Difference between revisions of "ASM Eave and Rake Edges (Mechanical Seams)"

Revision as of 21:28, 17 August 2020

RoofStar Guarantee Standards are blue-linked

ASM Details

1 WORK INCLUDED

(1) Architectural Metal Roof Panel
(2) Ventilation Layer: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
(3) Underlayment: The type of underlay required is determined by roof slope.
(4) Metal Panel Clip: Installed to metal roof panel manufacturer’s printed instructions.
(4) Architectural Metal Roof Panel
(5) Eave Protection: One ply of self-adhered modified bituminous underlayment material. Lap 50 mm (2") minimum on sides and 100 mm (4") minimum on ends.
(6) Metal flashing underlayment/separation membrane: required for metal flashings installed on wood substrates.
(7) Edge Metal Flashing (Continuous)
(8) Continuous metal cleat

2 RELATED WORK BY OTHERS

(A) Acceptable Deck
(B) Fascia Board

NOTE: Refer to RoofStar Guarantee Standards for additional requirements.

RoofStar Guarantee Standards for ASM Roof Assemblies

Back to ASM Construction Details

Back to Construction Details

@@ Line 8: / Line 8: @@
 <div style="text-align:center; vertical-align:center">
 [[File:ASM 10.1.1 Eave and Rake Flashing (Mechanical Seam).jpg|class=img-responsive]]
+</div>
+<div style="width:150px; text-align: left;">
+:[[File:ASM 10.3.1 Thumb for PDF.jpg|100 px|link=http://rpm.rcabc.org/images/5/5c/ASM_10.1.1_Eave_and_Rake_Flashing_%28Mechanical_Seam%29.pdf|'''Print Sheet''']]
 </div>
 </div><!-- COL-MD-6 -->
@@ Line 13: / Line 17: @@
 <div class="col-md-6">
 === WORK INCLUDED ===
-;(1) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMICE|'''Ice and Water Protection''']]: Accepted self-adhered modified bituminous membrane.
+;(1) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMPANEL |'''Architectural Metal Roof Panel''']]
-;(2) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMSLIP|'''Slip Sheet''']]: Recommended over asphaltic underlays and / or as required by metal panel manufacturer.
+;(2) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMSLIP|'''Ventilation Layer''']]: Recommended over asphaltic underlays and / or as required by metal roof panel manufacturer.
-;(3) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMCLIP|'''Metal Panel Clip''']]: Installed to metal roof panel manufacturer&#8217;s printed instructions.
+;(3) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMUNDERLAYMENT|'''Underlayment''']]: The type of underlay required is determined by roof slope.
+;(4) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMCLIP|'''Metal Panel Clip''']]: Installed to metal roof panel manufacturer&#8217;s printed instructions.
 ;(4) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMPANEL |'''Architectural Metal Roof Panel''']]
-;(5) '''Continuous Metal Cleat'''
+;(5) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMUNDERLAYMENT|'''Eave Protection''']]: One ply of self-adhered modified bituminous underlayment material. Lap 50 mm (2") minimum on sides and 100 mm (4") minimum on ends.
-;(6) '''Metal Fascia Flashing'''
+;(6) Metal flashing underlayment/separation membrane: required for metal flashings installed on wood substrates.
 ;(7) '''Edge Metal Flashing (Continuous)'''
+;(8) '''Continuous metal cleat'''
 <hr>
@@ Line 25: / Line 31: @@
 === RELATED WORK BY OTHERS ===
 ;(A) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMDECK|'''Acceptable Deck''']]
-;(B) [[RoofStar Guarantee Standards for ASM Roof Assemblies#ASMNAILER |'''Wood Nailer''']]
+;(B) '''Fascia Board'''
-;(C) '''Fascia Board'''
 </div><!-- COL-6-MD -->
 </div><!-- PANEL BODY -->