Difference between revisions of "Template:MARS Membrane - TPO"

Latest revision as of 14:27, 7 April 2020


Manufacturer	Product Name	Number of Tested Systems (per report)	kPa (Low)	kPa (High)	Psf (Low)	Psf (High)	Deck Type	Downloadable Test Report	Test Facility	Test Facility Report No.
Carlisle Syntec Systems Canada	Sure-Weld 45 mil TPO Membrane	1 Tested System 1 Tested System	---- ----	-3.40 -3.40	---- ----	-70.00 -71.00	Steel Steel	MARS Test Report 3 MARS Test Report 4	exp. Service Inc.	PUB-DRU236018 PUB-DRU168402
Firestone Building Products	Ultraply 1.2 mm TPO Membrane	1 Tested System 2 Tested Systems 1 Tested System 1 Tested System	---- -3.80 ---- ----	-3.20 -4.20 -3.80 -3.00	---- -80.00 ---- ----	-67.00 -87.00 -80.00 -63.00	Steel Steel Steel Steel	MARS Test Report 3 MARS Test Report 4 MARS Test Report 5 MARS Test Report 6	exp. Service Inc.	PUB-DRU303384 PUB-DRU168455 PUB-DRU303385 PUB-DRU168431
Firestone Building Products	UltraPly 1.6 mm TPO Membrane	1 Tested System 2 Tested Systems 1 Tested System 1 Tested System	---- -3.80 ---- ----	-3.20 -4.20 -3.80 -3.00	---- -80.00 ---- ----	-67.00 -87.00 -80.00 -63.00	Steel Steel Steel Steel	MARS Test Report 3 MARS Test Report 4 MARS Test Report 5 MARS Test Report 6	exp. Service Inc.	PUB-DRU303384 PUB-DRU168455 PUB-DRU303385 PUB-DRU168431
Johns Manville Corporation	JM TPO-45	1 Tested System	----	-3.6 -5.0	----	-75.0 -105.0	Steel Steel	MARS Test Report 3 MARS Test Report 4	exp. Service Inc.	PUB-DRU292367 PUB-DRU292360
Johns Manville Corporation	JM TPO-60	1 Tested System	----	-3.6 -5.0	----	-75.0 -105.0	Steel Steel	MARS Test Report 3 MARS Test Report 4	exp. Service Inc.	PUB-DRU292367 PUB-DRU292360
Johns Manville Corporation	JM TPO-80	1 Tested System	----	-3.6 -5.0	----	-75.0 -105.0	Steel Steel	MARS Test Report 3 MARS Test Report 4	exp. Service Inc.	PUB-DRU292367 PUB-DRU292360

@@ Line 1: / Line 1: @@
-:'''How to use the table'''
-#In the table below look for <u>maximum wind uplift values that equal or exceed</u> the requirements determined through the RCI calculator;<br>('''NOTE''': while the reports show two different values for tested maximum assembly strength, the RPM tables display only the values adjusted for the required safety factor of 1.5)
-#Open the report for the tested assembly that fits with the design parameters you have chosen and calculated, and examine the report.  It will break down the assembly by its components.  Ensure all the key components (Secondary materials, such as deck overlay, insulation and insulation overlay) are accepted by the '''''RoofStar Guarantee Program''''' (note that fasteners and adhesives currently are not listed in this Manual - use the materials specified in the wind test report, or consult the membrane manufacturer);
-#In cases where a tested Secondary material is not accepted by the '''''RoofStar Guarantee Program''''', look for alternates which often are published in the each report.  In the absence of published alternates,  consult the listed manufacturer for alternates that are accepted by the '''''RoofStar Guarantee Program''''', and obtain the manufacturer's written approval.
 <div class="table-responsive">
 <table class="table">