Difference between revisions of "ASM Cylindrical Penetration (Flexible Boot Flashing)"

Revision as of 14:45, 25 April 2019

RoofStar Guarantee Standards are blue-linked

ASM Details

Click below for a printable version of this page.

(1) Architectural Metal Roof Panel
(2) Water Tight Back Up Storm Collar: Installed where practical.
(3) Seal Between Pipe And Flashing: Continuous tooled bead of accepted caulking.
(4) Stainless Steel Drawband
(5) Preformed Penetration Collar
(6) High-domed Gasketed Cladding-type Screws: Flange fastened to manufacturer's specifications.
(7) Flange: Set in two continuous beads of accepted caulking.
(8) Separation Layer (Drainage Mat): Required for slopes less than 1:3; recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
(9) Underlayment: The type of underlay required is determined by roof slope.

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

Revision as of 21:44, 24 April 2019 (view source) James Klassen (talk \| contribs) ← Older edit	Revision as of 14:45, 25 April 2019 (view source) James Klassen (talk \| contribs) m (James Klassen moved page ASM 11.1 Pipe Flashing to ASM 11.1.1 Pipe Flashing) Newer edit →
(No difference)