Difference between revisions of "Materials:Aluminum Stack (Pipe flashing) (Precision)"

Latest revision as of 17:22, 22 July 2026

Notice to the Reader: The information published in the RCABC Roofing Practices Manual and offered below does NOT represent a complete set of the manufacturer’s data or specifications, nor is this material recommended or endorsed by the Guarantor. The preparation of a detailed specification is the responsibility of the Design Authority.

Manufacturer and Acceptance Manufacturer Precision Metals Ltd. Accepted for the RoofStar Guarantee Program October 18, 2019 Accepted for application in Roof Waterproofing Systems, Grade-level Waterproofing Systems Product Summary Aluminum pipe flashing welded to an aluminum base. See sizing chart on Technical Drawing for optional sizes. Suitable for pipe-type penetrations that terminate below top edge of flashing. Conditions and Limitations Requires fitted settlement cap (see separate listing for RoofStar-accepted caps), and must be of sufficient height to conform to Guarantee requirements (refer to the appropriate Waterproofing Standard for more information). Not for use with penetrations that do not terminate inside the flashing (i.e. cable or gas line penetrations); these require purpose-made flashings (refer to Part 11 in the appropriate Waterproofing Standard for requirements).

Click below for the Technical Drawing.

@@ Line 11: / Line 11: @@
 ;:
 ;'''Manufacturer''': [https://precisionmetals.ca/ '''Precision Metals Ltd.''']
-;Accepted for the ''RoofStar Guarantee Program'': October 2019
+;Accepted for the ''RoofStar Guarantee Program'': October 18, 2019
 ;Accepted for application in: Roof Waterproofing Systems, Grade-level Waterproofing Systems
 ;Product Summary: Aluminum pipe flashing welded to an aluminum base.  See sizing chart on Technical Drawing for optional sizes.
 :Suitable for pipe-type penetrations that terminate below top edge of flashing.
-;Conditions and Limitations: Requires fitted settlement cap (see separate listing for RoofStar-accepted caps), and must be of sufficient height to conform to Guarantee requirements (refer to the appropriate ''Waterproofing'' Standard for more information).  Not for use with penetrations that do not terminate inside the flashing (i.e. cable or gas line penetrations), which require purpose-made flashings.
+;Conditions and Limitations: Requires fitted settlement cap (see separate listing for RoofStar-accepted caps), and must be of sufficient height to conform to '''''Guarantee''''' requirements (refer to the appropriate ''Waterproofing'' Standard for more information).
+:Not for use with penetrations that do not terminate inside the flashing (i.e. cable or gas line penetrations); these require purpose-made flashings (refer to Part 11 in the appropriate ''Waterproofing'' Standard for requirements).
 |}