Difference between revisions of "Asphalt Shingle System Details"

Jump to: navigation, search

Difference between revisions of "Asphalt Shingle System Details"

 
(60 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
:[[AS Details:E2.7.1 (Shingle Application - All Slopes)|E2.7.1 Shingle Application - All Slopes]]
+
{{Template:RPM Info}}
−
:[[AS Details:E2.7.1 (Low Slope Shingle Application)|E2.7.1 Low Slope Shingle Application]]
 
−
:[[AS Details:E2.7.3 (Open Valley)|E2.7.3 Open Valley]]
 
−
:[[AS Details:E2.7.4 (Closed Cut Valley)|E2.7.4 Closed Cut Valley]]
 
−
:[[AS Details:E2.7.5 (Woven Valley)|E2.7.5 Woven Valley]]
 
−
:[[AS Details:E2.7.6 (Upper Junction Detail - Asphalt Shingle at BUR)|E2.7.6 Upper Junction Detail - Asphalt Shingle at BUR]]
 
−
:[[AS Details:E2.7.7 (Lower Junction Detail - Asphalt Shingle at BUR)|E2.7.7 Lower Junction Detail - Asphalt Shingle at BUR]]
 
−
:[[AS Details:E2.7.8 (Eave Detail - All Slopes)|E2.7.8 Eave Detail - All Slopes]]
 
−
:[[AS Details:E2.7.9 (Chimney Flashing Detail)|E2.7.1 Chimney Flashing Detail]]
 
−
:[[AS Details:E2.7.10 (Lead Vent - Typical)|E2.7.10 Lead Vent - Typical]]
 
−
:[[AS Details:E2.7.11 (Counter-flashing - Diverter Flashing)|E2.7.11 Counter-flashing - Diverter Flashing]]
 
−
:[[AS Details:E2.7.12 (Integral Flashing with Capillary Table)|E2.7.12 Integral Flashing with Capillary Table]]
 
  
 +
__NONUMBEREDHEADINGS__
 +
{{DISPLAYTITLE:<span style="position: absolute; clip: rect(1px 1px 1px 1px); clip: rect(1px, 1px, 1px, 1px);">{{FULLPAGENAME}}</span>}}
 +
__NOTOC__
  
 +
:<big><big>Division D - Construction Details</big></big>
 +
:<hr>
 +
:<big><big><big><big><big>Construction Details for Asphalt Shingle Roof Systems</big></big></big></big></big>
  
−
[[Section:E. Application: Steep Slope Roofs|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Asphalt Shingle Application'']]
+
<div class="col-md-2">
 +
:[[File:Asphalt Shingles.JPG | link=http://rpm.rcabc.org/images/8/8a/Asphalt_Shingles.JPG |175 px]]
 +
</div>
  
−
[[Section:G. Construction Details|<i class="fa fa-chevron-circle-left fa-2x" ></i> Back to ''Construction Details'']]
+
<div class="col-md-10">
 +
:The drawings linked on this page are intended to represent a variety of asphalt shingle roof system applications while remaining generic with regards to ''manufacturer's'' specific application specifications. They do not represent all possible ''manufacturer'' application roof system designs. Consult each ''manufacturer's'' specifications and the '''''RoofStar Guarantee Standards''''' to develop a system acceptable to both the manufacturer and the '''''RoofStar Guarantee Program'''''.
 +
 
 +
:For further information about Asphalt Shingle Roof System designs and requirements, see the '''[https://rpm.rcabc.org/index.php?title=Asphalt_Shingle_Systems_Standard Standard for Asphalt Shingle Roof Systems]'''.
 +
</div>
 +
 
 +
<div class="col-md-12">
 +
</div>
 +
<div class="col-md-4">
 +
<hr>
 +
===Part 6 - Air and Vapour Controls===
 +
====='''Continuity and Support''' ([[Asphalt_Shingle_Systems_Standard#6.3.2.1._Continuity_and_Support | Article 6.3.2.1.]])=====
 +
<ol>
 +
<li>[[Asphalt Shingles - Air and Vapour Controls | Air and Vapour Controls]]
 +
</li></ol>
 +
 
 +
===Part 9 - Roof Field (Shingle Systems)===
 +
====='''Application (Common and Steep Slopes)''' ([[Asphalt_Shingle_Systems_Standard#9.3.2.4. General Requirements for Asphalt Shingle Application| Article 9.3.2.4.]])=====
 +
 
 +
<ol>
 +
<li>[[Asphalt Shingles - Application (Common and Steep Slopes)| Application (Common and Steep Slopes)]]
 +
</li></ol>
 +
 
 +
====='''Application (Low Slopes)''' ([[Asphalt_Shingle_Systems_Standard#9.3.2.5. Application on Slopes Less Than 1:3 | Article 9.3.2.4.]])=====
 +
 
 +
<ol>
 +
<li>[[Asphalt Shingles - Application (Low Slopes) | Application (Low Slopes)]]
 +
</li></ol>
 +
 
 +
====='''Changes in Slope''' ([[Asphalt_Shingle_Systems_Standard#9.3.2.7. Changes in Slope | Article 9.3.2.7.]])=====
 +
 
 +
<ol>
 +
<li>[[Asphalt Shingles - Changes in Slope (Inside Angle) | {{hilite | Changes in Slope (Inside Angle) || 2020-October-21 }}]]
 +
<li>[[Asphalt Shingles - Changes in Slope (Outside Angle) | {{hilite | Changes in Slope (Outside Angle) || 2020-October-21 }}]]
 +
</li></ol>
 +
 
 +
</div>
 +
<div class="col-md-4">
 +
<hr>
 +
 
 +
===Part 10 - Perimeters and Valleys===
 +
====='''Eave and Rake Edge Details''' ([[Asphalt_Shingle_Systems_Standard#10.3.4.2._Eaves_and_Rake_Edges | Article 10.3.4.2.]])=====
 +
<ol>
 +
<li>[[Asphalt Shingles - Eaves (All Slopes) | Eaves (All Slopes)]]
 +
<li>[[Asphalt Shingles - Diverter Flashing | {{hilite | Diverter Flashing || 2020-October-21 }}]]
 +
</li></ol>
 +
 
 +
====='''Valleys''' ([[Asphalt_Shingle_Systems_Standard#10.3.5.2._General_Requirements_for_Valley_Metal_Flashing | Article 10.3.5.2.]])=====
 +
 
 +
<ol>
 +
<li>[[Asphalt Shingles - Open Valley | Open Valley]]
 +
<li>[[Asphalt Shingles - Closed (Cut) Valley| Closed (Cut) Valley]]
 +
<li>[[Asphalt Shingles - Woven Valley| Woven Valley]]
 +
</li></ol>
 +
 
 +
====='''Valley Intersections with Ridge''' ([[Asphalt_Shingle_Systems_Standard#10.3.5.9. Valley Intersection with Ridge | Article 10.3.5.9.]])=====
 +
 
 +
<ol>
 +
<li>[[Asphalt Shingles - Valley Intersection with Ridge | Valley Intersection with Ridge]]
 +
</li></ol>
 +
 
 +
====='''Intersections with Waterproofing Roof Systems''' ([[Asphalt_Shingle_Systems_Standard#10.3.7.2. Intersections with Waterproofing Roof Systems | Article 10.3.7.2.]])=====
 +
 
 +
<ol>
 +
<li>[[Asphalt Shingles - Intersection with Waterproofing Roof (Upper)| Intersection with Waterproofing Roof (Upper)]]
 +
<li>[[Asphalt Shingles - Intersection with Waterproofing Roof (Lower)| Intersection with Waterproofing Roof (Lower)]]
 +
</li></ol>
 +
 
 +
</div>
 +
<div class="col-md-4">
 +
<hr>
 +
 
 +
===Part 11 - Drainage===
 +
====='''Membrane Gutters''' ([[Asphalt_Shingle_Systems_Standard#11.3.3.8._Membrane_Gutters | Article 11.3.3.8.]])=====
 +
 
 +
<ol>
 +
<li>[[Asphalt Shingles - Membrane Gutter (Design Elements)| Membrane Gutter (Design Elements)]]
 +
</li></ol>
 +
 
 +
===Part 12 - Penetrations and Curbs===
 +
====='''Penetration Flashing''' ([[Asphalt_Shingle_Systems_Standard#12.3.2.1._General_Requirements_for_Flashing_Penetrations | Article 12.3.2.1.]])=====
 +
 
 +
<ol>
 +
<li>[[Asphalt Shingles - Cylindrical Penetration (Lead Flashing)| Cylindrical Penetration (Lead Flashing)]]
 +
<li>[[Asphalt Shingles - Cylindrical Penetration (Flashing, Storm Collar) | {{hilite | Cylindrical Penetration (Flashing, Storm Collar)|| 2022-February-5 }}]]
 +
</li></ol>
 +
 
 +
====='''Curbs''' ([[Asphalt_Shingle_Systems_Standard#12.3.2.4._Curbs_and_Sleepers | Article 12.3.2.4.]])=====
 +
 
 +
<ol>
 +
<li>[[Asphalt Shingles - Curb Flashing (Typical) | Curb Flashing (Typical)]]
 +
<li>[[Asphalt Shingles - Flashing a Masonry Chimney| Flashing a Masonry Chimney]]
 +
</li></ol>
 +
 
 +
===Part 13 - Linear Metal Flashing===
 +
:See the separate page, [[Linear_Metal_Flashing_Details | Details for Linear Metal Flashings]].
 +
 
 +
</div>
 +
 
 +
<div class="col-md-12">
 +
<hr>
 +
 
 +
[[Asphalt Shingle Systems Standard|<i class="fa fa-chevron-circle-left" ></i> ''Standard for Asphalt Shingle Roof Systems'']]
 +
 
 +
[[Main Page | <i class="fa fa-home fa"></i> Home]]
 +
{{Template:RPM Page Footer with Copyright and Current Date}}
 +
</div>

Latest revision as of 15:53, 30 June 2022



Division D - Construction Details
Construction Details for Asphalt Shingle Roof Systems
Asphalt Shingles.JPG
The drawings linked on this page are intended to represent a variety of asphalt shingle roof system applications while remaining generic with regards to manufacturer's specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult each manufacturer's specifications and the RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.
For further information about Asphalt Shingle Roof System designs and requirements, see the Standard for Asphalt Shingle Roof Systems.

Part 6 - Air and Vapour Controls

Continuity and Support ( Article 6.3.2.1.)
  1. Air and Vapour Controls

Part 9 - Roof Field (Shingle Systems)

Application (Common and Steep Slopes) ( Article 9.3.2.4.)
  1. Application (Common and Steep Slopes)
Application (Low Slopes) ( Article 9.3.2.4.)
  1. Application (Low Slopes)
Changes in Slope ( Article 9.3.2.7.)
  1. Changes in Slope (Inside Angle)
  2. Changes in Slope (Outside Angle)

Part 10 - Perimeters and Valleys

Eave and Rake Edge Details ( Article 10.3.4.2.)
  1. Eaves (All Slopes)
  2. Diverter Flashing
Valleys ( Article 10.3.5.2.)
  1. Open Valley
  2. Closed (Cut) Valley
  3. Woven Valley
Valley Intersections with Ridge ( Article 10.3.5.9.)
  1. Valley Intersection with Ridge
Intersections with Waterproofing Roof Systems ( Article 10.3.7.2.)
  1. Intersection with Waterproofing Roof (Upper)
  2. Intersection with Waterproofing Roof (Lower)

Part 11 - Drainage

Membrane Gutters ( Article 11.3.3.8.)
  1. Membrane Gutter (Design Elements)

Part 12 - Penetrations and Curbs

Penetration Flashing ( Article 12.3.2.1.)
  1. Cylindrical Penetration (Lead Flashing)
  2. Cylindrical Penetration (Flashing, Storm Collar)
Curbs ( Article 12.3.2.4.)
  1. Curb Flashing (Typical)
  2. Flashing a Masonry Chimney

Part 13 - Linear Metal Flashing

See the separate page, Details for Linear Metal Flashings.

Standard for Asphalt Shingle Roof Systems

Home

© RCABC 2024
RoofStarTM is a registered Trademark of the RCABC.
No reproduction of this material, in whole or in part, is lawful without the expressed permission of the RCABC Guarantee Corp.

Retrieved from "http://rpm.rcabc.org/index.php?title=Asphalt_Shingle_System_Details&oldid=43412"