Asphalt Shingle System Details

The drawings contained within this section are intended to represent a variety of asphalt shingle applications while remaining generic with regards to manufacturers’ specific application specifications. They do not represent all possible manufacturer application roof system designs. Consult manufacturers’ specifications and RoofStar Guarantee Standards to develop a system acceptable to both the manufacturer and the RoofStar Guarantee Program.

For further information about asphalt shingle roof designs and requirements, see Asphalt Shingles Roof Assemblies.

NOTE: 'PDF' shown after a file name below indicates a downloadable print sheet is available for Construction Details. Click on the detail link and look for the icon.

---

E2.7.1 Shingle Application - All Slopes

E2.7.2 Low Slope Shingle Application

E2.7.3 Open Valley

E2.7.4 Closed Cut Valley

E2.7.5 Woven Valley

E2.7.6 Upper Junction Detail - Asphalt Shingle at BUR

---

E2.7.7 Lower Junction Detail - Asphalt Shingle at BUR

E2.7.8 Eave Detail - All Slopes

E2.7.9 Chimney Flashing Detail

E2.7.10 Lead Vent - Typical

E2.7.11 Counter-flashing - Diverter Flashing

E2.7.12 Integral Flashing with Capillary Table

E2.7.13 Built-in Gutter

Back to Asphalt Shingle Roof Assemblies

Back to Construction Details Section