370DB">PMR<br>Systems</span>
| |
| − | ! rowspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#2E8B57">Roof as a<br>Platform</span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Mechanically<br>Fastened*
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered
| |
| − | | colspan="2" rowspan="1" style="vertical-align:center;text-align:center;background-color:#DCDCDC;" | Adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Self-adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Loose-laid
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | style="vertical-align:top;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Hot-mopped<br><small>(Smooth)</small>
| |
| − | | style="vertical-align:top;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Hot-mopped<br><small>(Fleece-backed)</small>
| |
| − | |-
| |
| − | ! style="vertical-align:left;text-align:left;" | Type, Reinforcement, Grade
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#F0E68C" | EPDM (reinforced) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#EEE8AA" | EPDM (unreinforced) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 2.794 (110) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFFACD" | TPO || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 2.794 (110) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFF8DC" | PVC || rowspan="1" style="text-align:center;width=200px;" | 1.270 (50) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.270 (50) || rowspan="1" style="text-align:center;width=200px;" | 2.667 (105) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.270 (50) || rowspan="1" style="text-align:center;width=200px;" | 1.270 (50) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60)
| |
| − | |-
| |
| − | |}
| |
| − | | |
| − | ===Part 9: Single-ply Table (5/10-year Guarantee) REV. 1===
| |
| − | | |
| − | {| class="wikitable mw-datatable" style="margin-left: 10pt; margin-right: auto;border-color:#E7E9E9;vertical-align:top;text-align:top;" | |
| − | |+ Table 9.1 Single-ply Membranes: RoofStar 5 and 10-Year Guarantee<br><small>(Applies to Field and Flashing membranes. All thicknesses shown are in mm.)</small>
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="5" rowspan="1" style="vertical-align:center;text-align:center;background-color:#A9A9A9" | <span style="color:#f8f9fa">Exposed Roof Systems</span> !! rowspan="12" style="border: none; background-color:#E7E9E9" |
| |
| − | ! colspan="2" rowspan="1" style="vertical-align:top;text-align:center;background-color:#A9A9A9" | <span style="color:#f8f9fa">Protected Roof Systems</span>
| |
| − | ! rowspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#808080;" | <span style="color:#f8f9fa">Grade-level<br>Water-<br>proofing</span>
| |
| − | |-
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9;" |
| |
| − | ! colspan="4" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | Conventionally Insulated / Uninsulated Systems
| |
| − | ! colspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#4682B4">Built-in<br>Gutters</span>
| |
| − | ! rowspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#008B8B">Ballasted</span>
| |
| − | ! rowspan="1" style="vertical-align:centertext-align:center;background-color:#C0C0C0;" | <span style="color:#9370DB">PMR<br>Systems</span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Mechanically<br>Fastened*
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered
| |
| − | | colspan="2" rowspan="1" style="vertical-align:center;text-align:center;background-color:#DCDCDC;" | Adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Self-adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Loose-laid
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| | |- | | |- |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" | | + | | style="background-color:#FFFACD" | '''<big>Materials Listed by Category under Tabs Above</big>''' |
| − | | style="vertical-align:top;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Hot-mopped<br><small>(Smooth)</small>
| + | <br> |
| − | | style="vertical-align:top;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Hot-mopped<br><small>(Fleece-backed)</small>
| + | The information published in the RCABC '''''Roofing Practices Manual''''' and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the ''Guarantor''. The preparation of a detailed specification is the responsibility of the ''Design Authority''. |
| − | |-
| |
| − | ! style="vertical-align:left;text-align:left;" | Type, Reinforcement, Grade
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| | |- | | |- |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#F0E68C" | EPDM (reinforced) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> | + | | |
| − | |-
| + | ;: |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#EEE8AA" | EPDM (unreinforced) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 2.794 (110) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| + | ;Website: '''http://en.hydrotechmembrane.ca/''' |
| − | |-
| + | ;Contact Address: See the current Membership list and contact information at [http://www.rcabc.org/members/find-a-member/ '''www.rcabc.org'''] |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFFACD" | TPO || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 2.794 (110) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | 1.143 (45) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| + | ;Country of Origin: U.S.A. |
| − | |-
| + | ;Country of Manufacture: U.S.A. |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFF8DC" | PVC || rowspan="1" style="text-align:center;width=200px;" | 1.270 (50) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.270 (50) || rowspan="1" style="text-align:center;width=200px;" | 2.667 (105) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.270 (50) || rowspan="1" style="text-align:center;width=200px;" | 1.270 (50) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60)
| + | ;Year First Installed: |
| − | |-
| + | :BC: |
| | + | :Canada: |
| | + | :Foreign: |
| | |} | | |} |
| − | :<small>*Induction welding subject to the securement requirements in the applicable membrane Standard, Part 3.</small>
| |
| | | | |
| − | ===Part 9: Single-ply Table (15-year Guarantee)(FINAL)=== | + | </tab> |
| | + | <tab name="Materials for Waterproofing Roofs"> |
| | + | <div class="col-md-12"> |
| | | | |
| − | {| class="wikitable mw-datatable" style="margin-left: 10pt; margin-right: auto;border-color:#E7E9E9;vertical-align:top;text-align:top;"
| + | <hr> |
| − | |+ Table 9.2 Single-ply Membranes: RoofStar 15-Year Guarantee<br><small>(Applies to Field and Flashing membranes. All thicknesses shown are in mm.)<br>*Induction welding subject to the securement requirements in the applicable membrane Standard, Part 3.</small>
| + | ====Hot Fluid-applied Rubberized Asphalt Membranes==== |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| + | :*[[Materials:Monolithic Membrane 6125|Monolithic Membrane 6125]] |
| − | ! colspan="5" rowspan="1" style="vertical-align:center;text-align:center;background-color:#A9A9A9" | <span style="color:#f8f9fa">Exposed Roof Systems</span> !! rowspan="12" style="border: none; background-color:#E7E9E9" |
| |
| − | ! colspan="3" rowspan="1" style="vertical-align:top;text-align:center;background-color:#A9A9A9" | <span style="color:#f8f9fa">Protected Roof Systems</span>
| |
| − | ! rowspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#808080;" | <span style="color:#f8f9fa">Grade-level<br>Water-<br>proofing</span>
| |
| − | |-
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9;" |
| |
| − | ! colspan="4" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | Conventionally Insulated / Uninsulated Systems
| |
| − | ! colspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#4682B4">Built-in<br>Gutters</span>
| |
| − | ! rowspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#008B8B">Ballasted</span>
| |
| − | ! rowspan="1" style="vertical-align:centertext-align:center;background-color:#C0C0C0;" | <span style="color:#9370DB">PMR<br>Systems</span>
| |
| − | ! rowspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#2E8B57">Roof as a<br>Platform</span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Mechanically<br>Fastened*
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered
| |
| − | | colspan="2" rowspan="1" style="vertical-align:center;text-align:center;background-color:#DCDCDC;" | Adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Self-adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Loose-laid
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | style="vertical-align:top;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Hot-mopped<br><small>(Smooth)</small>
| |
| − | | style="vertical-align:top;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Hot-mopped<br><small>(Fleece-backed)</small>
| |
| − | |-
| |
| − | ! style="vertical-align:left;text-align:left;" | Type, Reinforcement, Grade
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#B0C4DE" | EPDM (reinforced) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 2.286 (90) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.286 (90) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#ADD8E6" | EPDM (unreinforced) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.790 (110) || rowspan="1" style="text-align:center;width=200px;" | 2.286 (90) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.286 (90) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#E0FFFF" | TPO || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.790 (110) || rowspan="1" style="text-align:center;width=200px;" | 2.032 (80) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.032 (80) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#F0FFFF " | PVC || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.667 (105) || rowspan="1" style="text-align:center;width=200px;" | 2.032 (80) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.032 (80) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | |} | |
| | | | |
| − | ===Part 9: Single-ply Table (15-year Guarantee) REV. 1===
| + | </div> |
| | + | </tab> |
| | | | |
| − | {| class="wikitable mw-datatable" style="margin-left: 10pt; margin-right: auto;border-color:#E7E9E9;vertical-align:top;text-align:top;"
| + | <tab name="Materials for Waterproofing at Grade"> |
| − | |+ Table 9.2 Single-ply Membranes: RoofStar 15-Year Guarantee<br><small>(Applies to Field and Flashing membranes. All thicknesses shown are in mm.)</small>
| + | <div class="col-md-12"> |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| + | <hr> |
| − | ! colspan="5" rowspan="1" style="vertical-align:center;text-align:center;background-color:#A9A9A9" | <span style="color:#f8f9fa">Exposed Roof Systems</span> !! rowspan="12" style="border: none; background-color:#E7E9E9" |
| |
| − | ! colspan="2" rowspan="1" style="vertical-align:top;text-align:center;background-color:#A9A9A9" | <span style="color:#f8f9fa">Protected Roof Systems</span>
| |
| − | ! rowspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#808080;" | <span style="color:#f8f9fa">Grade-level<br>Water-<br>proofing</span>
| |
| − | |-
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9;" |
| |
| − | ! colspan="4" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | Conventionally Insulated / Uninsulated Systems
| |
| − | ! colspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#4682B4">Built-in<br>Gutters</span>
| |
| − | ! rowspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#008B8B">Ballasted</span>
| |
| − | ! rowspan="1" style="vertical-align:centertext-align:center;background-color:#C0C0C0;" | <span style="color:#9370DB">PMR<br>Systems</span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Mechanically<br>Fastened*
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered
| |
| − | | colspan="2" rowspan="1" style="vertical-align:center;text-align:center;background-color:#DCDCDC;" | Adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Self-adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Loose-laid
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-adhered,<br>Adhesive-<br>applied<br><small>or</small><br>Hot-mopped
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | style="vertical-align:top;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Hot-mopped<br><small>(Smooth)</small>
| |
| − | | style="vertical-align:top;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied<br><small>or</small><br>Hot-mopped<br><small>(Fleece-backed)</small>
| |
| − | |-
| |
| − | ! style="vertical-align:left;text-align:left;" | Type, Reinforcement, Grade
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | ! colspan="1" rowspan="1" style="vertical-align:center;text-align:center;" | <small>mm (mils)</small>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#B0C4DE" | EPDM (reinforced) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 2.032 (80) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#ADD8E6" | EPDM (unreinforced) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.790 (110) || rowspan="1" style="text-align:center;width=200px;" | 2.032 (80) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#E0FFFF" | TPO || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.790 (110) || rowspan="1" style="text-align:center;width=200px;" | 2.286 (90) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#F0FFFF " | PVC || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | 2.667 (105) || rowspan="1" style="text-align:center;width=200px;" | 2.286 (90) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | 1.524 (60) || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | |}
| |
| | | | |
| − | :<small>*Induction welding subject to the securement requirements in the applicable membrane Standard, Part 3.</small> | + | ====Hot Fluid-applied Rubberized Asphalt Membranes==== |
| | + | :*[[Materials:Monolithic Membrane 6125|Monolithic Membrane 6125]] |
| | | | |
| − | ===Part 9: 2-ply Model (5/10-year Guarantee)(REV. FINAL)===
| + | </div> |
| | + | </tab> |
| | | | |
| − | {| class="wikitable mw-datatable" style="margin-left: 10pt; margin-right: auto;border-color:#E7E9E9;vertical-align:top;text-align:top;"
| + | <tab name="Vegetated Roofs"> |
| − | |+ Table 9.1 SBS-modified Bituminous Membranes: RoofStar 5 and 10-Year Guarantee<br><small>Applies to Field and Flashing membranes. All thicknesses shown are in mm</small>
| |
| − | ! colspan="1"; style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="8" rowspan="1" style="vertical-align:center;text-align:center;background-color:#A9A9A9;" | <span style="color:#f8f9fa">Exposed Roof Systems</span> !! rowspan="14" style="border: none; background-color:#E7E9E9" |
| |
| − | ! colspan="4" rowspan="1" style="vertical-align:top;text-align:center;background-color:#A9A9A9;" | <span style="color:#f8f9fa">Protected Roof Systems</span>
| |
| − | ! colspan="2" rowspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#808080;" | <span style="color:#f8f9fa">Grade-level<br>Water-<br>proofing</span>
| |
| − | |-
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="5" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#2a4b8d;">Conventionally Insulated / Uninsulated Systems
| |
| − | ! colspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#4682B4">Built-in<br>Gutters</span>
| |
| − | ! colspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#C0C0C0;" | <span style="color:#008B8B">Single-<br>ply<br>Cap</span>
| |
| − | ! colspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#C0C0C0;" | <span style="color:#9370DB">PMR<br>Systems</span>
| |
| − | ! colspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#C0C0C0;" | <span style="color:#2E8B57">Roof as a<br>Platform</span>
| |
| | | | |
| − | |-
| + | <div class="col-md-12"> |
| − | | colspan="1" style="border:none;background-color:#E7E9E9;" |
| + | <div style="text-align:center; vertical-align:center"> |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Mechanic-<br>ally<br>fastened
| + | :<big><big>Vegetated Roof Systems</big></big> |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded
| + | </div> |
| − | | colspan="3" rowspan="1" style="vertical-align:center;text-align:center;background-color:#DCDCDC;" | Adhered
| + | <div class="col-md-2"> |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied,<br>Self-<br>adhered
| + | <hr> |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied
| + | [[File:Extensive VR System (sedum tile).jpg|class=img-responsive| link=http://rpm.rcabc.org/images/2/29/SBS_1.3.1-1.jpg]] |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| + | </div> |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied,<br>Self-<br>adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-<br>adhered
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Hot-<br>mopped
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied
| |
| − | |-
| |
| − | ! style="vertical-align:left;text-align:left;background-color:#C0C0C0" | Type, Reinforcement, Grade
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px; background-color:#EEE8AA" | Base (fibreglass) - Gr. 3 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#EEE8AA" | Base (polyester) - Gr. 3 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#EEE8AA" | Base (composite) - Gr. 3 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i>|| rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFFACD" | Film Cap (fibreglass) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFFACD" | Film Cap (polyester) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFFACD" | Film Cap (composite) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFF8DC" | Granule Cap (fibreglass) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFF8DC" | Granule Cap (polyester) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#FFF8DC" | Granule Cap (composite) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | |}
| |
| | | | |
| | + | <div class="col-md-3"> |
| | + | <hr> |
| | | | |
| − | ===Part 9: 2-ply Model (5/10-year Guarantee) REV. 1=== | + | ====Extensive Systems==== |
| | + | *[[Materials:Hydrotech Extensive Garden Roof Assembly | Hydrotech Extensive Garden Roof<sup>®</sup> Assembly]] |
| | | | |
| − | {| class="wikitable mw-datatable" style="margin-left: 10pt; margin-right: auto;border-color:#E7E9E9;vertical-align:top;text-align:top;"
| + | </div> |
| − | |+ Table 9.1 SBS-modified Bituminous Membranes: RoofStar 5 and 10-Year Guarantee<br><small>Applies to Field and Flashing membranes. All thicknesses shown are in mm</small>
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="6" rowspan="1" style="vertical-align:center;text-align:center;background-color:#A9A9A9;" | <span style="color:#f8f9fa">Exposed Roof Systems</span> !! rowspan="20" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="2" rowspan="1" style="vertical-align:top;text-align:center;background-color:#A9A9A9;" | <span style="color:#f8f9fa">Protected Roof Systems</span>
| |
| − | ! colspan="2" rowspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#808080;" | <span style="color:#f8f9fa">Grade-level<br>Water-<br>proofing</span>
| |
| − | |-
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="5" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#2a4b8d;">Conventionally Insulated / Uninsulated Systems
| |
| − | ! colspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#4682B4">Built-in<br>Gutters</span>
| |
| − | ! colspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#C0C0C0;" | <span style="color:#9370DB">PMR<br>Systems</span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none;background-color:#E7E9E9;" |
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Mechanic-<br>ally<br>fastened
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded
| |
| − | | colspan="3" rowspan="1" style="vertical-align:center;text-align:center;background-color:#DCDCDC;" | Adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied,<br>Self-<br>adhered
| |
| − | </span>
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied,<br>Self-<br>adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-<br>adhered
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Hot-<br>mopped
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied
| |
| − | |-
| |
| − | ! style="text-align:left;background-color:#C0C0C0" | Type, Reinforcement, Grade
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | |-
| |
| − | | colspan="14" style="border:none;background-color:#E7E9E9;" |
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#A9A9A9" | Minimum Combined 2-ply Thickness || colspan="6" rowspan="1" style="text-align:center;" | 6.00 || rowspan="1" style="text-align:center;" | 6.00 || rowspan="1" style="text-align:center;" | N/A || rowspan="1" style="text-align:center;" | 6.00 || rowspan="1" style="text-align:center;width=200px;" | N/A
| |
| − | |-
| |
| − | | colspan="14" style="border:none;background-color:#E7E9E9;" |
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#EEE8AA" | Base (Fibreglass) - Gr. 3 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#EEE8AA" | Base (Composite fibreglass) - Gr. 3 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#EEE8AA" | Base (Polyester) - Gr. 3 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#EEE8AA" | Base (Composite) - Gr. 3 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.30 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#EEE8AA" | Factory Laminated Base (panel) || colspan="5" rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | N/A || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | N/A
| |
| − | |-
| |
| − | | colspan="14" style="border:none;background-color:#E7E9E9;" |
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#FFFACD" | Film Cap (Fibreglass) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#FFFACD" | Film Cap (Polyester) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#FFFACD" | Film Cap (Composite) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#FFF8DC" | Granule Cap (Fibreglass) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#FFF8DC" | Granule Cap (Polyester) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#FFF8DC" | Granule Cap (Composite) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.30 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | |}
| |
| | | | |
| − | ===Part 9: 2-ply Model (15-year Guarantee)(REV. FINAL)=== | + | <div class="col-md-3"> |
| | + | <hr> |
| | | | |
| − | {| class="wikitable mw-datatable" style="margin-left: 10pt; margin-right: auto;border-color:#E7E9E9;vertical-align:top;text-align:top;"
| + | ====Semi-intensive Systems==== |
| − | |+ Table 9.2 SBS-modified Bituminous Membranes: RoofStar 15-Year Guarantee<br><small>Applies to Field and Flashing membranes. All thicknesses shown are in mm</small>
| + | *[[Materials:Hydrotech Semi-intensive Garden Roof Assembly |Hydrotech Semi-intensive Garden Roof<sup>®</sup> Assembly]] |
| − | ! colspan="1"; style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="8" rowspan="1" style="vertical-align:center;text-align:center;background-color:#A9A9A9;" | <span style="color:#f8f9fa">Exposed Roof Systems</span> !! rowspan="14" style="border: none; background-color:#E7E9E9" |
| |
| − | ! colspan="4" rowspan="1" style="vertical-align:top;text-align:center;background-color:#A9A9A9;" | <span style="color:#f8f9fa">Protected Roof Systems</span>
| |
| − | ! colspan="2" rowspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#808080;" | <span style="color:#f8f9fa">Grade-level<br>Water-<br>proofing</span>
| |
| − | |- | |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="5" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#2a4b8d;">Conventionally Insulated / Uninsulated Systems
| |
| − | ! colspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#4682B4">Built-in<br>Gutters</span>
| |
| − | ! colspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#C0C0C0;" | <span style="color:#008B8B">Single-<br>ply<br>Cap</span>
| |
| − | ! colspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#C0C0C0;" | <span style="color:#9370DB">PMR<br>Systems</span>
| |
| − | ! colspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#C0C0C0;" | <span style="color:#2E8B57">Roof as a<br>Platform</span>
| |
| | | | |
| − | |-
| + | </div> |
| − | | colspan="1" style="border:none;background-color:#E7E9E9;" |
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Mechanic-<br>ally<br>fastened
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded
| |
| − | | colspan="3" rowspan="1" style="vertical-align:center;text-align:center;background-color:#DCDCDC;" | Adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied,<br>Self-<br>adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied,<br>Self-<br>adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-<br>adhered
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Hot-<br>mopped
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied
| |
| − | |-
| |
| − | ! style="vertical-align:left;text-align:left;background-color:#C0C0C0" | Type, Reinforcement, Grade
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px; background-color:#B0C4DE" | Base (fibreglass) - Gr. 3 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#B0C4DE" | Base (polyester) - Gr. 3 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#B0C4DE" | Base (composite) - Gr. 3 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#ADD8E6" | Film Cap (fibreglass) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#ADD8E6" | Film Cap (polyester) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#ADD8E6" | Film Cap (composite) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#E0FFFF" | Granular Cap (fibreglass) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#E0FFFF" | Granular Cap (polyester) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#E0FFFF" | Granular Cap (composite) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;width=200px;" | 400
| |
| − | |-
| |
| − | |}
| |
| | | | |
| − | ===Part 9: 2-ply Model (15-year Guarantee) REV. 1=== | + | <div class="col-md-3"> |
| | + | <hr> |
| | | | |
| − | {| class="wikitable mw-datatable" style="margin-left: 10pt; margin-right: auto;border-color:#E7E9E9;vertical-align:top;text-align:top;"
| + | ====Intensive Systems==== |
| − | |+ Table 9.1 SBS-modified Bituminous Membranes: RoofStar 5 and 10-Year Guarantee<br><small>Applies to Field and Flashing membranes. All thicknesses shown are in mm</small>
| + | *[[Materials:Hydrotech Intensive Garden Roof Assembly | Hydrotech Intensive Garden Roof<sup>®</sup> Assembly]] |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="6" rowspan="1" style="vertical-align:center;text-align:center;background-color:#A9A9A9;" | <span style="color:#f8f9fa">Exposed Roof Systems</span> !! rowspan="20" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="2" rowspan="1" style="vertical-align:top;text-align:center;background-color:#A9A9A9;" | <span style="color:#f8f9fa">Protected Roof Systems</span>
| |
| − | ! colspan="2" rowspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#808080;" | <span style="color:#f8f9fa">Grade-level<br>Water-<br>proofing</span>
| |
| − | |-
| |
| − | ! colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | ! colspan="5" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#2a4b8d;">Conventionally Insulated / Uninsulated Systems
| |
| − | ! colspan="1" style="vertical-align:center;text-align:center;background-color:#C0C0C0;" | <span style="color:#4682B4">Built-in<br>Gutters</span>
| |
| − | ! colspan="2" style="vertical-align:center;text-align:center;width:100px;background-color:#C0C0C0;" | <span style="color:#9370DB">PMR<br>Systems</span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none;background-color:#E7E9E9;" |
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Mechanic-<br>ally<br>fastened
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded
| |
| − | | colspan="3" rowspan="1" style="vertical-align:center;text-align:center;background-color:#DCDCDC;" | Adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied,<br>Self-<br>adhered
| |
| − | </span>
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Heat-<br>welded,<br>Adhesive-<br>applied,<br>Self-<br>adhered
| |
| − | | rowspan="2" style="vertical-align:center;text-align:center;background-color:#D3D3D3" | <span style="writing-mode:vertical-rl;"><small>Puncture Resistance</small></span>
| |
| − | |-
| |
| − | | colspan="1" style="border:none; background-color:#E7E9E9" |
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Self-<br>adhered
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Hot-<br>mopped
| |
| − | | style="vertical-align:center;text-align:center;background-color:#D3D3D3" | Adhesive-<br>applied
| |
| − | |-
| |
| − | ! style="text-align:left;background-color:#C0C0C0" | Type, Reinforcement, Grade
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | ! style="vertical-align:center;text-align:center;" | mm
| |
| − | ! style="vertical-align:center;text-align:center;" | (N)
| |
| − | |-
| |
| − | | colspan="14" style="border:none;background-color:#E7E9E9;" |
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#A9A9A9" | Minimum Combined 2-ply Thickness || colspan="6" rowspan="1" style="text-align:center;" | 7.00 || rowspan="1" style="text-align:center;" | 7.00 || rowspan="1" style="text-align:center;" | N/A || rowspan="1" style="text-align:center;" | 7.00 || rowspan="1" style="text-align:center;width=200px;" | N/A
| |
| − | |-
| |
| − | | colspan="14" style="border:none;background-color:#E7E9E9;" |
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px; background-color:#B0C4DE" | Base (fibreglass) - Gr. 3 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#B0C4DE" | Base (Composite fibreglass) - Gr. 3 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.90 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#B0C4DE" | Base (polyester) - Gr. 3 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.90 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;width=200px;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#B0C4DE" | Base (composite) - Gr. 3 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | 2.90 || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.50 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;background-color:#B0C4DE" | Factory Laminated Base (panel) || colspan="5" rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 2.20 || rowspan="1" style="text-align:center;" | N/A || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;width=200px;" | N/A
| |
| − | |-
| |
| − | | colspan="14" style="border:none;background-color:#E7E9E9;" |
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#ADD8E6" | Film Cap (fibreglass) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#ADD8E6" | Film Cap (polyester) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#ADD8E6" | Film Cap (composite) - Gr. 2 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#E0FFFF" | Granular Cap (fibreglass) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i>
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#E0FFFF" | Granular Cap (polyester) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 400
| |
| − | |-
| |
| − | | rowspan="1" style="text-align:left;width=200px;background-color:#E0FFFF" | Granular Cap (composite) - Gr. 1 || rowspan="1" style="text-align:center;" | <i class="fa fa-times"></i> || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 4.00 || rowspan="1" style="text-align:center;" | 3.00 || rowspan="1" style="text-align:center;" | 400 || rowspan="1" style="text-align:center;" | 3.50 || rowspan="1" style="text-align:center;" | 400
| |
| − | |-
| |
| − | |}
| |
| | | | |
| − | ===Part 1: RoofStar 15-year Guarantee) SBS===
| + | </div> |
| − | <ol>
| + | </div> |
| − | <li>To qualify for a '''''RoofStar 15-year (Waterproofing Roofs) Guarantee''''', the following standards apply:
| |
| − | <ol>
| |
| − | <li>Each ''Project'' must be designed and constructed {{hilite | in compliance with both || 2021-February-7 }} the '''''RoofStar Guarantee Standards''''' and the membrane manufacturer’s 20-year {{hilite | System || 2021-February-7 }} Warranty standards.
| |
| − | <li>The ''Contractor'' must apply to the membrane manufacturer for their 20-year System Warranty standards.
| |
| − | <li>Where enhanced roof system securement is required by the manufacturer, which may exceed the securement required in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'' or a custom-engineered securement, the ''Project'' must comply with the higher securement requirements.
| |
| − | <li>In addition to the above, other requirements in this Standard apply, which can be summarized (without limitation) as follows:
| |
| − | <ol>
| |
| − | <li>Roofs must be designed for adequate access to facilitate maintenance ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#Accessibility_for_Maintenance 1.3.3]).
| |
| − | <li>Materials left in place for partial roof system replacement must be scanned for moisture ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#Membrane_Replacement 1.4.2.2]).
| |
| − | <li>All roofs (new construction and replacement roofing) must be built with a minimum slope of 2% (1:50) ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#New_Construction_2 2.2.2] and [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#Replacement_Roofing 2.2.3]).
| |
| − | <li>All replacement roofing must utilize crickets to enhance drainage around curbs and sleepers ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#Replacement_Roofing 2.2.3]).
| |
| − | <li>Curbs and sleepers wider/longer than 1200 mm (48") must incorporate crickets to improve drainage ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#RoofStar_15-Year_Guarantee_4 7.1.2.1]).
| |
| − | <li>An insulation overlay is required on all ''Conventionally Insulated Roof Systems'' ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#RoofStar_15-Year_Guarantee_6 8.1.1.1]).
| |
| − | <li>Only certain membranes will qualify for a '''''RoofStar 15-year Guarantee''''' ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#Materials_9 9.2]). | |
| − | <li>All drains and overflows require clamping rings, and overflows are required for each roof area ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#RoofStar_15-Year_Guarantee_12 11.1.2.1]).
| |
| − | <li>Enhanced penetration flashing requirements ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#RoofStar_15-Year_Guarantee_13 11.1.3.1]).
| |
| − | <li>Linear metal flashings must be fabricated from 24-gauge material ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#RoofStar_15-Year_Guarantee_15 13.1.2.1]).
| |
| − | </li></ol>
| |
| − | </li></ol>
| |
| − | </li></ol>
| |
| | | | |
| − | ===Part 1: RoofStar 15-year Guarantee) EPDM===
| + | </tab> |
| − | <ol>
| + | </tabs> |
| − | <li>To qualify for a '''''RoofStar 15-year (Waterproofing Roofs) Guarantee''''', the following standards apply:
| |
| − | <ol>
| |
| − | <li>Each ''Project'' must be designed and constructed {{hilite | in compliance with both || 2021-February-7 }} the '''''RoofStar Guarantee Standards''''' and the membrane manufacturer’s 20-year {{hilite | System || 2021-February-7 }} Warranty standards.
| |
| − | <li>The ''Contractor'' must apply to the membrane manufacturer for their 20-year System Warranty standards.
| |
| − | <li>Where enhanced roof system securement is required by the manufacturer, which may exceed the securement required in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'' or a custom-engineered securement, the ''Project'' must comply with the higher securement requirements.
| |
| − | <li>In addition to the above, other requirements in this Standard apply, which can be summarized (without limitation) as follows:
| |
| − | <ol>
| |
| − | <li>Roofs must be designed for adequate access to facilitate maintenance ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#Accessibility_for_Maintenance 1.3.3]).
| |
| − | <li>Materials left in place for partial roof system replacement must be scanned for moisture ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#Membrane_Replacement 1.4.2.2]).
| |
| − | <li>All roofs (new construction and replacement roofing) must be built with a minimum slope of 2% (1:50) ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#New_Construction_2 2.2.2] and [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#Replacement_Roofing 2.2.3]).
| |
| − | <li>All replacement roofing must utilize crickets to enhance drainage around curbs and sleepers ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#Replacement_Roofing 2.2.3]).
| |
| − | <li>Curbs and sleepers wider/longer than 1200 mm (48") must incorporate crickets to improve drainage ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#RoofStar_15-Year_Guarantee_4 7.1.2.1]).
| |
| − | <li>An insulation overlay is required on all ''Conventionally Insulated Roof Systems'' ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#RoofStar_15-Year_Guarantee_6 8.1.1.1]).
| |
| − | <li>Only certain membranes will qualify for a '''''RoofStar 15-year Guarantee''''' ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#Materials_9 9.2]). | |
| − | <li>All drains and overflows require clamping rings, and overflows are required for each roof area ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#RoofStar_15-Year_Guarantee_12 11.1.2.1]).
| |
| − | <li>Enhanced penetration flashing requirements ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#RoofStar_15-Year_Guarantee_13 11.1.3.1]).
| |
| − | <li>Linear metal flashings must be fabricated from 24-gauge material ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#RoofStar_15-Year_Guarantee_15 13.1.2.1]).
| |
| − | </li></ol>
| |
| − | </li></ol>
| |
| − | </li></ol>
| |
| | | | |
| − | ===Part 1: RoofStar 15-year Guarantee) TPO===
| + | <div class="col-md-12"> |
| − | <ol>
| |
| − | <li>To qualify for a '''''RoofStar 15-year (Waterproofing Roofs) Guarantee''''', the following standards apply:
| |
| − | <ol>
| |
| − | <li>Each ''Project'' must be designed and constructed {{hilite | in compliance with both || 2021-February-7 }} the '''''RoofStar Guarantee Standards''''' and the membrane manufacturer’s 20-year {{hilite | System || 2021-February-7 }} Warranty standards.
| |
| − | <li>The ''Contractor'' must apply to the membrane manufacturer for their 20-year System Warranty standards.
| |
| − | <li>Where enhanced roof system securement is required by the manufacturer, which may exceed the securement required in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'' or a custom-engineered securement, the ''Project'' must comply with the higher securement requirements.
| |
| − | <li>In addition to the above, other requirements in this Standard apply, which can be summarized (without limitation) as follows:
| |
| − | <ol>
| |
| − | <li>Roofs must be designed for adequate access to facilitate maintenance ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#Accessibility_for_Maintenance 1.3.3]).
| |
| − | <li>Materials left in place for partial roof system replacement must be scanned for moisture ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#Membrane_Replacement 1.4.2.2]).
| |
| − | <li>All roofs (new construction and replacement roofing) must be built with a minimum slope of 2% (1:50) ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#New_Construction_2 2.2.2] and [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#Replacement_Roofing 2.2.3]).
| |
| − | <li>All replacement roofing must utilize crickets to enhance drainage around curbs and sleepers ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#Replacement_Roofing 2.2.3]). | |
| − | <li>Curbs and sleepers wider/longer than 1200 mm (48") must incorporate crickets to improve drainage ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#RoofStar_15-Year_Guarantee_4 7.1.2.1]).
| |
| − | <li>An insulation overlay is required on all ''Conventionally Insulated Roof Systems'' ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#RoofStar_15-Year_Guarantee_6 8.1.1.1]).
| |
| − | <li>Only certain membranes will qualify for a '''''RoofStar 15-year Guarantee''''' ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#Materials_9 9.2]).
| |
| − | <li>All drains and overflows require clamping rings, and overflows are required for each roof area ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#RoofStar_15-Year_Guarantee_12 11.1.2.1]).
| |
| − | <li>Enhanced penetration flashing requirements ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#RoofStar_15-Year_Guarantee_13 11.1.3.1]).
| |
| − | <li>Linear metal flashings must be fabricated from 24-gauge material ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#RoofStar_15-Year_Guarantee_15 13.1.2.1]).
| |
| − | </li></ol>
| |
| − | </li></ol>
| |
| − | </li></ol>
| |
| | | | |
| − | ===Part 1: RoofStar 15-year Guarantee) PVC===
| |
| − | <ol>
| |
| − | <li>To qualify for a '''''RoofStar 15-year (Waterproofing Roofs) Guarantee''''', the following standards apply:
| |
| − | <ol>
| |
| − | <li>Each ''Project'' must be designed and constructed {{hilite | in compliance with both || 2021-February-7 }} the '''''RoofStar Guarantee Standards''''' and the membrane manufacturer’s 20-year {{hilite | System || 2021-February-7 }} Warranty standards.
| |
| − | <li>The ''Contractor'' must apply to the membrane manufacturer for their 20-year System Warranty standards.
| |
| − | <li>Where enhanced roof system securement is required by the manufacturer, which may exceed the securement required in a ''Tested Assembly'', an ''Assembly with Proven Past Performance'' or a custom-engineered securement, the ''Project'' must comply with the higher securement requirements.
| |
| − | <li>In addition to the above, other requirements in this Standard apply, which can be summarized (without limitation) as follows:
| |
| − | <ol>
| |
| − | <li>Roofs must be designed for adequate access to facilitate maintenance ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#Accessibility_for_Maintenance 1.3.3]).
| |
| − | <li>Materials left in place for partial roof system replacement must be scanned for moisture ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#Membrane_Replacement 1.4.2.2]).
| |
| − | <li>All roofs (new construction and replacement roofing) must be built with a minimum slope of 2% (1:50) ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#New_Construction_2 2.2.2] and [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#Replacement_Roofing 2.2.3]).
| |
| − | <li>All replacement roofing must utilize crickets to enhance drainage around curbs and sleepers ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#Replacement_Roofing 2.2.3]).
| |
| − | <li>Curbs and sleepers wider/longer than 1200 mm (48") must incorporate crickets to improve drainage ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#RoofStar_15-Year_Guarantee_4 7.1.2.1]).
| |
| − | <li>An insulation overlay is required on all ''Conventionally Insulated Roof Systems'' ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#RoofStar_15-Year_Guarantee_6 8.1.1.1]).
| |
| − | <li>Only certain membranes will qualify for a '''''RoofStar 15-year Guarantee''''' ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#Materials_9 9.2]).
| |
| − | <li>All drains and overflows require clamping rings, and overflows are required for each roof area ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#RoofStar_15-Year_Guarantee_12 11.1.2.1]).
| |
| − | <li>Enhanced penetration flashing requirements ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#RoofStar_15-Year_Guarantee_13 11.1.3.1]).
| |
| − | <li>Linear metal flashings must be fabricated from 24-gauge material ([http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#RoofStar_15-Year_Guarantee_15 13.1.2.1]).
| |
| − | </li></ol>
| |
| − | </li></ol>
| |
| − | </li></ol>
| |
| | | | |
| − | ==={{hilite | Available Guarantees (from Division A) || 2020-July-3 }}===
| + | <hr> |
| − | RoofStar Guarantees are available for five (5), ten (10) or fifteen (15)* years for commercial, industrial, institutional, multi-family, stratified and residential roofing and grade-level waterproofing. For a summary list of '''''RoofStar 15-year Guarantee''''' requirements, see '''1.3.1''' in any of the '''''RoofStar Guarantee''''' roof system Standards: [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_SBS_Modified_Bitumen_Membrane_Systems#RoofStar_15-Year_Guarantee SBS], [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_EPDM_Membrane_Systems#RoofStar_15-Year_Guarantee EPDM], [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_TPO_Membrane_Systems#RoofStar_15-Year_Guarantee TPO], and [http://rpm.rcabc.org/index.php?title=RoofStar_Guarantee_Standards_for_PVC_Membrane_Systems#RoofStar_15-Year_Guarantee PVC].
| |
| | | | |
| − | </div><!-- mainBodyDiv --> | + | [[Main Page | <i class="fa fa-home fa"></i> Home]] |
| − | </div><!-- row --> | + | {{Tempate:RPM Page Footer with Copyright and Current Date}} |
| | + | </div> |
